Nortel Call Pilot Mini Call Pilot Mini 150 Instructions Manual

Chapter 5  Initializing the CallPilot Mini/CallPilot 150    41
CallPilot Mini/CallPilot 150 Installation and Maintenance Guide
 
Table 14   Quick Install Wizard parameters for a CallPilot 150
Field name Description
IP Address Enter the IP Address for the CallPilot 150. If you do not know the IP Address, contact 
your network administrator.
This is the IP Address you will use to access the  CallPilot 150 using CallPilot Manager.
Changes to the IP Address take effect when you reboot the CallPilot 150. 
If...

42    Chap ter 5  Initializing the CallPilot Mini/CallPilot 150
P099 0474 0 3
 
4Click the  Install button.
5 If you are initializing a CallPilot Mini, reboot the CallPilot Mini.
You can now start programming the CallPilot parameters. For information about how to program 
CallPilot, refer to the  CallPilot Manager Set Up and Operation Guide .
Country Select the country in which the CallPilot 150 is installed. 
The country you select determines several country specific settings  such as the 
telephone...

Chapter 5  Initializing the CallPilot Mini/CallPilot 150    43
CallPilot Mini/CallPilot 150 Installation and Maintenance Guide
 
Initializing CallPilot 150 using a telephone
To initialize CallPilot 150 you need to:
 determine the CallPilot 150 Feature Codes
 configure the CallPilot 150 initial parameters
Determining CallPilot 150 Feature Codes
Default Feature Codes are assigned to CallPilot 150 by the Norstar system. These default codes are 
listed in Table 15. When these default Feature Codes are used...

44    Chap ter 5  Initializing the CallPilot Mini/CallPilot 150
P099 0474 0 3
 
3Press  NEXT to show the next Feature Code used by CallPilot. Record this code in  Table 15 and 
on the  CallPilot Programming Record  or the Call Center Programming Record .
4 Repeat step 3 until you reach the final Feature Code.
5 Press  QUIT
 to end this session.
Configuring the CallPilot 150 initial parameters
To configure the CallPilot 150 initial parameters:
1. Press ≤\b°‹ .
This is the default System Administration...

Chapter 5  Initializing the CallPilot Mini/CallPilot 150    45
CallPilot Mini/CallPilot 150 Installation and Maintenance Guide
 
You can now start programming the CallPilot parameters. For information about how to program 
the CallPilot, refer to the CallPilot Set Up and Operation Guide. 7. Press CHNG
 to toggle the settings between Y for Yes, or N for 
No.
8. Press  NEXT
.
When you choose N (No) for the enable Group List option, 
steps 9 and 10 are not required and the system automatically 
goes to step...

46    Chap ter 5  Initializing the CallPilot Mini/CallPilot 150
P099 0474 0 3
  

47
CallPilot Mini/CallPilot 150 Installation and Maintenance Guide
 
Chapter 6
Language Configuration Utility
The CallPilot Mini/CallPilot 150 has two languages available for text and voice prompts. The 
Language Configuration Utility allows you to change the two languages that are available.
The computer you use to run the Language Configuration Utility must be compatible with 
Microsoft
® Windows® and have a network connection to the CallPilot Mini/CallPilot 150.
Changing the languages available
To...

48    Chap ter 6  Langu age Configuration Utility
P099 0474 0 3
 
15Check the information that appears on this screen. 
If the information is correct, click the  Finish button.
If the information is not correct, click the  Back button and correct the information before 
proceeding.
A dialog box appears when the language change is completed.
16 Click the  OK button.
17 If you want to change the second language, repeat steps 4 to 16 for the second language.
18 Reboot the CallPilot Mini/CallPilot 150 by...

49
CallPilot Mini/CallPilot 150 Installation and Maintenance Guide
 
Chapter 7 
Password administration
Resetting passwords
This section identifies each type of CallPilot password and how to reset it if the owner forgets it.
Resetting the system administrator password
This is the password the system administrator uses to reach the administrative functions, including 
resetting other passwords. The default is 0000. The system makes the users reset their passwords 
the first time they access their...

50    Chap ter 7  Password administration
P099 0474 0 3
 
Resetting the operator password (CallPilot 150 only)
The operator password is used to gain access to operator manager functions, such as open and 
close business, change attendant DNs and enable and disable call answering.
Resetting the password using CallPilot Manager
1Log on to CallPilot Manager.
2 Click the  Operations  heading.
3 Click the  Operator Settings  link.
4 Select the  Reset Operator Password  check box.
5 Click the  Submit button....