Nortel Call Pilot Mini Call Pilot Mini 150 Instructions Manual

71
CallPilot Mini/CallPilot 150 Installation and Maintenance Guide
 
Appendix A
Modem Access
When there is no access to the CallPilot Mini/CallPilot 150 using a LAN connection or the serial 
port, you can use the modem to access to CallPilot Mini/CallPilot 150.  
Configuring your computer to access the CallPilot modem
To configure your computer to access the CallPilot modem, you must:
 connect a telephone to your computer modem
 create a Dial-Up Networking connection
 install the Nortel Networks Modem...

72      Modem Access
P099 0474 0 3
 
If your computer has a modem with one telephone cable connector, you need to use a telephone 
line splitter. To connect the line splitter:
1Disconnect the telephone line for the modem from the wall outlet.
2 Insert the line splitter into the wall outlet.
3 Connect the telephone line for the modem to one of the connectors on the line splitter.
4 Connect the telephone line for the telephone to the other connector on the line splitter.
Creating a Dial-Up Networking...

  Modem Access    73
CallPilot Mini/CallPilot 150 Installation and Maintenance Guide
 
3In the Advanced options box, select the Log on to network option:
4In the Advanced options box, clear the following options:
Enable software compression 
Require encrypted password 
Require data encryption 
Record a log file for this connection 
5In the Allowed network protocols box, select the TCP/IP option.
6In the Allowed network protocols box, clear the following options:
NetBEUI 
IPX/SPC Compatible 
7Click the...

74      Modem Access
P099 0474 0 3
 
Configuring the Dial-Up Networking TCP/IP parameters on Windows NT 4.0
1Click the  Configure  button.
2 Click the  Initial speed  drop list and then click  115200.
3 Select the  Enable hardware flow control  option.
4 Clear the following options:
Enable modem error control  
Enable modem compression  
5 Click the  OK button.
6 Click the  Server tab.
7 Click the  Dial-Up server type  drop list, and then click the  PPP:Internet, Windows 95/98/
NT4  option.
8 Select the...

  Modem Access    75
CallPilot Mini/CallPilot 150 Installation and Maintenance Guide
 
Creating a Dial-Up Networking connection on Windows 2000
1Click the Start button and then click Programs.
2Click Accessories and then click Communications.
3Click Network and Dial-Up Connections.
The Network and Dial-Up Connections dialog box appears.
4Click the Make new Connection icon.
The Network Connection Wizard appears.
5Select the Dial-up to the Internet option.
6Click the Next button.
7Select the I want to set...

76      Modem Access
P099 0474 0 3
 
Configuring the Dial-Up Networking TCP/IP parameters on Windows 2000
1Right click on the Dial-Up Networking connect ion you created for CallPilot and then click 
Properties .
2 Click the  Configure  button.
3 Select the  Enable hardware flow control  option.
4 Clear the following options:
Enable modem error control  
Enable modem compression  
Show Terminal window  
Run script options  
5 Click the  OK button.
6 Click the  Security tab.
7 Select the  Advanced (custom...

  Modem Access    77
CallPilot Mini/CallPilot 150 Installation and Maintenance Guide
 
Installing the Nortel Networks Modem Configuration Utility
Your modem requires a special configuration to access the CallPilot modem. The Modem 
Configuration Utility allows you to easily switch between the configuration for the CallPilot 
modem and the configuration for normal modem use.
To install the Nortel Networks Modem Configuration Utility:
1Load the CallPilot CD in the CD-ROM drive of your computer.
2Open the...

78      Modem Access
P099 0474 0 3
 
Enabling the modem on the CallPilot Mini/CallPilot 150
You must enable the CallPilot modem before you access the system using the modem. 
Enabling Modem access using CallPilot Manager
1Log on to CallPilot Manager.
2 Click the  Configuration  heading.
3 Click the  Access Passwords  link.
4 Enter a password in the  Modem Access box.
5 Enter the password again in the  Confirmation box.
6 Click the  Submit button.
Enabling Modem access using a telephone (CallPilot 150...

  Modem Access    79
CallPilot Mini/CallPilot 150 Installation and Maintenance Guide
 
Changing the modem access password using a telephone 
(CallPilot 150 only)
Follow this procedure to change the Modem access password using a telephone.  
Disabling the Modem access password using a telephone 
(CallPilot 150 only)
Follow this procedure to disable the Modem access password using a telephone.  1. Press 
≤·°‹.
2. Enter the system administration mailbox number and 
password.
3. Press ›.
4. Press NEXT
.
5....

80      Modem Access
P099 0474 0 3
 
Connecting to the CallPilot system
To connect to the CallPilot system you must:
 configure your modem to access the CallPilot modem
 connect to the CallPilot modem
Configuring your modem to access the CallPilot modem
The CallPilot modem requires a special configuration for access. This requirement helps prevent 
unauthorized access to the CallPilot system.
To configure your modem:
1Open the folder that contains the Nortel Networks Modem Configuration Utility....