Nitsuko Ds2000 Software Manual

Direct Station Selection (DSS) Console
DS2000 Software ManualChapter 1: Features103
To use your DSS Console Hotline key:
1. Press key to call Hotline partner.
To use your DSS Console Call Coverage key:
You can set up the Call Coverage key for immediate ring, delayed ring , or no ring.
1. Press key to call covered extension or pick up ringing call.
To use your DSS Console Group Call Pickup key:
You can set up the Group Call Pickup key for immediate ring, delayed ring , or no ring.
1. Press key to answer...

Direct Station Selection (DSS) Console
104Chapter 1: FeaturesDS2000 Software Manual
To use your DSS Console Page Zone key:
1. Press key to Page into assigned zone.
To use your DSS Console System Speed dial key:
1. Press key to dialed stored number.
System Speed Dial keys provide no BLF.
To use your DSS Console Personal Speed dial key:
1. Press key to dialed stored number.
Personal Speed Dial keys provide no BLF.
To use your DSS Console Conversation Record key:
You must have Voice Mail installed to use...

Direct Station Selection (DSS) Console
DS2000 Software ManualChapter 1: Features105
To use your DSS Console ICM Directory key:
1. Press key to access Intercom Directory Dialing.
To use your DSS Console Reverse Voice Over key:
1. While on a handset call, press key to place Private Intercom call to covered extension.
To use your DSS Console Message Center key:
1. Press key to see how many messages are waiting in the Message Center.
OR
Press
 SPK + key to call Message Center mailbox.
To use your DSS...

Direct Trunk Access
106Chapter 1: FeaturesDS2000 Software Manual
Direct Trunk  Access
Description
Direct Trunk Access lets an extension user access (seize) an individual trunk. After seizing the 
trunk, the user can dial any outside telephone number without restriction. An extension’s Class of 
Service allows or denies Direct Trunk Access. Direct Trunk Access is normally only provided for 
attendants, priority users and maintenance personnel.
Conditions
None
Default Setting
Disabled
Programming Guide...

Direct Trunk Access
DS2000 Software ManualChapter 1: Features107
Programming List
Program 0501 - Numbering Plan (page 392)
Change the digit that user’s dial for Direct Trunk Access if 4 does not meet the site require-
ments.
Program 0101 - Direct Trunk Access (page 364)
Enter Y to enable an extension to use Direct Trunk Access. Note that enabling Direct Trunk 
Access allows the user to bypass Toll Restriction.
Program 1801 - Extension Class of Service Assignment (page 450)
Assign Class of Service to...

Directed Call Pickup
108Chapter 1: FeaturesDS2000 Software Manual
Directed Call Pickup
Description
Directed Call Pickup permits an extension user to intercept a call ringing another extension. With 
Directed Call Pickup, an extension user can pick up:
Trunk (Key Ring) calls ringing an extension
Direct Inward Lines
Transferred trunk calls
Ringing Intercom calls.
Recalls (e.g., Hold recall)
Conditions
None
Default Setting
Enabled
Programming Guide
None
Programming List
Program 1803 - Extension Line...

Directed Call Pickup
DS2000 Software ManualChapter 1: Features109
Feature Operation
To use Directed Call Pickup to intercept a call to a co-worker’s extension:
1. Lift handset.
2. Dial 
* *.
3. Dial number of extension whose call you want to intercept.
To intercept a call ringing an attendant, dial the attendant’s extension number (e.g., 
300). Do not dial 0 or 01-04.Call ringing co-worker’s extension.
N/A.
Conversation with intercepted caller.
N/A. 

Directory Dialing
110Chapter 1: FeaturesDS2000 Software Manual
Directory Dialing
Description
Directory Dialing allows a display keyset user to select a co-worker or outside call from a list of 
names, rather than dialing the phone number. There are three types of directory Dialing:
C– System (Company-Wide) Speed Dial names.
I– Intercom names (including extension, Ring Group and UCD Group names).
P– Personal Speed Dial names.
Conditions
None
Default Setting
Directory Dialing always enabled, but no...

Directory Dialing
DS2000 Software ManualChapter 1: Features111
Programming List
Program 0401 - Intercom Inter-digit (page 375)
If an extension user initiates Directory Dialing but doesn’t make an entry within this interval, 
the system automatically cancels Directory Dialing.
Program 1701 -  ICM Directory Key (page 438)
Assign an Intercom Directory Dialing key to a keyset (code 21).
Program 1704 -  ICM Directory Key (page 447)
Assign an Intercom Directory Dialing key to a DSS Console (code 21).
Other...

Directory Dialing
112Chapter 1: FeaturesDS2000 Software Manual
To scroll alphabetically through the selected directory, press VO L  or VOL . To call 
the displayed name, just press 
DIAL.
3. Dial the first letter of the desired name.
For example, dial 4 if the first letter in the name begins with G, H or I. The display 
4. Look at your phone’s display and dial the digit for the letter/number you want to call.
In the example above, if the name begins with G, dial 1. If the name begins with H, dial 
2. If...