Nitsuko Ds2000 Software Manual
Here you can view all the pages of manual Nitsuko Ds2000 Software Manual. The Nitsuko manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 81
Class of Service DS2000 Software ManualChapter 1: Features73 Class of Service Description Class of Service (COS) sets various features and dialing options for extensions. The system allows any number of extensions to share the same Class of Service. The table below shows each Service Option. Refer to the individual features referenced in the table for more. Conditions None Default Setting You should normally assign the attendant Class of Service 1. All other extensions are normally Class of Service...
Page 82
Class of Service 74Chapter 1: FeaturesDS2000 Software Manual Extended RingUse this option to enable or disable Extended Ringing at the extension. • See Extended Ringing on page 119 for more.EXTENDED RING?Y = Enabled N = DisableN PrivacyUse this option to enable or disable Privacy at the extension. • See Privacy on page 226 for more.PRIVACY? Y = Enable N = DisableN Trunk (Line) Queuing PriorityUse this option to enable or disable Trunk (Line) Queuing Priority at the extension. If more than one...
Page 83
Class of Service DS2000 Software ManualChapter 1: Features75 Access Page Zone 5Use this option to enable or disable an exten- sion’s ability to make a Paging announce- ment into zone 5. • See Paging on page 214 for more.PAGE ZONE 5?Y = Enable N = DisableY Access Page Zone 6Use this option to enable or disable an exten- sion’s ability to make a Paging announce- ment into zone 6. • See Paging on page 214 for more.PAGE ZONE 6?Y = Enable N = DisableY Access Page Zone 7Use this option to enable or disable an...
Page 84
Class of Service 76Chapter 1: FeaturesDS2000 Software Manual Programming Guide Direct Trunk AccessUse this option to enable or disable an exten- sion’s ability to use Direct Trunk Access. Note that enabling Direct Trunk Access allows the user to bypass Toll Restriction. • See Central Office Calls, Placing on page 63 for more.DIRECT TRK ACCES?Y = Enable N = DisableCOS 1 = Y COS 2-15 = N Remote Call Forwarding / Alternate Attendant• This option is currently not imple- mented. REMOTE FWRD?Y = Enable...
Page 85
Class of Service DS2000 Software ManualChapter 1: Features77 Programming List Program 0101 - Class of Service Options (page 362) Set Class of Service options for extensions, OPX trunk and tie lines. Program 1001 - Trunk Class of Service Assignment (page 420) Assign Class of Service (1-15) to OPX trunks and tie lines. Program 1801 - Extension Class of Service Assignment (page 450) Assign Class of Service (1-15) to extension’s. Other Related Features Refer to the Class of Service chart above. Attendant...
Page 86
Computer Telephony Integration 78Chapter 1: FeaturesDS2000 Software Manual Computer Telephony Integration Description LCCPU 01.00.00 Not available.
Page 87
Conference DS2000 Software ManualChapter 1: Features79 Conference Description Conference lets an extension user add additional inside and outside callers to their conversation. The following table shows the system’s Conference capacities: The system’s 32 Conference circuits are dynamically allocated as users request them. Conditions None Default Setting Conference enabled. Programming Guide None Programming List Program 1803 - Extension Line Access Assignments (page 461) An extension can join a...
Page 88
Conference 80Chapter 1: FeaturesDS2000 Software Manual Monitor / Silent Monitor (page 192) An extension user cannot Monitor a Conference. Privacy Release Groups (page 228) Tandem Trunking / Unsupervised Conference (page 307) Off-Hook Signaling (page 205) After hearing off-hook signals, an extension user can Conference their active call with the waiting call. Reverse Voice Over (page 245) An extension user cannot add an incoming Reverse Voice Over call to a Conference. Voice Over (page 350) An extension...
Page 89
Data Communications Interface (DCI) DS2000 Software ManualChapter 1: Features81 Data Communications Interface (DCI) Description LCCPU 01.00.00 Not available.
Page 90
Delayed Ringing 82Chapter 1: FeaturesDS2000 Software Manual Delayed Ringing Description Delayed Ringing allows a trunk to start ringing a preset interval after the call starts flashing a line key. This is helpful for co-workers that cover each other’s calls.For example, a secretary can have Delayed Ringing for the trunks that ring the boss’s telephone. If the boss doesn’t answer after the Delayed Ringing interval, the call will start ringing the secretary’s extension. Conditions None Default Setting...