Nitsuko Ds2000 Software Manual

Automatic Ring Down
DS2000 Software ManualChapter 1: Features33
Automatic Ring Down
Description
LCCPU 01.00.00 Available. See Ringdown Extension on page 249. 

Automatic Route Selection
34Chapter 1: FeaturesDS2000 Software Manual
Automatic Route Selection
Description
LCCPU 01.00.00 Not available. 

Background Music
DS2000 Software ManualChapter 1: Features35
Background Music
Description
Background Music (BGM) sends music from a customer-provided music source to speakers in key-
sets. If an extension user activates it, BGM plays whenever the extension is idle. Incoming calls and 
Paging announcements temporarily override (turn off) Background Music. 
Background Music requires a customer-provided music source. You connect the Background Music 
music source to pins 3 and 6 in the CPU’s 8-pin mod...

Background Music
36Chapter 1: FeaturesDS2000 Software Manual
Programming List
Program 0201 - Background Music (page 368)
Enter Y for this option to enable Background Music system-wide.
Program 1802 - BGM (page 457)
Enter Y to enable Background Music at the extension.
Other Related Features
Do Not Disturb (page 114)
DND does not affect the operation of Background Music.
Headset Compatibility (page 154)
Background Music plays in the headset when the extension is in the headset mode.
Music On Hold (page...

Barge In (Intrusion)
DS2000 Software ManualChapter 1: Features37
Barge In (Intrusion)
Description
Barge In permits an extension user to break into another extension user’s established call. This sets 
up a three-way conversation between the intruding extension and the two parties on the initial call. 
The user can Barge In on an Intercom call or a trunk call.
Conditions
Barge-In uses a system Conference circuit. See Conference on page 79 for more.
Default Setting
Disabled
Programming Guide
LCCPU...

Barge In (Intrusion)
38Chapter 1: FeaturesDS2000 Software Manual
Programming List
Program 0101 - Barge-In (Intrusion) (page 362)
In an extension’s Class of Service, enter Y to allow the extension to Barge In on another exten-
sion.
Program 0101 - Privacy (page 363)
In an extension’s Class of Service, enter N to disable Privacy for the extension.
Program 1801 - Extension Class of Service Assignment (page 450)
Assign Class of Service to extensions.
Other Related Features
Attendant Position (page 24)
Since...

Battery Backup
DS2000 Software ManualChapter 1: Features39
Battery Backup
Description
In the event of commercial AC power failure, the battery on the CPU PCB provides short-term 
backup of system memory and the system time and date (Real Time Clock). This battery will hold 
memory and time and date for up to 10-14 days. When commercial AC power is restored, the sys-
tem restarts with all programming and the time and date intact.
Additional Battery Backup capability can be provided by a customer-supplied...

Call Coverage Keys
40Chapter 1: FeaturesDS2000 Software Manual
Call Coverage Keys
Description
A keyset can have Call Coverage Keys for a co-worker’s extensions, Ring Group master numbers 
and UCD group master numbers. The Call Coverage Key lights when the co-worker’s extension is 
busy,  flashes slowly when the co-worker has an incoming call, and flashes fast when the co-worker 
is in Do Not Disturb. The Call Coverage Key can ring immediately when a call comes into the cov-
ered extension, ring after a...

Call Coverage Keys
DS2000 Software ManualChapter 1: Features41
Programming Guide
Programming List
Program 0403 - Call Coverage Delay (page 387)
For extensions with Delayed Ringing Call Coverage keys, set how long a call flashes the key 
at an extension before it starts to ring.Step-by-step guide for setting up Call 
Coverage Keys
Step 1: Should the Call Coverage key have Immediate Ring, No Ring or Delayed Ring?
• For keysets, in Program 1701 - Call Coverage 
Immediate Ring (page 437), enter code 06 + the...

Call Coverage Keys
42Chapter 1: FeaturesDS2000 Software Manual
Program 1701 - Programmable Function Key Assignments (page 436)
Assign a programmable key on an extension as a Call Coverage Key (code 06 = immediate 
ring key, code 07 = no ring key, code 08 = delay ring key). The option is 300-331 (covered 
extension number).
Program 1704 - DSS Console Key Assignment (page 444)
Assign a programmable key on an extension as a Call Coverage Key (code 06 = immediate 
ring key, code 07 = no ring key, code 08 =...