Nitsuko Ds2000 Software Manual

Delayed Ringing
DS2000 Software ManualChapter 1: Features83
Other Related Features
Call Coverage Keys (page 40)
Delayed Ringing is also available for Call Coverage Keys.
Private Line (page 231)
Consider having Delayed Ringing for Private Lines. Users with Delayed Ringing will ring for 
the Private Line only if it is not answered.
Feature Operation
None 

Dial Number Preview
84Chapter 1: FeaturesDS2000 Software Manual
Dial Number Preview
Description
Dialing Number Preview lets a display keyset user dial and review a number before the system dials 
it out.
Conditions
None
Default Setting
Enabled
Programming Guide
None
Programming List
None
Other Related Features
Central Office Calls, Placing (page 63)
Dial Number Preview allows an extension user to review a number before the system dials it 
out.
Feature Operation
To dial using Dial Number Preview:
1. Do...

Dial Number Preview
DS2000 Software ManualChapter 1: Features85
To correct the displayed digits before dialing them out:
1. Use VOL 
 and VOL  until the cursor replaces the digit you want to change.
VOL 
 moves the cursor to the left. VOL   moves the  cursor to the right.
2. Dial the digit that you want to replace the cursor.
3. Press VOL 
 and VOL  to place the cursor over any other digits you want to edit.
OR
Press VOL 
 until the entire number displays to the left of the cursor.
The system...

Dial Tone Detection
86Chapter 1: FeaturesDS2000 Software Manual
Dial Tone  Detection
Description
LCCPU 01.00.00 Not available. 

Direct Inward Dialing
DS2000 Software ManualChapter 1: Features87
Direct Inward Dialing
Description
LCCPU 01.00.00 Not available. 

Direct Inward Line
88Chapter 1: FeaturesDS2000 Software Manual
Direct Inward Line
Description
A Direct Inward Line (DIL) is a trunk that rings an extension directly. Since DILs only ring one 
extension, employees always know which calls are for them. For example, a company operator can 
have a Direct Inward Line for International Sales Information. When outside callers dial the DIL’s 
phone number, the call rings the operator on the International Sales line key. The DIL does not ring 
other extensions....

Direct Inward Line
DS2000 Software ManualChapter 1: Features89
Programming Guide
Step-by-step guide for setting up Direct 
Inward Line (Page 1 of 3)
Step 1: Check to be sure each trunk’s circuit type matches the connected trunk circuit.
• In Program 1001 - Trunk Circuit Type (page 416), 
enter the correct circuit type for each trunk (51 = 
loop start DTMF, 52 = loop start DP).
Step 2: Assign the DIL day mode destination.
• In Program 1003 - Direct Termination (Day) 
(page 426), assign the DIL day mode...

Direct Inward Line
90Chapter 1: FeaturesDS2000 Software Manual
Step 6: Do you want an unanswered DIL to overflow during the night mode?
• In Program 1003 - Activate Overflow at Night 
(page 427), enter Y.
• In Program 1003 - Activate Overflow at Night 
(page 427), enter N.
Step 7: Assign the DIL night overflow destination.
• In Program 1003 - Night Overflow Destination 
(page 427), assign the DIL night mode termina-
tion. The destination can be an extension, UCD 
Group master number, Ring Group master num-...

Direct Inward Line
DS2000 Software ManualChapter 1: Features91
Programming List
Program 0401 - DIL No Answer (page 376)
If DIL Overflow is set up, this interval determines how long a DIL rings its destination before 
ringing its programmed overflow destination. If DIL Overflow is not set up, this interval deter-
mines how long a DIL rings is destination before diverting to Key Ring.
Program 0401 - Transfer Recall (page 375)
This interval sets how long a call will ring the day or night overflow destination...

Direct Inward Line
92Chapter 1: FeaturesDS2000 Software Manual
Program 1003 - Direct Termination (Night) (page 426)
Set the night termination (answering point) for the DIL. The DIL rings the answering point 
directly.  The destination can be an extension, UCD Group master number, Ring Group master 
number or Voice Mail master number.
Program 1003 - Activate Overflow at Night (page 427)
Enable Y to enable DIL overflow during the night mode. (Entering N for this option has the 
same affect as entering Y...