Nitsuko Digital System Feature And Terminal Programming Manual

SILENT MONITOR
Description
Silent Monitor lets an extension user listen to the conversation at a busy extension.  To implement Silent Moni-
tor, an extension user just calls a busy extension and dials the Silent Monitor code.  The busy extension and their
caller have no indication of the intrusion.  There are no tones heard and there is no visual indication that monitor-
ing is occurring.  For example, Silent Monitor could help the supervisor of a service department.  The depart-
ment supervisor could...

Feature Operation
To use Silent Monitor to listen to the conversation received by another extension:
1. Lift handset.
2. Press ICM.
Listen for: Dial tone
If you have an ESL set, skip this step, but dial # instead.
3. Dial # and the number of extension you want to monitor.
Listen for: Busy tone
4. Dial 6.
You can listen to the conversation coming into the extension you called.  You cannot hear that ex-
tension user talk.
To cancel Silent Monitor:
1. Hang up.
Features: Removing Trunks to Walking Class of...

SPECIAL SERVICES AND OCC COMPATIBILITY
Description
The system is compatible with special long distance services such as MCI or GTE Sprint.  The system adminis-
trator can use special services to save money on long distance calls.  An extension user can access these services
in two ways:
•Manually dial the special service access and security codes (refer to the Central Office Calls, Placing feature)
•Store the access and security codes in a Speed Dial bin
When using Extension Speed Dial, the user...

Related Features
Analog Station Interface (ASI) / Direct Inward System Access (DISA) / Off-Premise Extension
(OPX)
The system always allows Continued Dialing for ASI and OPX extensions and DISA callers.
Automatic Route Selection
ARS can have digit insertion/dialing translation capabilities.  This makes selecting special services for
outgoing calls transparent to extension users.
DP and DTMF Compatibility
After a special service answers, it requires DTMF signaling. Pulse to Tone Conversion lets a user...

SPEED DIAL
Description
Speed Dial gives an extension user quick access to frequently called numbers.  There are two types of Speed
Dial: Personal Speed Dial and System Speed Dial.  Personal Speed Dial numbers are available to individual ex-
tensions or shared by groups of extensions.  System Speed Dial numbers are available to every system user.
Systems with an AUX Module allow a maximum of 1140 bins in 57 Speed Dial blocks (20 bins in each block).
A system without an AUX Module has only 28 blocks...

Storing a Pause in a Speed Dial Bin
The system allows Pause commands in Speed Dial bins.  Each Pause command counts as a digit.  To store a
Pause from an extension, the user presses HOLD while programming bins.  While entering numbers from the
programming terminal, the system administrator enters P.  When the system sees a Pause, it waits a programma-
ble interval for a second dial tone.  If the system detects the second dial tone, it dials out the rest of the number.
If the system does not detect dial...

Programming
Required Programming
➣CP- Inhibit System Speed Dial (BY0:7)
Allow/deny extensions with this COS the ability to use System Speed Dial numbers.
[0=allow speed dial, 1=deny speed dial]
➣E- Extensions, E3- Extension Class of Service
Assign Class of Service to extensions. [00-27, 30 for operators]
➣E- Extensions, EB- Personal Speed Dial Block
Assign a Speed Dial block to an extension.  Extensions can share a block, thereby sharing the Extension
Speed Dial numbers. (see page 367)
➣QD- Number of...

[Y=suppress #, N=allow #]
➣SL- List Extension and System Speed Dial Numbers
List the programmed Speed Dial numbers and names.
➣SP- Programming Extension/System Speed Dial Numbers
Program Speed Dial numbers and names.
[enter trunk/trunk group # or I for intercom + telephone # + enter name (16 digits maximum)]
➣SR- Rotary Conversion (Converting Speed Dial Trunks)
Globally change the Speed Dial trunk assignments. [enter new trunk/trunk group #]
Related Features
Account Code Capability
If the system requires...

Line (Trunk) Queuing
If an extension user implements these features and hears busy tone, they can queue for a trunk.  The call
dials automatically when the user answers the Callback ring.
Line (Trunk) Rotaries (Hybrid Only)
Speed Dial bins can use trunk groups instead of specific trunks.
PBX/Centrex Compatibility
If a Speed Dial number uses a DP trunk and contains a pause, Pulse to Tone Conversion is automatic.
The digits before the pause dial out DP.  The digits after the pause dial out DTMF.  This may...

To call a System Speed Dial number (by dialing a code):
1. Lift handset.
You can preselect a trunk by pressing a line key.  If you preselect, you must press ICM instead of
DIAL before dialing a bin number
2. Press DIAL.
Listen for: Dial tone
If you have an ASI/OPX/ESL set, skip this step.
3. Dial System Speed Dial bin number (normally 700-799).
Listen for: Stored number dialing out
If Speed Dial number contains a Pause, you may have to press * to continue dialing.
If you hear busy tone, press an idle...