Nitsuko Digital System Feature And Terminal Programming Manual

- For Your Notes -
Features: Group Call Pickup - Release Key
RELEASE KEY
210   FEATURESN1870SWG04   Issue 1-0 

Features: Removing Trunks to Walking Class of ServiceREMOVING TRUNKS AND EXTENSIONS FROM SERVICE
Description
The attendant can remove problem trunks and extensions from service.  The trunk or extension must be idle.
This helps the attendant ensure maximum system performance.  For example, the attendant can busy-out a noisy
trunk or problem extension until service personnel can repair the problem.  The trunk or extension then appears
busy to all callers.  Following repair, the system administrator (from...

Feature Operation
To remove a problem trunk or extension from service (from your attendant’s extension):
1. Lift handset.
2. Press ICM.
Listen for: Dial tone
3. Press PGM#.
Listen for: Dial tone stops
4. Dial trunk or extension number.
Use the trunk extension numbers (e.g., 348), not the trunk number (e.g., 801).
5. Dial 0.
Listen for: Dial tone
To return a trunk or extension to service (from your attendant’s extension):
1. Lift handset.
2. Press ICM.
Listen for: Dial tone
3. Press PGM#.
Listen for: Dial...

RINGING LINE PREFERENCE
Description
Ringing Line Preference lets a keyset user answer a ringing call by just lifting the handset. For a user that pri-
marily answers calls, Ringing Line Preference ensures that ringing calls have priority.
Conditions 
If an extension has more than one call ringing its programmable keys, the system answers the call on the lowest
numbered key first.
Default Configuration
Ringing Line Preference disabled.
Programming
Required Programming
➣E- Extensions, E8- Line Access...

Intercom
If an extension has an Intercom and an outside call ringing, Ringing Line Preference answers the Inter-
com call.
Night Answer (Off-Hours Ringing)
Ringing Line Preference lets a keyset user answer a night mode call just by lifting the handset.
Prime Line Selection
Ringing Line Preference overrides Prime Line Selection,therefore, put the Prime Line on the lowest key..
Feature Operation
To answer a call using Ringing Line Preference (from your keyset):
Listen for: Trunk or ICM
1. Lift handset....

SAVE
Description
Save permits a keyset user to save their last outside number and easily redial it later on.  For example, an exten-
sion user can recall a busy or unanswered number without manually dialing the digits.  The system retains the
saved number until the user stores a new one in its place.
Save can retain a number up to 24 digits long.  The number can be any combination of digits 0-9, # or *.  Nor-
mally, the system uses the same trunk (or rotary) for Save as the user selected for the initial...

Feature Operation
To Save an outside number any time after placing a call:
1. Do not hang up.
2. Press DIAL.
3. Press SAVE.
To dial a Saved outside number:
To use a different trunk than the initial call, select a different trunk or rotary before going to step 1.
1. Lift handset.
2. Press DIAL.
Listen for: Dial tone
3. Press SAVE.
Listen for: Stored number dialing out
If you hear busy tone, press an idle line key.  Your call dials out automatically.
1
Features: Removing Trunks to Walking Class of Service...

SELECTABLE DISPLAY MESSAGES
Description
An extension user can select one of 16 preprogrammed Selectable Display Messages for their extension.  Dis-
play keyset callers see the selected message when they call the user’s extension.  Selectable Display Messages
provide personalized messaging.  For example, Fred Jones could select the message, On vacation.  Any dis-
play keyset user calling Fred would see the message and know why he doesn’t answer.  Other than displaying
the message, the system puts the call...

Related Features
Call Forwarding / Paging / Personal Greeting
Enabling Selectable Display Messages cancels a Call Forwarding or Personal Greeting in effect at an extension.
Call Forwarding Cancel
Call Forwarding Cancel will cancel DNDs, Personal Greetings and Selectable Display Messages system-
wide.
Microphone Mute
Turning off Microphone Mute (if enabled) automatically cancels Call Forwarding, Personal Greeting, Se-
lectable Display Messages.
Removing Trunks and Extensions from Service
Removing an...

To select a Display Message (by scrolling through the messages at a keyset):
1. Lift handset.
2. Press ICM.
Listen for: Dial tone
3. Press PGM#.
Listen for: Dial tone stops
4. Dial 6.
5. Scroll through the messages using VOL UP or VOL DN.
If you select a message from 00-07, you can add digits to the message.  The total message (includ-
ing the digits you add) cannot exceed 16 digits.
6. Press DIAL, SAVE.
If you append a message from 00-07, skip this step.
7. Hang up.
To cancel a Selectable Display...