Nitsuko Digital System Feature And Terminal Programming Manual

TELEMARKETING DIAL
Description
Available in Software Levels:
Base AUX 
N/A
> 02.10
Telemarketing Dial lets a keyset user have their PC dial outside calls. This is great for telemarketers that want to
use auto-dialing or database dialing for placing calls. To use Telemarketing Dial, the keyset user must have:
•Their PC connected to a modem, which is in turn connected to an ASI.
•A Call Coverage key for the ASI.
•Communications software installed in the PC
After the PC places the call, the supervisory...

TENANT SERVICE
Description
The system administrator can divide the system into individual tenant groups.  Typically, each tenant group has
their own attendant, outside lines and paging zones.  Tenant Service lets the system administrator use the same
system for several different businesses.  If an extension user dials 0, they reach their own operator.  In addition,
outside calls to and from one tenant don’t interfere with the other.  Finally, members of one tenant group hear
only their own Zone Paging,...

➣KS- Programming Keys for Keysets
Program the types of keys that allow the extension user to place trunk calls.
[9=switched loop, 9 and a line group # (0-8)=fixed loop, or enter a line #]
Assigning Internal Paging Zones to Tenants
➣CP- Inhibit Access to Page Zone 3 (BY2:4)
Allow/inhibit Paging to zone 3 for extensions with this COS.  You can allow this option for one tenant
group’s members and deny it for all others. [0=allow paging, 1=prevent paging]
➣CP- Inhibit Access to Page Zone 2 (BY2:3)...

Related Features
Automatic Route Selection
All extensions share the same ARS programming, regardless of tenant assignment.
Direct Inward Line (DIL)
You can have unanswered DILs recall to all tenant groups or only to the DIL’s extension tenant group.
Direct Inward System Access (DISA)
All tenants share the same DISA code.
Intercom
Members of one tenant group can place Intercom calls to members of another tenant group.
Night Answer (Off-Hours Ringing)
An attendant can place only its own trunks in night...

TIME AND DATE SETTING
Description
The system Time and Date appears on:
•Display Telephones
•Station Message Detail Recording reports
•System Reports, Diagnostics and Maintenance Utilities
•Traffic Management Report
A display keyset with Class of Service 00 and the system administrator can change the Time and Date.  Al-
though entered in 24-hour format, the system time always displays in 12-hour format (AM/PM).
Conditions 
None
Default Configuration
•Date=00/00/00
•Time=00:00:00
Programming
Required...

Feature Operation
To set the system time (if your display keyset has COS 00):
1. Lift handset.
2. Press ICM.
Listen for: Dial tone
3. Press PGM#.
Listen for: Dial tone stops
4. Dial 8.
5.
-Enter the hour (00-23).
Use a 24-hour clock (i.e., 1:00 PM = 13)
-Enter the minutes (00-59).
-Enter the seconds (00-59).
Listen for: Dial tone
6. Hang up.
To set the system date (if your display keyset has COS 00):
1. Lift handset.
2. Press ICM.
Listen for: Dial tone
3. Press PGM#.
Listen for: Dial tone stops
4. Dial...

TOLL RESTRICTION
Description
Toll Restriction limits the numbers an extension user may dial. By allowing extensions to place only certain
types of calls, the system administrator can control long distance costs.  The system applies Toll Restriction ac-
cording to an extension’s Class of Service Toll Restriction Level.  For each Toll Restriction Level, the adminis-
trator can enable or disable:
•Continuous dialing (see Special Services and OCC Compatibility)
•Special access (N11) dialing (such as 411...

➣AP- Allow NNX Dialing
Enable/disable local exchange (NNX) dialing for this Toll Level.  Also, program the NNX codes table.
 [Y=enable, N=disable]
➣AP- Allow NPA Dialing
Enable/disable area code (NPA) dialing for this Toll Level.  Also, program the NPA codes table.
 [Y=enable, N=disable]
➣AP- Six Digit Analysis
Enable/disable six-digit analysis for this Toll Level.  Also, program a six-digit analysis table.
 [Y=enable, N=disable]
➣CP- Allow Only Intercom Calls at Night (BY0:2)
At night, extensions with...

Related Features
Automatic Route Selection
A system can have ARS Toll Restriction.  When a user dials 9 or 90 for ARS, ARS overrides Toll Restric-
tion.
Call Waiting (Camp-On)
Trunk Camp-On bypasses Toll Restriction.
Central Office Calls, Placing
Toll Restriction may restrict the numbers a user may dial.
Dialing Number Preview
The system places normal routing and restriction on calls placed using Dialing Number Preview.
Direct Inward System Access (DISA)
If a DISA caller places an outgoing call, the...

Speed Dial
The Extension Speed Dial numbers an extension user stores are Toll Restricted.  The Extension Speed Dial
numbers entered at the programming terminal are not.  System Speed Dial numbers are not Toll Restricted.
Tenant Service
An extension in a tenant group can have night mode restriction (e.g., CP- Allow Only Intercom Calls at
Night [BY0:2] is 1). The restriction takes effect when the extension’s operator activates Night Answer.
Voice Prompting Messages
Available in Software Levels:
Base AUX...