Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Configure the IPv6 LAN Settings 
170 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type 
your password.
For the default administrative account, the default user...

Configure the IPv6 LAN Settings 
171  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
3. In the Username field, type your user name and in the Password / Passcode field, type 
your password.
For the default administrative account, the default user name is admin and the default 
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu 
selection at...

Configure the IPv6 LAN Settings 
172 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
IPv6 Router Advertisement Daemon for the LAN
The RADVD is an application that uses the Neighbor Discovery Protocol (NDP) to collect 
link-local advertisements of IPv6 addresses and IPv6 prefixes in the LAN. The RADVD then 
distributes this information in the LAN, which allows IPv6 clients to configure their own IPv6 
address. 
Hosts and routers in the LAN use NDP to determine the link-layer addresses and related...

Configure the IPv6 LAN Settings 
173  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type 
your password.
For the default administrative account, the default user name is admin and the default 
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the domain or...

Configure the IPv6 LAN Settings 
174 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
9. Enter the settings as described in the following table.
SettingDescription
RADVD Status From the RADVD Status menu, select Enable. The RADVD is enabled, and the 
RADVD fields are available.
The default selection is Disable. The RADVD is disabled, and the RADVD fields are 
masked out.
Advertise Mode Select the advertisement mode:
• Unsolicited Multicast. The VPN firewall advertises unsolicited multicast...

Configure the IPv6 LAN Settings 
175  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
10. Click the Apply button.
Your settings are saved.
View Automatically Added Advertisement Prefixes for the LAN and Manually 
Add Advertisement Prefixes
If you enabled the ISP DHCPv6 server to assign a prefix through prefix delegation to the VPN 
firewall (see 
Use a DHCPv6 Server to Configure an IPv6 Internet Connection Automatically 
on page 90), you do not need to add advertisement prefixes but have the...

Configure the IPv6 LAN Settings 
176 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > LAN Settings.
The LAN Setup screen displays the IPv4 settings.
7. In the upper right, select the IPv6 radio button. 
The LAN Setup screen displays the IPv6 settings. The following figure shows some 
examples.
8....

Configure the IPv6 LAN Settings 
177  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
If you enabled the ISP DHCPv6 server to assign a prefix through prefix delegation to the 
VPN firewall (see 
Use a DHCPv6 Server to Configure an IPv6 Internet Connection 
Automatically on page 90), the advertisement prefixes that are based on the ISPs 
assignment are shown in the List of Prefixes to Advertise table. Advertisement prefixes 
that you add manually also show in the table.
9. Under the List of...

Configure the IPv6 LAN Settings 
178 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
10. Enter the settings as described in the following table.
11. Click the Apply button.
Your settings are saved. The new advertisement prefix is added to the List of Prefixes to 
Advertise table on the RADVD screen for the LAN.
Change an Advertisement Prefix for the LAN
The following procedure describes how to change an existing advertisement prefix for the 
LAN.
To change an advertisement prefix for the LAN:...

Configure the IPv6 LAN Settings 
179  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > LAN Settings.
The LAN Setup screen displays the IPv4 settings. 
7. In the upper right, select the IPv6 radio button. 
The LAN Setup screen displays the IPv6 settings.
8. Click the RADVD option arrow in the upper...