Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Configure the IPv6 LAN Settings 
190 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
For the default administrative account, the default user name is admin and the default 
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration...

Configure the IPv6 LAN Settings 
191  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
9. Enter the settings as described in the following table.
SettingDescription
RADVD Status From the RADVD Status menu, select Enable. The RADVD is enabled and the 
RADVD fields are available.
The default selection is Disable. The RADVD is disabled and the RADVD fields are 
masked out.
Advertise Mode Select the advertisement mode:
• Unsolicited Multicast. The VPN firewall advertises unsolicited multicast packets...

Configure the IPv6 LAN Settings 
192 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
10. Click the Apply button.
Your settings are saved.
Add an Advertisement Prefix for the DMZ
You must configure the prefixes that are advertised in the DMZ router advertisements (RAs). 
For a 6to4 address, you must specify only the site level aggregation identifier (SLA ID) and 
the prefix lifetime. For a global, local, or ISATAP address, you must specify the prefix, prefix 
length, and prefix lifetime.
To add...

Configure the IPv6 LAN Settings 
193  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
7. In the upper right, select the IPv6 radio button. 
The DMZ Setup screen displays the IPv6 settings. The following figure shows an 
example.
8. Click the RADVD option arrow in the upper right. 
The RADVD screen for the DMZ displays. The following figure shows some examples. 

Configure the IPv6 LAN Settings 
194 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
9. Under the List of Prefixes to Advertise table, click the Add button.
The Add Advertisement Prefix screen displays. 

Configure the IPv6 LAN Settings 
195  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
10. Enter the settings as described in the following table.
11. Click the Apply button.
Your settings are saved. The new IPv6 address pool is added to the List of Prefixes to 
Advertise table on the RADVD screen for the DMZ.
Change an Advertisement Prefix for the DMZ
The following procedure describes how to change an existing advertisement prefix for the 
DMZ.
To change an advertisement prefix for the DMZ:
1....

Configure the IPv6 LAN Settings 
196 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > DMZ Setup.
The DMZ Setup screen displays the IPv4 settings.
7. In the upper right, select the IPv6 radio button. 
The DMZ Setup screen displays the IPv6 settings. 
8. Click the RADVD option arrow in the upper...

Configure the IPv6 LAN Settings 
197  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > DMZ Setup.
The DMZ Setup screen displays the IPv4 settings.
7. In the upper right, select the IPv6 radio button. 
The DMZ Setup screen displays the IPv6 settings. 
8. Click the RADVD option arrow in the upper...

Configure the IPv6 LAN Settings 
198 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Configure a Stateful DHCPv6 Server for the DMZ
The following procedure describes how to configure a stateful DHCPv6 server and 
corresponding IPv6 settings for the DMZ.
To configure a stateful DHCPv6 server and corresponding IPv6 settings for the DMZ:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the...

Configure the IPv6 LAN Settings 
199  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. Enter the settings as described in the following table. 
SettingDescription
DMZ Port Setup
Select the Ye s radio button to configure the DMZ port settings. Complete the following fields:
• IPv6 Address. Enter the IP address of the DMZ port. Make sure that the DMZ port IP address, LAN 
port IP address, and WAN port IP address are in different subnets. The default IP address for the 
DMZ port is fdff::1. 
•...