Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Configure the IPv4 LAN Settings 
140 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
8. Select the radio button next to the group name that you want to change.
Note:You can change only one group name at a time.
9. Type a new name in the field. 
The maximum number of characters is 15. Do not use a double quote (), single quote (), 
or space in the name.
10. Click the Apply button.
Your settings are saved.
Manage the DMZ Port for IPv4 Traffic
The following sections provide information about...

Configure the IPv4 LAN Settings 
141  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
applications and to work correctly with them, but other applications might not function well. In 
some cases, local computers can run the application correctly if those computers are used 
on the DMZ port.
Note the following about the DMZ port:
•The VPN firewall has a separate firewall security profile for the DMZ port. This security 
profile is also physically independent of the standard firewall security...

Configure the IPv4 LAN Settings 
142 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
7. Enter the settings as described in the following table.
SettingDescription
DMZ Port Setup
Select the Ye s radio button to configure the DMZ port settings. Complete the following fields:
• IP Address. Enter the IP address of the DMZ port. Make sure that the DMZ port IP address and LAN 
port IP address are in different subnets (for example, an address outside the LAN DHCP address pool, 
such as 192.168.1.101...

Configure the IPv4 LAN Settings 
143  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
DHCP for DMZ Connected Computers
Select one of the following radio buttons:
• Disable DHCP Server. If another device in the DMZ functions as the Dynamic Host Configuration 
Protocol (DHCP) server for the DMZ, or if you intend to manually configure the network settings of all 
computers in the DMZ, select the Disable DHCP Server radio button to disable the DHCP server. This 
is the default setting.
• Enable DHCP...

Configure the IPv4 LAN Settings 
144 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
8. Click the Apply button.
Your settings are saved.
Manage Static IPv4 Routing
The following sections provide information about managing static IPv4 routing:
•Static IPv4 Routes
•Add a Static IPv4 Route
•Change a Static IPv4 Route
•Remove One or More Static IPv4 Routes
•Configure the Routing Information Protocol
•IPv4 Static Route Example
Static IPv4 Routes
Static routes provide routing information to your VPN...

Configure the IPv4 LAN Settings 
145  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
and you do not need to configure additional static routes. Configure static routes only for 
unusual cases such as multiple firewalls or multiple IP subnets on your network.
The VPN firewall automatically sets up routes between VLANs and secondary IPv4 
addresses that you have configured (see 
Manage IPv4 Multihome LAN IP Addresses on the 
Default VLAN on page 128). Therefore, you do not need to manually add an...

Configure the IPv4 LAN Settings 
146 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
8. Enter the settings as described in the following table. 
9. Click the Apply button.
Your settings are saved. The new static route is added to the Static Routes table.
SettingDescription
Route Name The route name for the static route (for purposes of identification and 
management).
Active To make the static route effective, select the Active check box.
Note:You can add a route to the table and make the route...

Configure the IPv4 LAN Settings 
147  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Change a Static IPv4 Route
The following procedure describes how to change an existing IPv4 static route.
To change an IPv4 static route:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager...

Configure the IPv4 LAN Settings 
148 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type 
your password.
For the default administrative account, the default user name is admin and the default 
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain...

Configure the IPv4 LAN Settings 
149  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > Routing. 
The Static Routing screen displays the IPv4 settings. The following figure shows one 
example.
7. Click the RIP Configuration option arrow in the upper right.
The RIP Configuration screen displays. The...