Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Configure the IPv4 LAN Settings 
120 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Note:For information about how to manage VLANs, see Port-Based VLANs 
on page 11 6.
The following sections provide information about managing VLAN profiles:
•Add a VLAN Profile
•Change a VLAN Profile
•Enable, Disable, or Delete Existing VLAN Profiles
Add a VLAN Profile
The following procedure describes how to add a VLAN profile with an IP address, associate 
ports with the VLAN profile, and configure optional...

Configure the IPv4 LAN Settings 
121  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
7. Click the Add button. 
The Add VLAN Profile screen displays. 

Configure the IPv4 LAN Settings 
122 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
8. Enter the settings as described in the following table.
SettingDescription
VLAN Profile
Profile Name Enter a unique name for the VLAN profile.
VLAN ID Enter a unique ID number for the VLAN profile. No two VLANs can have the same 
VLAN ID number.
Note:You can enter VLAN IDs from 2 to 4089. VLAN ID 1 is reserved for the 
default VLAN; VLAN ID 4094 is reserved for the DMZ interface.
Port Membership
Port 1, Port...

Configure the IPv4 LAN Settings 
123  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Domain Name This setting is optional. Enter the domain name of the VPN firewall.
Start IP Address Enter the start IP address. This address specifies the first of the contiguous 
addresses in the IP address pool. Any new DHCP client joining the LAN is 
assigned an IP address between this address and the end IP address. For the 
default VLAN, the default start IP address is 192.168.1.100. 
End IP Address Enter the...

Configure the IPv4 LAN Settings 
124 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
9. Click the Apply button.
Your settings are saved.
Change a VLAN Profile
The following procedure describes how to change an existing VLAN profile.
To change a VLAN profile:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP address is...

Configure the IPv4 LAN Settings 
125  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
9. Click the Apply button.
Your settings are saved. The modified VLAN profile displays in the VLAN Profiles table 
on the LAN Setup screen.
Enable, Disable, or Delete Existing VLAN Profiles
The following procedure describes how to enable or disable existing VLAN profiles or remove 
VLAN profiles that you no longer need.
To enable, disable, or remove one or more VLAN profiles:
1. On your computer, launch an...

Configure the IPv4 LAN Settings 
126 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
The ! status icons change from green circles to gray circles, indicating that the 
selected profiles are disabled.
•Delete. Removes the selected VLAN profiles.
The selected profiles are removed from the VLAN Profiles table.
Configure Unique VLAN MAC Addresses 
By default, all configured VLAN profiles share the same single MAC address as the LAN 
ports. (All LAN ports share the same MAC address.) However, you can...

Configure the IPv4 LAN Settings 
127  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. From the MAC Address for VLANs menu, select Unique.
The default setting is Same.
9. Click the Apply button.
Your settings are saved. VLANs have unique MAC addresses.
Note:If you attempt to configure more than 16 VLANs, the MAC addresses 
that are assigned to each VLAN might no longer be distinct.
Disable the Broadcast of ARP Packets for the Default VLAN
You can disable the broadcast of Address Resolution...

Configure the IPv4 LAN Settings 
128 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > LAN Settings.
The LAN submenu tabs display, with the LAN Setup screen in view, displaying the IPv4 
settings.
7. Click the Advanced option arrow in the upper right.
The IPv4 LAN Advanced screen displays.
8. Clear...

Configure the IPv4 LAN Settings 
129  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
access to the Internet, but you can do so only for the default VLAN. The IP address that is 
assigned as a secondary IP address must be unique and cannot be assigned to a VLAN.
Make sure that any secondary LAN addresses are different from the primary LAN, WAN, and 
DMZ IP addresses and subnet addresses that are already configured on the VPN firewall. 
The following is an example of correctly configured IPv4...