Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Configure the IPv4 Internet and WAN Settings 
81  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type 
your password.
For the default administrative account, the default user name is admin and the default 
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the...

Configure the IPv4 Internet and WAN Settings 
82 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
•QoS Type. The type of profile, either Rate Control or Priority.
•Interface Name. The WAN interface to which the profile applies (WAN1 or WAN2).
•Service. The service to which the profile applies.
•Direction. The WAN direction to which the profile applies (inbound, outbound, or 
both).
•Rate. The bandwidth rate in Kbps or the priority.
•Hosts. The IP address, IP addresses, or group to which the rate...

Configure the IPv4 Internet and WAN Settings 
83  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. Change the settings.
For information about the settings, see Add a Rate Control WAN QoS Profile on page 75 
and Add a Priority Queue WAN QoS Profile on page 78.
9. Click the Apply button.
Your settings are saved. The modified QoS profile displays in the List of QoS Profiles table 
on the QoS screen.
Enable, Disable, or Remove One or More WAN QoS Profiles
The following procedure describes how to...

Configure the IPv4 Internet and WAN Settings 
84 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
The ! status icons change from green circles to gray circles, indicating that the 
selected profiles are disabled.
•Delete. Removes the selected WAN QoS profiles.
The selected profiles are removed from the List of QoS Profiles table.
Additional WAN-Related Configuration Tasks
If you want the ability to manage the VPN firewall remotely, enable remote management (see 
Set Up Remote Management Access on...

85
3
3.   Configure the IPv6 Internet and 
WAN Settings
This chapter explains how to configure the IPv6 Internet and WAN settings. The chapter 
contains the following sections:
•Roadmap to Setting Up an IPv6 Internet Connection to Your ISP
•Configure the IPv6 Internet Connection and WAN Settings
•Manage Tunneling for IPv6 Traffic
•Configure Stateless IP/ICMP Translation
•Configure Auto-Rollover for IPv6 Interfaces
•Additional WAN-Related Configuration Tasks
•What to Do Next 

Configure the IPv6 Internet and WAN Settings 
86 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Roadmap to Setting Up an IPv6 Internet Connection to Your ISP
Typically, the VPN firewall is installed as a network gateway to function as a combined LAN 
switch and firewall to protect the network from incoming threats and provide secure 
connections. To complement the firewall protection, NETGEAR recommends that you use a 
gateway security appliance such as a NETGEAR ProSECURE STM appliance.
The...

Configure the IPv6 Internet and WAN Settings 
87  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
5. (Optional) Configure auto-rollover and failure detection. By default, the WAN interfaces 
are configured for primary (single) WAN mode. You can enable auto-rollover and configure 
the failure detection settings.
These tasks are described in Configure Auto-Rollover for IPv6 Interfaces on page 109. 
6. (Optional) Configure advanced WAN options. If necessary, change the factory default 
MTU size,...

Configure the IPv6 Internet and WAN Settings 
88 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
After you configured the IPv6 routing mode, you must configure a WAN interface with a 
global unicast address to enable secure IPv6 Internet connections on your VPN firewall. A 
global unicast address is a public and routable IPv6 WAN address that can be statically or 
dynamically assigned. The web management interface offers two connection configuration 
options:
•Automatic configuration of the...

Configure the IPv6 Internet and WAN Settings 
89  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Enable the IPv6 Routing Mode
The following procedure describes how to enable the IPv6 routing mode.
To enable the IPv6 routing mode:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration...

Configure the IPv6 Internet and WAN Settings 
90 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
WARNING:
Changing the IP routing mode causes the VPN firewall to reboot.
8. Click the Apply button.
Your settings are saved.
Use a DHCPv6 Server to Configure an IPv6 Internet 
Connection Automatically
A DHCPv6 server can allow the VPN firewall to autoconfigure its IPv6 Internet settings. The 
following sections provide information about using a DHCPv6 sever to configure an IPv6 
Internet connection...