Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Configure the IPv4 Internet and WAN Settings 
41  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
9. Enter the login name in the Login field and the password in the Password field. 
This information is provided by your ISP and is specific for the PPPoE service.
10. In the ISP Type section, select the Other (PPPoE) radio button.
11. Enter the PPPoE settings as described in the following table.
12. Locate the Internet (IP) Address section.
SettingDescription
Account Name The valid account name for...

Configure the IPv4 Internet and WAN Settings 
42 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
13. Configure the IP address settings as described in the following table.
14. Locate the Domain Name Server (DNS) Servers section.
15. Specify the DNS settings as described in the following table. 
16. Locate the Connection Reset section.
SettingDescription
Select an IP address radio button:
• Get Dynamically from ISP. Select this radio button if your ISP has not assigned you a static IP 
address....

Configure the IPv4 Internet and WAN Settings 
43  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
17. To configure an automatic connection reset, specify the settings as described in the 
following table.
18. Click the Apply button.
Your settings are saved.
19. To evaluate your entries, click the Test button. 
The VPN firewall attempts to make a connection according to the settings that you 
entered.
20. Verify the connection:
a.Select Network Configuration > WAN Settings > WAN Setup.
The WAN...

Configure the IPv4 Internet and WAN Settings 
44 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Manually Configure a PPTP IPv4 Internet Connection
To configure a PPTP IPv4 Internet connection, enter the PPTP IPv4 information that your 
IPv4 ISP gave you. If you do not have this information, contact your IPv4 ISP. 
For each WAN interface, you need the following information: login name, login password, the 
IP address assigned by the ISP to make the connection with the ISP server, the IP address...

Configure the IPv4 Internet and WAN Settings 
45  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
7. In the WAN IPv4 Settings table, click the Edit button for the WAN interface that you want 
to configure.
The WAN IPv4 ISP Settings screen displays.
8. In the ISP Login section, select the Ye s radio button.
9. Enter the login name in the Login field and the password in the Password field. 
This information is provided by your ISP and is specific for the PPTP service.
10. In the ISP Type section,...

Configure the IPv4 Internet and WAN Settings 
46 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
12. Locate the Internet (IP) Address section.
13. Configure the IP address settings as described in the following table.
14. Locate the Domain Name Server (DNS) Servers section.
Idle Timeout Select a connection method radio button:
• Keep Connected. Select this radio button to keep the connection always on. 
• Idle Timeout. Select this radio button to log out after the connection is idle for a...

Configure the IPv4 Internet and WAN Settings 
47  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
15. Specify the DNS settings as described in the following table. 
16. Locate the Connection Reset section.
17. To configure an automatic connection reset, specify the settings as described in the 
following table.
18. Click the Apply button.
Your settings are saved.
19. To evaluate your entries, click the Test button. 
The VPN firewall attempts to make a connection according to the settings that you...

Configure the IPv4 Internet and WAN Settings 
48 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
The Connection Status pop-up screen displays. The IP addresses that are shown in 
this figure are not related to any other examples in this manual.
The Connection Status screen shows a valid IP address and gateway. You are 
connected to the Internet.
Note:If the configuration was not successful, see Troubleshoot the ISP 
Connection on page 615.
Configure Load Balancing or Auto-Rollover for IPv4...

Configure the IPv4 Internet and WAN Settings 
49  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
firewall supports weighted load balancing and round-robin load balancing (see Configure 
Load Balancing Mode and Optional Protocol Binding for IPv4 Interfaces on page 49).
Note:Scenarios could arise in which load balancing must be bypassed for 
certain traffic or applications. If certain traffic must travel on a specific 
WAN interface, configure protocol binding rules for that WAN 
interface. The...

Configure the IPv4 Internet and WAN Settings 
50 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Protocol Binding
When a protocol is bound to a particular WAN port, all outgoing traffic of that protocol is 
directed to the bound WAN port. For example, if the HTTPS protocol is bound to the WAN1 
port and the FTP protocol is bound to the WAN2 port, the VPN firewall automatically routes 
all outbound HTTPS traffic from the computers on the LAN through the WAN1 port. All 
outbound FTP traffic is...