Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Configure the IPv6 Internet and WAN Settings 
111  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type 
your password.
For the default administrative account, the...

Configure the IPv6 Internet and WAN Settings 
112 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
The other WAN interface becomes disabled.
c. Select the Auto Rollover check box.
d. From the corresponding menu on the right, select a WAN interface to function as the 
backup WAN interface.
Note:Ensure that the backup WAN interface is configured before enabling 
auto-rollover mode.
8. Click the Apply button.
Your settings are saved.
Configure the Failure Detection Method for IPv6 WAN 
Interfaces...

Configure the IPv6 Internet and WAN Settings 
113  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. In the IPv6 WAN Settings table, click the Edit button for the WAN interface that you 
selected as the primary WAN interface.
The WAN IPv6 ISP Settings screen displays.
9. Click the Advanced option arrow in the upper right. 
The WAN IPv6 Advanced Settings screen displays for the WAN interface that you 
selected.
10. Enter the settings as described in the following table.
Note:The default time to...

Configure the IPv6 Internet and WAN Settings 
114 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Note:You can configure the VPN firewall to generate a WAN status log and 
email this log to a specified address (see 
Manage Logging, Alerts, 
and Event Notifications on page 567). 
Additional WAN-Related Configuration Tasks
If you want the ability to manage the VPN firewall remotely, enable remote management (see 
Set Up Remote Management Access on page 534). If you enable remote management,...

114
4
4.   Configure the IPv4 LAN Settings
This chapter describes how to configure the IPv4 LAN features of your VPN firewall. The chapter 
contains the following sections:
•Manage IPv4 Virtual LANs and DHCP Options
•Manage IPv4 Multihome LAN IP Addresses on the Default VLAN
•Manage IPv4 LAN Groups and Hosts
•Manage the DMZ Port for IPv4 Traffic
•Manage Static IPv4 Routing 

Configure the IPv4 LAN Settings 
115  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Manage IPv4 Virtual LANs and DHCP Options
The following sections provide information about managing IPv4 VLANs and DHCP options:
•IPv4 LANs and VLANs
•Port-Based VLANs
•Assign VLAN Profiles
•VLAN DHCP
•Manage VLAN Profiles
•Configure Unique VLAN MAC Addresses
•Disable the Broadcast of ARP Packets for the Default VLAN
IPv4 LANs and VLANs
A local area network (LAN) can generally be defined as a broadcast domain....

Configure the IPv4 LAN Settings 
116 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Port-Based VLANs
The VPN firewall supports port-based VLANs. Port-based VLANs confine broadcast traffic to 
the LAN ports. 
Even though a LAN port can be a member of more than one VLAN, the port can have only 
one VLAN ID as its port VLAN identifier (PVID). By default, all four LAN ports of the VPN 
firewall are assigned to the default VLAN, or VLAN 1. Therefore, by default, all four LAN ports 
have the default...

Configure the IPv4 LAN Settings 
117  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
To assign VLAN profiles to LAN ports:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode...

Configure the IPv4 LAN Settings 
118 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
•VLAN ID. The unique ID (or tag) assigned to the VLAN profile.
•Subnet IP. The subnet IP address for the VLAN profile.
•DHCP Status. The DHCP server status for the VLAN profile, which can be either 
Enabled or Disabled.
•Action. The Edit button, which provides access to the Edit VLAN Profile screen.
7. In the Default VLAN section, assign a VLAN profile to a LAN port by selecting a VLAN profile 
from a port...

Configure the IPv4 LAN Settings 
119  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
For most applications, the default DHCP server and TCP/IP settings of the VPN firewall are 
satisfactory. 
The VPN firewall delivers the following settings to any LAN device that requests DHCP:
•An IP address from the range that you define
•Subnet mask
•Gateway IP address (the VPN firewall’s LAN IP address)
•Primary DNS server (the VPN firewall’s LAN IP address)
•WINS server (if you configure a WINS server for...