Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Configure the IPv4 LAN Settings 
150 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
8. Enter the settings as described in the following table. 
9. Click the Apply button.
SettingDescription
RIP
RIP Direction From the RIP Direction menu, select the direction in which the VPN firewall sends and 
receives RIP packets:
• None. The VPN firewall neither advertises its route table nor accepts any RIP 
packets from other routers. This effectively disables RIP and is the default setting.
• In Only. The...

Configure the IPv4 LAN Settings 
151  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Your settings are saved.
IPv4 Static Route Example
In this example, we assume the following:
•The VPN firewall’s primary Internet access is through a cable modem to an ISP.
•The VPN firewall is on a local LAN with IP address 192.168.1.100.
•The VPN firewall connects to a remote network where you must access a device. 
•The LAN IP address of the remote network is 134.177.0.0.
When you first configured the VPN...

152
5
5.   Configure the IPv6 LAN Settings
This chapter describes how to configure the IPv6 LAN features of your VPN firewall. The chapter 
contains the following sections:
•Manage the IPv6 LAN
•Manage IPv6 Multihome LAN IP Addresses
•Manage the DMZ Port for IPv6 Traffic
•Manage Static IPv6 Routing 

Configure the IPv6 LAN Settings 
153  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Manage the IPv6 LAN
The following sections provide information about managing the IPv6 LAN:
•IPv6 LANs
•DHCPv6 LAN Server Concepts and Configuration Roadmap
•Configure a Stateless DHCPv6 Server Without Prefix Delegation for the LAN
•Manage a Stateless DHCPv6 Server with Prefix Delegation for the LAN 
•Manage a Stateful DHCPv6 Server and IPv6 Address Pools for the LAN 
•Manage the IPv6 Router Advertisement Daemon...

Configure the IPv6 LAN Settings 
154 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
The VPN firewall provides three DHCPv6 options for the LAN. The following sections provide 
information about the DHCPv6 options for the LAN:
•Concept: Stateless DHCPv6 Server Without Prefix Delegation for the LAN
•Concept: Stateless DHCPv6 Server With Prefix Delegation for the LAN
•Concept: Stateful DHCPv6 Server for the LAN
Concept: Stateless DHCPv6 Server Without Prefix Delegation for the LAN
The IPv6 clients...

Configure the IPv6 LAN Settings 
155  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
For stateless DHCPv6 with prefix delegation, you must enable and configure the RADVD, but 
you do not need to add advertisement prefixes to the RADVD because the DHCPv6 server 
assigns the prefixes that you specify for the DHCPv6 server.
To set up a stateless DHCPv6 server with prefix delegation in the LAN, complete these 
tasks:
1. Configure the stateless DHCP server with prefix delegation (see Manage a...

Configure the IPv6 LAN Settings 
156 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type 
your password.
For the default administrative account, the default user...

Configure the IPv6 LAN Settings 
157  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. Enter the settings as described in the following table. 
SettingDescription
IPv6 LAN Setup
IPv6 Address Enter the LAN IPv6 address. The default address is fc00::1. (For more information, 
see IPv6 LANs on page
 153.)
IPv6 Prefix Length Enter the IPv6 prefix length, for example, 10 or 64. The default prefix length is 64.
DHCPv6
DHCP Status Enable the DHCPv6 server by selecting Enable DHCPv6 Server from the...

Configure the IPv6 LAN Settings 
158 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
9. Click the Apply button.
Your settings are saved.
Manage a Stateless DHCPv6 Server with Prefix Delegation for 
the LAN
The following sections provide information about managing a stateless DHCPv6 server with 
prefix delegation for the LAN:
•Stateless DHCPv6 Server and Prefix Delegation for the LAN
•Configure a Stateless DHCPv6 Server with Prefix Delegation
•Manually Add IPv6 LAN Prefixes for Prefix Delegation...

Configure the IPv6 LAN Settings 
159  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Stateless DHCPv6 Server and Prefix Delegation for the LAN
As an option for a stateless DHCPv6 server, you can enable prefix delegation. Note that this 
is prefix delegation by the DHCPv6 server in the LAN, not by the ISP DHCPv6 sever in the 
WAN. After you specify a prefix and a prefix length for the DHCPv6 server, the VPN firewall’s 
stateless DHCPv6 server assigns prefixes to its IPv6 LAN clients through the...