Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Configure the IPv6 LAN Settings 
200 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
9. Click the Apply button.
Your settings are saved.
Add an IPv6 DMZ Address Pool
If you use a stateful DHCPv6 server for the DMZ, you must add local DHCP IPv6 address 
pools so that the DHCPv6 server can control the allocation of IPv6 addresses in the DMZ.
To add an IPv6 DMZ address pool:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was...

Configure the IPv6 LAN Settings 
201  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > DMZ Setup.
The DMZ Setup screen displays the IPv4 settings.
7. In the upper right, select the IPv6 radio...

Configure the IPv6 LAN Settings 
202 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
9. Enter the settings as described in the following table.
10. Click the Apply button.
Your settings are saved. The new IPv6 address pool is added to the List of IPv6 Address 
Pools table on the DMZ Setup (IPv6) screen.
Change an IPv6 DMZ Address Pool
The following procedure describes how to change an existing IPv6 DMZ address pool.
To change an IPv6 DMZ address pool:
1. On your computer, launch an Internet...

Configure the IPv6 LAN Settings 
203  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > DMZ Setup.
The DMZ Setup screen displays the IPv4 settings.
7. In the upper right, select the IPv6 radio button. 
The DMZ Setup screen displays the IPv6 settings. 
8. In List of IPv6 Address Pools table, click the Edit button for the address pool that you want 
to change.
The DMZ IPv6 Config screen displays.
9. Change...

Configure the IPv6 LAN Settings 
204 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
7. In the upper right, select the IPv6 radio button. 
The DMZ Setup screen displays the IPv6 settings. 
8. In List of IPv6 Address Pools table, select the check box to the left of each address pool 
that you want to remove or click the Select All button to select all address pools.
9. Click the Delete button.
The selected IPv6 address pools are removed from the List of IPv6 Address Pools table.
Manage Static...

Configure the IPv6 LAN Settings 
205  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > Routing.
The Static Routing screen displays the IPv4 settings.
7. In the upper right, select the IPv6 radio button. 
The Static Routing screen displays the IPv6 settings. The following figure contains an 
example.
8. Click the Add button under the Static Routes table.
The IPv6 Static Routing screen displays.
9. Enter...

Configure the IPv6 LAN Settings 
206 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
10. Click the Apply button.
Your settings are saved. The new static route is added to the List of IPv6 Static Routes 
table on the Static Routing screen for IPv6.
Change a Static IPv6 Route
The following procedure describes how to change an existing IPv6 static route.
To change an IPv6 static route:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address...

Configure the IPv6 LAN Settings 
207  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
The Edit IPv6 Static Routing screen displays.
9. Change the settings.
For information about the settings, see Add a Static IPv6 Route on page 204.
10. Click the Apply button.
Your settings are saved. The modified route displays in the List of IPv6 Static Routes table 
on the Static Routes screen.
Remove One or More Static IPv6 Routes
The following procedure describes how to remove one or more existing IPv6...

208
6
6.   Customize Firewall Protection
This chapter describes how to use the firewall features of the VPN firewall to protect your 
network. The chapter contains the following sections:
•Firewall Protection
•Overview of Rules to Block or Allow Specific Kinds of Traffic
•Change the Default Outbound Policy for LAN WAN Traffic
•Add LAN WAN Rules
•Add DMZ WAN Rules
•Add LAN DMZ Rules
•Manage Existing Firewall Rules
•Examples of Firewall Rules
•Configure Other Firewall Features
•Manage Firewall Objects 

Customize Firewall Protection 
209  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Firewall Protection 
A firewall protects one network (the trusted network, such as your LAN) from another (the 
untrusted network, such as the Internet) while allowing communication between the two. You 
can further segment keyword blocking to certain known groups such as LAN groups and IP 
groups.
For IPv4, a firewall incorporates the functions of a Network Address Translation (NAT) router, 
protects the trusted...