Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Configure the IPv6 LAN Settings 
160 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
b. In the upper right, select the IPv6 radio button.
The WAN Setup screen displays the IPv6 settings.
c. In the WAN IPv6 Settings table, click the Edit button for the WAN interface for which 
you want to check the WAN configuration.
The WAN IPv6 ISP Settings screen displays. The following figure shows the WAN2 
IPv6 ISP Settings screen as an example.
d. In the Internet Address section, make sure that the...

Configure the IPv6 LAN Settings 
161  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
f. Make sure that the Prefix Delegation check box is selected.
g. If you made any changes, click the Apply button.
Your settings are saved.
7. Select Network Configuration > LAN Settings.
The LAN Setup screen displays the IPv4 settings.
8. In the upper right, select the IPv6 radio button. 
The LAN Setup screen displays the IPv6 settings. The following figure shows some 
examples.
9. Enter the settings as...

Configure the IPv6 LAN Settings 
162 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
10. Click the Apply button.
Your settings are saved.
DHCPv6
DHCP Status Enable the DHCPv6 server by selecting Enable DHCPv6 Server from the DHCP 
Status menu.
The default menu selection is Disable DHCPv6 Server. 
DHCP Mode From the DHCP Mode menu, select Stateless. 
The IPv6 clients generate their own IP address by using a combination of locally 
available information and router advertisements but receive DNS...

Configure the IPv6 LAN Settings 
163  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Manually Add IPv6 LAN Prefixes for Prefix Delegation
As an option, you can also manually add prefixes to enable the DHCPv6 server to assign 
these prefixes to its IPv6 LAN clients.
To add an IPv6 prefix manually for prefix delegation:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation...

Configure the IPv6 LAN Settings 
164 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
10. Click the Apply button.
Your settings are saved. The new prefix is added to the List of Prefixes for Prefix 
Delegation table on the LAN Setup screen for IPv6.
Change an IPv6 LAN Prefix for Prefix Delegation
The following procedure describes how to change an existing IPv6 LAN prefix for prefix 
delegation.
To change a prefix for prefix delegation:
1. On your computer, launch an Internet browser.
2. In the...

Configure the IPv6 LAN Settings 
165  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Remove One or More IPv6 LAN Prefixes for Prefix Delegation
The following procedure describes how to remove one or more prefixes that you no longer 
need for prefix delegation.
To remove one or more prefixes for prefix delegation:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process....

Configure the IPv6 LAN Settings 
166 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
•Remove One or More IPv6 LAN Address Pools
Stateful DHCPv6 Server and IPv6 Address Pool for the LAN
With a stateful DHCPv6 server, the IPv6 clients in the LAN obtain an interface IP address, 
configuration information such as DNS server information, and other parameters from the 
DHCPv6 server. The IP address is a dynamic address.
For stateful DHCPv6, you also must configure IPv6 address pools (see Add an IPv6...

Configure the IPv6 LAN Settings 
167  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. Enter the settings as described in the following table. 
SettingDescription
IPv6 LAN Setup
IPv6 Address Enter the LAN IPv6 address. The default address is fc00::1. (For more information, 
see IPv6 LANs on page
 153.)
IPv6 Prefix Length Enter the IPv6 prefix length, for example, 10 or 64. The default prefix length is 64.
DHCPv6
DHCP Status Enable the DHCPv6 server by selecting Enable DHCPv6 Server from the...

Configure the IPv6 LAN Settings 
168 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
9. Click the Apply button.
Your settings are saved.
Add an IPv6 LAN Address Pool
If you configure a stateful DHCPv6 server for the LAN, you must add local DHCP IPv6 
address pools so that the DHCPv6 server can control the allocation of IPv6 addresses in the 
LAN.
To add an IPv6 LAN address pool:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that...

Configure the IPv6 LAN Settings 
169  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > LAN Settings.
The LAN Setup screen displays the IPv4 settings.
7. In the upper right, select the IPv6 radio button. 
The LAN Setup screen displays the IPv6 settings. 
8. Under the List of IPv6 Address Pools table,...