Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Customize Firewall Protection 
220 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Change the Default Outbound Policy for LAN WAN Traffic
The default outbound policy allows all traffic to the Internet to pass through. You can then 
apply firewall rules to block specific types of traffic from going out from the LAN to the Internet 
(outbound). This feature is also referred to as service blocking. 
You can change the default policy of Allow Always to Block Always to block all outbound 
traffic,...

Customize Firewall Protection 
221  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type 
your password.
For the default administrative account, the default user name is admin and the default 
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the domain or...

Customize Firewall Protection 
222 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Change the Default LAN WAN Outbound Policy for IPv6 Traffic
The following procedure describes how to change the default outbound policy for IPv6 traffic 
from the LAN to the WAN.
To change the default outbound policy for LAN WAN IPv6 traffic:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation...

Customize Firewall Protection 
223  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. From the Default Outbound Policy menu, select Block Always.
By default, Allow Always is selected.
9. Click the Apply button.
Your settings are saved.
Add LAN WAN Rules
The following sections provide information about managing LAN WAN rules:
•Add LAN WAN Outbound Service Rules
•Add LAN WAN Inbound Service Rules
Add LAN WAN Outbound Service Rules
You can define rules that specify exceptions to the default rules....

Customize Firewall Protection 
224 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
•Add an IPv6 LAN WAN Outbound Rule
Add an IPv4 LAN WAN Outbound Rule
The following procedure describes how to add an IPv4 LAN WAN outbound rule.
To add an IPv4 LAN WAN outbound rule: 
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP address is...

Customize Firewall Protection 
225  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
7. Under the Outbound Services table, click the Add button.
The Add LAN WAN Outbound Service screen for IPv4 displays.
8. Make your selections from the menus and enter the settings.
For more information about the menus and settings, see Settings for Outbound Rules on 
page 212.  

Customize Firewall Protection 
226 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
The following table lists the menus that apply to an IPv4 LAN WAN outbound rule.
9. Click the Apply button.
Your settings are saved. The new rule is added to the Outbound Services table on the 
LAN WAN Rules screen.
Add an IPv6 LAN WAN Outbound Rule
The following procedure describes how to add an IPv6 LAN WAN outbound rule.
To add an IPv6 LAN WAN outbound rule: 
1. On your computer, launch an Internet browser.
2....

Customize Firewall Protection 
227  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
The Firewall submenu tabs display with the LAN WAN Rules screen in view, displaying 
the IPv4 settings.
7. In the upper right, select the IPv6 radio button.
The LAN WAN Rules screen displays the IPv6 settings.
8. Under the Outbound Services table, click the Add button.
The Add LAN WAN Outbound Service screen for IPv6 displays.
9. Make your selections from the menus and enter the settings.
For more information...

Customize Firewall Protection 
228 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
The following table lists the menus that apply to an IPv6 LAN WAN outbound rule.
10. Click the Apply button.
Your settings are saved. The new rule is added to the Outbound Services table on the 
LAN WAN Rules screen.
Add LAN WAN Inbound Service Rules
By default, all inbound traffic (from the Internet to the LAN) is blocked. Allowing inbound 
services opens potential security holes in your firewall. Enable only...

Customize Firewall Protection 
229  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Add an IPv4 LAN WAN Inbound Rule
The following procedure describes how you can add an IPv4 LAN WAN inbound rule.
To add an IPv4 LAN WAN inbound rule:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR...