NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual C4 – 141
Doc. No. 8201 - Release 1.0
July 2003
Callback RequestC-4
FEATURE 
DESCRIPTIONA Callback Request can be set to any Multiline Terminal to notify the user
that another station wants a call returned. Users of Multiline Terminals can
receive a maximum of three Callback Requests from other station users.
Non-display Multiline Terminal users receive a Feature LED indication when
a Callback Request is set. Single Line Telephone users can set but not
receive a Callback...

July 2003 NEC Business Solutions Ltd
142 – C4Callback Request
Doc. No. 8201 - Release 1.0
July 2003
1. PressPor lift the handset.
2. Dial the number to be called back, or assigned access code (not set
in default).
3. Lift the handset to talk when the party answers.
4. Hang up.
1. Press
Por lift the handset.
2. Dial assigned access code (not set in default).
3. Lift the handset to talk.
4. Hang up.
SERVICE 
CONDITIONSGeneral
	All stations can be used to set a Callback Request. A Callback
Request can be...

Xen IPK Features and Specifications Manual
Features and Specifications Manual C4 – 143
Doc. No. 8201 - Release 1.0
July 2003
	A Callback Request can be set to a Single Line Telephone (SLT), but
there is no indication at the SLT. The SLT can still go Off-hook and dial
L to complete the callback.
	To use Access Code #, this must be changed from function 096 to 026
in System Programming.
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line...

July 2003 NEC Business Solutions Ltd
144 – C4Callback Request
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual C5 – 145
Doc. No. 8201 - Release 1.0
July 2003
Caller ID Call ReturnC-5
FEATURE 
DESCRIPTIONThe Caller ID Call Return feature allows the voice mail system to use Caller
ID information captured with the message to call and connect the person
that left the message with the voice mail user that is checking messages.
After the call is ended by either party, the voice mail user returns to
checking messages.
SYSTEM 
AVAILABILITYTerminal Type:
All Multiline terminals and...

July 2003 NEC Business Solutions Ltd
146 – C5Caller ID Call Return
Doc. No. 8201 - Release 1.0
July 2003
1. Dial the XenMail extension.
2. During message playback, XenMail displays Caller ID name and/or
number only depending on system programming. To change display
between Name and Number, press 
V(MORE) Softkey twice then
press 
V(CID) Softkey.
- OR -
Dial
Kduring message to stop playback, save the current message
as an old message, and hear Caller ID number only.
Note:When Kis dialled, you can dialLto...

Xen IPK Features and Specifications Manual
Features and Specifications Manual C5 – 147
Doc. No. 8201 - Release 1.0
July 2003
SERVICE 
CONDITIONSData Assignment:
	Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection] Page 4, LK3 to allow (LED On) or Deny (default: LED Off)
capture of Caller ID information on voice mail ports.
	The Return Call feature can be enabled per mailbox in Expanded
Access Codes and can be enabled for internal numbers only or for
both internal and external numbers....

July 2003 NEC Business Solutions Ltd
148 – C5Caller ID Call Return
Doc. No. 8201 - Release 1.0
July 2003
General:
	A caller using a telephone without Softkeys, calling from outside the
system, or from a remote system is prompted to hear Caller ID
information and return a call.
	Return Call is available for subscriber messages and public messages.
	Return Call is accessible to a subscriber during and after message
playback.
	Return Call is available for new and old messages.
	Return Call is accessible to...

Xen IPK Features and Specifications Manual
Features and Specifications Manual C5 – 149
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BSCard Interface Slot Assignment 7-1
¶+BSMIF (ANI/Caller ID) Assignment 7-3-04
¶+AICaller ID Display Assignment for System Mode 1-1-78
¶+BTS4Class of Service (Station) Feature Selection 21-8-084-3, 4-4,
5-7, 6-5
¶+BCTDIT Assignment...

July 2003 NEC Business Solutions Ltd
150 – C5Caller ID Call Return
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK