NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual B4 – 121
Doc. No. 8201 - Release 1.0
July 2003
Battery Backup - 
System MemoryB-4
FEATURE 
DESCRIPTIONA battery is provided on the CPUI(  )-U( ) ETU, to retain System Program
Memory if power fails. When fully charged, the battery maintains backup
power for approximately 21 days. System Data, Speed Dial Memories, and
Clock/Calendar are among the functions protected by the backup battery.
When power is restored, the system returns to normal operation.
SYSTEM...

July 2003 NEC Business Solutions Ltd
122 – B4Battery Backup - System Memory
Doc. No. 8201 - Release 1.0
July 2003
	Battery backup on the CPUI( )-U(  ) ETU Unit retains memory for the
following functions:
1. System Program
2. Night Transfer Status
3. Call Forwarding
4. Callback Request
5. Speed Dial Memories (System/Station)
6. Clock/Calendar
7. Do Not Disturb (DND)
8. Save and Repeat
9. Store and Repeat
10. Last Number Redial
11. Message Waiting
12. Microphone Status
13. Station Lock (Set and Password)...

Features and Specifications Manual B5 – 123
Doc. No. 8201 - Release 1.0
July 2003
Battery Backup - System 
PowerB-5
FEATURE 
DESCRIPTIONA built-in battery provides complete system operating power for
approximately 30 minutes during commercial power outages. If optional
locally provided batteries are connected and fully charged, full system
operation can be maintained for an extended time. Actual time depends on
system configuration, traffic conditions, and the capacity of the batteries
being used.
SYSTEM...

July 2003 NEC Business Solutions Ltd
124 – B5Battery Backup - System Power
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual B6 – 125
Doc. No. 8201 - Release 1.0
July 2003
Busy Lamp Field on 
Multiline TerminalsB-6
FEATURE 
DESCRIPTIONThe Busy Lamp Field (BLF) feature indicates station status with LEDs. The
LEDs light for Feature Access keys and One-Touch keys (when applicable)
programmed for Direct Station Selection (DSS). This allows Multiline
Terminal users to determine at a glance if a station is in use.
SYSTEM 
AVAILABILITYTerminal Type
DTR/DTU-8D-(  ) TEL Up to 8 line keys
DTR/DTU-16D-(...

July 2003 NEC Business Solutions Ltd
126 – B6 Busy Lamp Field on Multiline Terminals
Doc. No. 8201 - Release 1.0
July 2003
1. PressT.
2. Press 
Q.
3. Press the One-Touch key.
4. Dial 
A.
5. Dial the station number.
6. Dial 
A (optional step, toggles call between voice and tone).
7. Press 
T.
SERVICE 
CONDITIONSData Assignment
	System Speed Dial (100 mode) must be assigned in System
Programming to enable programming line keys as Feature Access
keys. The user can then assign Feature Access keys as DSS/
BLF...

Xen IPK Features and Specifications Manual
Features and Specifications Manual B6 – 127
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BE
Speed Dial Buffer Allocation 1-1-35
¶+BTM
Line Key Selection for Telephone Mode 4-12 

July 2003 NEC Business Solutions Ltd
128 – B6 Busy Lamp Field on Multiline Terminals
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual C1 – 129
Doc. No. 8201 - Release 1.0
July 2003
Call Alert NotificationC-1
FEATURE 
DESCRIPTIONThe Call Alert Notification feature allows station users to receive an alert
tone, flashing ICM, Large LED, and LCD identification when an incoming
caller has called while the user station is busy. This allows the station user
to put the current call on hold to answer a second call, increasing call
handling abilities.
This feature works with Call Forward BNA so the second...

July 2003 NEC Business Solutions Ltd
130 – C1Call Alert Notification
Doc. No. 8201 - Release 1.0
July 2003
Restrictions
	If a station that has set DND receives a second call, no Call Alert
Notification tone is provided.
	A station does not receive Call Alert Notification if the Automatic Redial
feature is activated.
General
	This feature is provided for DID, DIT, Tie line, internal transferred calls,
and Automated Attendant transferred calls.
	If an Automated Attendant transferred call does not get...