NEC Xen Ipk Features And Specifications Manual

Xen IPK Features and Specifications Manual
Features and Specifications Manual A27 – 111
Doc. No. 8201 - Release 1.0
July 2003
SERVICE 
CONDITIONSData Assignment:
	By Class of Service (Attendant) assignment, Attendants are allowed to
set or cancel the Automatic Trunk-to-Trunk Transfer feature.
	Automatic Trunk-to-Trunk Transfer must be allowed in System
Programming and the CO/PBX providing the outside line must be
assigned with Automatic Release.
	An automatic disconnect timer is provided to release an...

July 2003 NEC Business Solutions Ltd
112  – A27 Automatic Trunk-to-Trunk Transfer
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BCT4Trunk Incoming Answer Mode Selection3-05
¶+AT4Automatic Tandem Trunk Assignment3-06
¶+BCT4Trunk-to-Trunk Transfer Yes/No Selection3-04
¶+BTS Class of Service (Attendant) Feature Selection 1 1-8-07 1-7
¶+BTTStation to Class of Service...

Features and Specifications Manual B1 – 113
Doc. No. 8201 - Release 1.0
July 2003
Background Music - 
Multiline SpeakerB-1
FEATURE 
DESCRIPTIONMusic on hold provides station background music through the station
speaker when the station is idle. A COI port can be used as an alternate
background music source.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals.
Required Components
None.
OPERATING 
PROCEDURES
1. Press BGM On/Off key (or press T+ BF).
2. Background Music is displayed on the Multiline...

July 2003 NEC Business Solutions Ltd
114 – B1 Background Music - Multiline Speaker
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BCS BGM Port Assignment 1-1-79
¶+BTS4  Class of Service (Station) Feature Selection 21-8-08 4-7
¶+BCS Hold Tone Source Selection 1-8-31
4When the system is at default this Memory Block must be programmed for the feature to be used. 

Features and Specifications Manual B2 – 115
Doc. No. 8201 - Release 1.0
July 2003
Background Music Over 
External SpeakersB-2
FEATURE 
DESCRIPTIONBackground music over external speakers is integrated with the three-zone
paging system that is provided by the ECR-U(  ) ETU. The connection is
extremely easy, and no external relay system is necessary. When a
zone (or all zones) is connected to paging, the Paging System BGM is
turned off automatically.
SYSTEM 
AVAILABILITYTerminal Type
Not applicable....

July 2003 NEC Business Solutions Ltd
116 – B2 Background Music Over External Speakers
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BSCard Interface Slot Assignment 7-1
¶+BPGeneral Purpose Relay Assignment 1-8-37
¶+BPExternal Speaker Connection Selection 1-7-02
¶+BPExternal Paging Alert Tone Selection 1-7-03
¶+BPExternal Paging Timeout Selection 1-7-06 

Features and Specifications Manual B3 – 117
Doc. No. 8201 - Release 1.0
July 2003
Barge-InB-3
FEATURE 
DESCRIPTIONThis programmable feature allows selected Multiline Terminal users in the
system to override another station user’s conversation with an audible alert
to that station user.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals.
Required Components 
None.
OPERATING 
PROCEDURES
1. Lift the handset or press P and receive internal dial tone. 
2. Press
T, then press R. 
3. Dial the station...

July 2003 NEC Business Solutions Ltd
118 – B3 Background Music Over External Speakers
Doc. No. 8201 - Release 1.0
July 2003
SERVICE 
CONDITIONSData Assignment
	Multiline Terminals, specified in System Programming, can be used to
interrupt the privacy status of conversations on outside lines.
	Barge-In can be allowed or disallowed by Class of Service.
	Each Barge-In in progress uses a conference circuit.
Restrictions
	Barge-In is not allowed for internal calls.
	Barge-In is not allowed until the Elapsed...

Xen IPK Features and Specifications Manual
Features and Specifications Manual B3 – 119
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BTS4Class of Service (Station) Feature Selection 21-8-08 1-4, 1-5
¶+BTT4Station to Class of Service Feature Assignment4-17
¶+BNTrunk to Tenant Assignment 2-01
¶+BCSPrivate Line Assignment 1-1-29
¶+BTTSLT Data Line Security Assignment...

July 2003 NEC Business Solutions Ltd
120 – B3 Background Music Over External Speakers
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK