NEC Xen Ipk Features And Specifications Manual

Xen IPK Features and Specifications Manual
Features and Specifications Manual C1 – 131
Doc. No. 8201 - Release 1.0
July 2003
	The following are the maximum incoming calls that can wait at
a station:
zDIT, DID, and Tie lines:
No Limitation
zInternal and Automated Attendant transferred calls:
No Limitation
	Calls in the Call Alert Notification condition cannot be answered using
Call Pickup.
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line...

July 2003 NEC Business Solutions Ltd
132 – C1Call Alert Notification
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual C2 – 133
Doc. No. 8201 - Release 1.0
July 2003
Call Appearance 
Keys (CAP)C-2
FEATURE 
DESCRIPTIONThe Call Appearance key feature automatically places an outside call onto a
Call Appearance key when the system is operated as a hybrid
(multifunction) system. These keys can be assigned on any Multiline
Terminal or the same key can appear on multiple terminals. This feature
allows efficient call handling when numerous CO calls are received, but a
limited number of CO line...

July 2003 NEC Business Solutions Ltd
134 – C2Call Appearance Keys (CAP)
Doc. No. 8201 - Release 1.0
July 2003
SERVICE 
CONDITIONSRestrictions
	A conference call involving two outside lines cannot reside on one Call
Appearance key.
General
	When a trunk call is originated or answered at a Multiline Terminal, it
must appear on a line key. The line key can be assigned as the trunk
itself or as a Call Appearance Key. A Call Appearance Key is dynamic
because a CAP key is used for any trunk call a multiline...

Xen IPK Features and Specifications Manual
Features and Specifications Manual C2 – 135
Doc. No. 8201 - Release 1.0
July 2003
RELATED 
FEATURES LIST
GUIDE TO 
FEATURE 
PROGRAMMINGFeature 
NumberFeature Name
C-3 Call Arrival Keys (CAR)
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BNLine Key Selection 2-05
¶+BNLine Key Selection for Tenant Mode 2-06
¶+BTT4Station to Call Appearance Block Assignment4-43
¶+BTM4Line Key Selection for...

July 2003 NEC Business Solutions Ltd
136 – C2Call Appearance Keys (CAP)
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual C3 – 137
Doc. No. 8201 - Release 1.0
July 2003
Call Arrival Keys (CAR)C-3
FEATURE 
DESCRIPTIONCall Arrival keys (CARs) are software extensions available as part of the
120 possible station numbers for the Xen IPK Expanded system. The IPK
Basic system provides 40 CARs in addition to the 32 possible
station numbers. A Call Arrival extension that is assigned to a line key, can
appear and ring on an individual station or multiple stations. When a call is
directed to a CAR,...

July 2003 NEC Business Solutions Ltd
138 – C3Call Arrival Keys (CAR)
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
	The Xen IPK Expanded system can contain up to 112 Call Arrival keys.
This number is shared with a maximum of 120 station ports. If 112
CARs are assigned, the remaining eight numbers can be assigned for
hardware extension numbers.
	Call Arrival keys are likely assigned to a Call Appearance block in
System Programming. Read the Call Appearance Key features and...

Xen IPK Features and Specifications Manual
Features and Specifications Manual C3 – 139
Doc. No. 8201 - Release 1.0
July 2003
	Go off-hook, press the Speaker key if Ringing Line Preference is
assigned, press the flashing Call Arrival key, or press the Answer key
to answer Calls ringing into a Call Arrival key.
	Call Arrival Keys can be set for Call Forward-All Calls and Call
Forward-Busy/No Answer.
	Call Arrival keys can be set for Call Forward - Off Premise.
	Off-Hook Ringing can be provided for calls...

July 2003 NEC Business Solutions Ltd
140 – C3Call Arrival Keys (CAR)
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK