NEC Neax2000 Ivs Command Manual

CHAPTER 3  ND-45669  (E)
C M 42
4.  DATA  T A BLE :
KIN D OF  SY STE M  COU NTER
~
~
~
~
~
~
~
~
~ 

ND -4 5669 ( E)  CHAPTER 3
CM 42
Note 1 :No “Lo ckou t A la rm  Di sp lay”  fu nctio n if thi s da ta  is  no t a ssign ed.
K IND  O F SYS TEM COUN TER
~
~
~
~
~ 

CHAPTER 3 ND-45669 (E)
Page 199-1 Addendum-001
Revision 2.1 AUGUST, 1998
CM42
COMMAND CODE TITLE:
SYSTEM COUNTER DATA/PAD DATA/TRUNK RESTRICTION CLASS
CONVERSION 42
4.2 PAD Data (Programmable)
PAD DATA PATTERNS
CONNECTING PATTERNS
(A – B)
CM35 YY=19
2ND DATA=0CM35 YY=19
2ND DATA=1CM35 YY=19
2ND DATA=2CM35 YY=19
2ND DATA=3
50
6550 54 58 62 STA – COT/ODT
51 55 59 63 TONE – COT/ODT
52 56 60 64 COT – COT/ODT
53 57 61 65 ODT/DTI – COT/ODT
50 54 58 62 STA/TONE – DTI
51 55 59 63 COT – DTI
52 56 60 64 ODT – DTI...

THIS PAGE INTENTIONALLY LEFT BLANK.
ND-45669 (E) CHAPTER 3
Addendum-001 Page 199-2
AUGUST, 1998 Revision 2.1
This page is for your notes. 

CHAPTER 3 ND-45669 (E)
Page 200 Addendum-002
Revision 2.2 JANUARY, 1999
CM42
COMMAND CODE TITLE:
SYSTEM COUNTER DATA/PAD DATA/TRUNK RESTRICTION CLASS
CONVERSION 42
T/R: Transmit/Receive
+: Gain
-: Loss
PAD DATA OF B TRUNK (T/R) [dB]
REMARKS
ODT
(4W E&M)ODT
(2W E&M)COT/DID DTI
00
1500 0/0 0/0 0/0 0/0
01 0/0 0/0 0/0 -2/-2
02 0/0 0/0 0/0 -3/-3
03 -2/-2 -3/-3 -3/-3 0/-6
04 -3/-3 0/0 0/0 -3/-8
05 -12/-11 -6/-6 -6/-6 +3/-3
06 -16/-11 0/0 0/+5 -6/-6
07 -6/-6 0/0 +3/+3 -8/-8
08
15Not UsedPATTERNS
2ND DATA
~
~ 

ND-45669 (E) CHAPTER 3
Pag e 2 01
Revision 2.0
CM42
COMMAND CODE TITLE:
SYSTEM COUNTER DATA/PAD DATA/TRUNK RESTRICTION CLASS
CONVERSION 42
4.3 Trunk Restriction Class Conversion (PBX ICS)
1 ST  DATA 2 ND DATA
REMARKS
DATA MEANING DATA MEANING
20 NEAX2000 IVS Trunk Rest.
Class 1 (RCA)00
15NEAX2400 IMS Trunk Rest.
Class (0 - 15)
21 NEAX2000 IVS Trunk Rest.
Class 2 (RCB)
22 NEAX2000 IVS Trunk Rest.
Class 3 (RCC)
23 NEAX2000 IVS Trunk Rest.
Class 4 (RCD)
24 NEAX2000 IVS Trunk Rest.
Class 5 (RCE)
25 NEAX2000...

CHAPTER 3 ND-45669 (E)
Pag e 2 02
Revision 2.0
CM42
COMMAND CODE TITLE:
SYSTEM COUNTER DATA/PAD DATA/TRUNK RESTRICTION CLASS
CONVERSION 42
Note 1:Initial Data in the Data Table represents the value for the data “NONE”. In this case, the fol-
lowing conversion is performed in the Deluxe Traveling Class Mark-CCIS.
(1) NEAX2400 to NEAX2000 IVS
(2) NEAX2000 IVS to NEAX2400
Note 2:This command should be used when changing the initial setting shown above, or when receiving
the NEAX2400 Trunk Restriction Class...

ND-45669 (E) CHAPTER 3
Addendum-002 Page 203
JANUARY, 1999 Revision 2.2
CM44
COMMAND CODE
TITLE:
EXTERNAL EQUIPMENT STARTING CONDITIONS
44
4. DATA TABLE:
1. FUNCTION:
This command assigns the relay (circuit number of the PN-DK00) used for controlling external equip-
ment.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
CIRCUIT NUMBER
RELATED
COMMANDREMARKS
NUMBER MEANING
XXX XX
X
 Circuit Number
(0-3)
Card Number
(00-31)CM10
Card number E8XX
CIRCUIT
ST + 44 + DE + NUMBER + DE + + + EXE
(3 digits)D ATA  1
(2...

CHAPTER 3 ND-45669 (E)
Pag e 2 04
Revision 2.0
CM44
COMMAND CODE
TITLE:
EXTERNAL EQUIPMENT STARTING CONDITIONS
44
DATA 1 DATA 2
RELATED
COMMAND
DATA MEANING DATA MEANING
00 External Hold Tone Machine Start
(TNT/COT Interface)00
09External Hold Tone for Music On 
HoldCM10
(DA00-DA09)
CM48
01 External Announcement Machine Start
(COT Interface)00 External Announcement Machine 
for wake-up callingCM10
CM48
02 Speaker Paging Machine Start 00
09Speaker Paging Zone 0
Speaker Paging Zone 9CM30 YY = 28
11...

ND-45669 (E) CHAPTER 3
Addendum-001 Page 205
AUGUST, 1998 Revision 2.1
CM45
COMMAND CODE
TITLE:
PURPOSE OF PBR/CFT
45
1. FUNCTION:
This command is used to define the presence and purpose of PB (DTMF) Receivers (PN-8RST) and
conference trunks. This command is also used to make CFTs and PBRs busy.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
PBR/CFT
ST + 45Y + DE + NUMBER + DE + + EXE
(2-3 digits)DATA
(1 digit)
[CM45] Purpose of PBR/CFT