NEC Neax2000 Ivs Command Manual

CHAPTER 3 ND-45669 (E)
Pag e 2 24
Revision 2.0
CM53
COMMAND CODE
TITLE:
TRUNK ANSWER FROM ANY STATION RESTRICTION
53
4. DATA TABLE:
1. FUNCTION:
This command is used to define the conditions for TAS service.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
: Initial Data
Y CONDITION SETTING DATA
No. MEANING CODE MEANING DATA MEANING
0
1
2
3
4TAS Answer A
(CM20-047)
TAS Answer B
(CM20-048)
TAS Answer C
(CM20-049)
TAS Answer D
(CM20-050)
TAS Answer E
(CM20-051)0 Answering a C.O. Ringdown 
Incoming Call (CM30...

ND-45669 (E) CHAPTER 3
Pag e 2 25
Revision 2.0
CM56
COMMAND CODE
TITLE:
INTERCOM ZONE PAGING GROUP/INTERCOM GROUP
56
MAT
4. DATA TABLE:
1. FUNCTION:
This command is used to assign the Multiline Terminal station number for Automatic/Manual/Dial
Intercom and Internal Zone Paging.
2. PRECAUTION:
This command is included in MAT mode menu “A8” (Intercom Group [COM01]).
3. ASSIGNMENT PROCEDURE:
: Initial Data
YY INTERCOM
No.
SERIAL No.SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
00
07Internal Zone...

CHAPTER 3 ND-45669 (E)
Pag e 2 26
Revision 2.0
CM56
COMMAND CODE
TITLE:
INTERCOM ZONE PAGING GROUP/INTERCOM GROUP
56
MAT
11 Assignment of 
Manual Intercom 
NumberA200
A700
A201
A701
A224
A724X
XXXXStation Number
(Primary Extension Number 
of the Multiline Terminal to 
be set)CM11
CM12 YY = 03
CM90
CM08-238
12 Assignment of Dial 
Intercom NumberB000
B900
B001
B901
B024
B924X
XXXXStation Number
(Primary Extension Number 
of the Multiline Terminal to 
be set)CM11
CM12 
CM90
CM08-239
: Initial Data
YY...

ND-45669 (E) CHAPTER 3
Pag e 2 27
Revision 2.0
CM58
COMMAND CODE
TITLE:
LDN DIVERSION
58
4. DATA TABLE:
Note:Data set by this command is effective based on the data assigned by CM50 YY = 01/02.
1. FUNCTION:
This command is used to assign information to each DID or TIE trunk for which incoming calls are to be
redirected to an alternative destination.
2. PRECAUTION:
This data is valid when CM08-205 is assigned to “0”.
3. ASSIGNMENT PROCEDURE:
LDN/TIE
NoteMEANING
00
01
08Effective data in CM35 YY = 15
LDN 0...

CHAPTER 3 ND-45669 (E)
Pag e 2 28
Revision 2.0
CM58
COMMAND CODE
TITLE:
LDN DIVERSION
58
: Initial Data
YY SETTING DATA
No. MEANING DATA MEANING
00 Tenant number of the LDN assigned by 
CM50-0100
63
None Tenant 00
Tenant 63
01 TAS group number assigned by CM44-13 00
63
None TAS Group 00
TAS Group 63
02 Day mode destination of the LDN 00
07
08
09
None ATTCON LDN/TIE Key 0
ATTCON LDN/TIE Key 7
TAS (See CM53)
Station/Outside Party  Note
03 Night mode destination of the LDN 00
09
None As per YY = 02
Note
04...

ND-45669 (E) CHAPTER 3
Pag e 2 29
Revision 2.0
CM58
COMMAND CODE
TITLE:
LDN DIVERSION
58
07 Night mode diversion for non-answering 
destination station00
08
None As per YY = 06
08 Day mode station number/Abbreviate Code 
for Outside Party (LDN-Outside)X
XXXX
CXX
None Station No.
Abbreviated Code for Outside Party 
(XX: 00 - 31, See CM71-66)
09 Night mode station number/Abbreviate 
Code for Outside Party (LDN-Outside)X
XXXX
CXX
None Station No.
Abbreviated Code for Outside Party 
(XX: 00 - 31, See...

CHAPTER 3 ND-45669 (E)
Pag e 2 30
Revision 2.0
CM59
COMMAND CODE
TITLE:
TAS/ACD/UCD RELAY INTERRUPTION PATTERN
59
4. DATA TABLE:
1. FUNCTION:
This command is used to assign the interruption pattern on the TAS and ACD/UCD indicators controlled
via the PN-DK00 card.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
: Initial Data
FUNCTION NUMBER PURPOSE DATA MEANING
00 TAS/ACD/UCD RELAY
INTERRUPTION PATTERN
(See CM44-13xx/14x)01 30 IPM
02 60 IPM
03 120 IPM
07 Steady on
FUNCTION
ST + 59 + DE + NUMBER + DE + +...

ND-45669 (E) CHAPTER 3
Pag e 2 31
Revision 2.0
CM5A
COMMAND CODE
TITLE:
VIRTUAL LINE 
– VIRTUAL TRUNK PATH SETTING
5A
4. DATA TABLE:
1. FUNCTION:
Specify a path between the virtual line and virtual trunk for Wireless Communication System.
2. PRECAUTION:
Combination of the virtual line and the virtual trunk must be as follows:
• Level 0 Trunk No. and Level 1 Station No.
• Level 2 Trunk No. and Level 3 Station No.
3. ASSIGNMENT PROCEDURE:
YY BLOCK No. SETTING DATARELATED
COMMAND
00 000 – 169
VIRTUAL TRUNK...

CHAPTER 3 ND-45669 (E)
Pag e 2 32
Revision 2.0
CM60
COMMAND CODE
TITLE:
ATT GROUP, FUNCTIONS
60
MAT
4. DATA TABLE:
1. FUNCTION:
This command is used to assign a number to an ATTCON for access on a tenant basis, and define the
consoles’ night switching ability, off-hook ringing, tone ringer, password code for Attendant Lockout
and Attendant Programming.
2. PRECAUTION:
(1) CM60 YY = 00, 01, 02, 04, 06 require a system reset after data setting.
(2) The password for ATTCON (YY = 30) cannot be assigned by the...

ND-45669 (E) CHAPTER 3
Addendum-002 Page 233
JANUARY, 1999 Revision 2.2
CM60
COMMAND CODE
TITLE:
ATT GROUP, FUNCTIONS
60
MAT
 
Note 1:These data are effective for NITE key on an ATTCON and Day/Night Mode Change on an
ATTCON. The NT switch is effective only on the Master ATTCON assigned by CM60 YY=01.
Note 2:In the initial data (NONE), the password code is set to “12345678”.
: Initial Data
YY GROUP NUMBER
RELATED
COMMAND
No. MEANING DATA MEANING
02
(A0)Trunk Restriction Class change by 
NT SwitchNote 10...