NEC Neax2000 Ivs Circuit Card Manual
Here you can view all the pages of manual NEC Neax2000 Ivs Circuit Card Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 61
ND-45504 (E) CHAPTER 4 Page 53 Revision 2.0 PN-AP00-A (AP00) PN-AP00-A (AP00) 1. Locations of Lamp, Switches, and Connectors PN-AP00-A (AP00) Card MB SW0 SENSE RUN MB SW1 WE RS3 L3 L2 L1 L0 RS2 RS1 RS0 J16
Page 62
CHAPTER 4 ND-45504 (E) Pag e 54 Revision 2.0 PN-AP00-A (AP00) (2) Lamp Indications Lamp Indications LAMP NAME COLOR FUNCTION RUN Green Flashes at 120 IPM while this card is operating normally. WE Red Not used. L0 - L3 GreenSecond data setting value for the first data 250 of CM D001 0 1 (port 0) - 3 (port 2) L3Indication of the transmitting status of port 0Indication of the status of CTS signal on port 0 - 2 L2Indication of the transmitting status of port 1Indication of the status of DCD signal on...
Page 63
ND-45504 (E) CHAPTER 4 Page 55 Revision 2.0 PN-AP00-A (AP00) (3) Switch Settings Switch Settings SWITCH NAMESWITCH NUMBERSETTING POSITIONFUNCTION CHECK SENSE (Rotary SW) Note 14 - FSet the switch to match the AP Number (04 - 15) to be set by CM05. 0 - 3 Not used MB (Toggle SW) Note 2UP For make-busy For normal operation SW1 (Piano Key SW) 1For normal operation OFF Not used 2For normal operation OFF For AP data clearing by CMD100/CMD101 3For normal operation OFF For AP data clearing by CMD100/CMD101 4...
Page 64
CHAPTER 4 ND-45504 (E) Pag e 56 Revision 2.0 PN-AP00-A (AP00) SW0 (Dip SW) 1 Note 3ONEnables the receive clock from the DCE (Mo- dem) side when the No. 0 Port is synchronous. (Clock is received at the RXC terminal.) OFF• Uses the internal clock as the receive clock when the No. 0 Port is synchronous • When the No. 0 Port is asynchronous 2ONEnables transmit clock from the DCE (Mo- dem) side when the No. 0 Port is synchronous. (Clock is received at the TXC (2) terminal.) OFF• Uses the internal clock as...
Page 65
ND-45504 (E) CHAPTER 4 Page 57 Revision 2.0 PN-AP00-A (AP00) The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned. Switch Settings (Continued) SWITCH NAMESWITCH NUMBERSETTING POSITIONFUNCTION CHECK SW0 5 Note 4ON• Uses the internal clock as the receive clock when the No. 0 Port is synchro- nous. • When the...
Page 66
CHAPTER 4 ND-45504 (E) Pag e 58 Revision 2.0 PN-AP00-A (AP00) Note 1: Set the groove on the switch knob to the desired switch position. Note 2:When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the circuit card. Note 3:The SW 1 is used to select the AP operating mode as shown below. On line : Normal operating mode. The AP should be always in the “On line”, other than when you delete the AP data. Off line : The mode for AP data clearing by the command CMD100/CMD101....
Page 67
ND-45504 (E) CHAPTER 4 Page 59 Revision 2.0 PN-AP01 (AP01) PN-AP01 (AP01) 1. Locations of Lamps, Switches, and Connectors PN-AP01 (AP01) Card 2. Lamp Indications Lamp Indications LAMP NAME COLOR FUNCTION RUN Green Flashes at 120 IPM while this card is operating normally. L0-L3L3 GreenIndication of the status of CTS signal on the RS-232C port. L2 Indication of the status of DCD signal on the RS-232C port. L1 Indication of the status of TXD signal on the RS-232C port L0 Indication of the status of RXD...
Page 68
CHAPTER 4 ND-45504 (E) Pag e 60 Revision 2.0 PN-AP01 (AP01) (3) Switch Settings Switch Settings SWITCH NAMESWITCH NUMBERSETTING POSITIONFUNCTION CHECK SENSE (Rotary SW) Note 14 - F Set the switch to match the AP Number (04 - 15) to be set by CM05. 0 - 3 Not used MB(Toggle SW) Note 2UP For make-busy For normal operation SW1 (Piano Key SW)1For normal operation OFF Not used 2For normal operation OFF Not used 3For normal operation OFF Not used 4For normal operation OFFNot used AP NO. SW NO.10 04 05 06 07...
Page 69
ND-45504 (E) CHAPTER 4 Page 61 Revision 2.0 PN-AP01 (AP01) The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned. Note 1:Set the groove on the switch knob to the desired switch position. Note 2:When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the circuit card. SW0 (Dip...
Page 70
CHAPTER 4 ND-45504 (E) Pag e 62 Revision 2.0 PN-BRTA (BRI) PN-BRTA (BRI) 1. Locations of Lamps, Switches, and Connectors PN-BRTA (BRI) Card SENS RUN MB B1 B2 D ALM SW0 SW1