NEC Neax2000 Ivs Circuit Card Manual
Here you can view all the pages of manual NEC Neax2000 Ivs Circuit Card Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 111
ND-45504 (E) CHAPTER 4 Page 89 Revision 2.0 PN-SC00 (CCH) (3) Switch Settings Switch Settings SWITCH NAMESWITCH NUMBERSETTING POSITIONFUNCTION CHECK SENS (Rotary SW) Note 14 - F Set the switch to match the AP Number (04 - 15) to be set by CM05. 0 - 3 Not used MB(Toggle SW) Note 2UP For make-busy For normal operation SW0 (Piano Key SW)1ON Loop-back test For normal operation 2ON Analog interface OFF Digital interface 3ONRS-232C RTS signal (to MODEM) ON Note 3 OFF RS-232C RTS signal (to MODEM) OFF 4Always...
Page 112
CHAPTER 4 ND-45504 (E) Pag e 90 Revision 2.0 PN-SC00 (CCH) The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned. Note 1:Set the groove on the switch knob to the desired switch position. Note 2:When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the circuit card. Note...
Page 113
ND-45504 (E) CHAPTER 4 Page 91 Revision 2.0 PN-SC01 (DCH) PN-SC01 (DCH) 1. Locations of Lamps, Switches and Connectors PN-SC01 (DCH) Card 2. Lamp Indications Lamp Indications LAMP NAME COLOR FUNCTION RUN Green Flashes at 120 IPM while this card is operating normally. LC Green Lights when communications are normally ongoing with the D channel data links connected. LPB Green Not used. SENS RUN MB SW0 LC LPB SW1
Page 114
CHAPTER 4 ND-45504 (E) Pag e 92 Revision 2.0 PN-SC01 (DCH) (3) Switch Settings Switch Settings SWITCH NAMESWITCH NUMBERSETTING POSITIONFUNCTION CHECK SENS (Rotary SW) Note 14 - F Set the switch to match the AP Number (04 - 15) to be set by CM05. 0 - 3 Not used MB(Toggle SW) Note 2UP For make-busy For normal operation SW0 (Piano Key SW) 1OFF AT&T Interface ON Northern Telecom Interface 2OFF No deletion ON Delete the first three digits of all 011 International Calls. 3 Always set to OFF 4 Always set to...
Page 115
ND-45504 (E) CHAPTER 4 Page 93 Revision 2.0 PN-SC01 (DCH) The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned. Note 1:Set the groove on the switch knob onto the intended switch position. Note 2:When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the circuit card.
Page 116
CHAPTER 4 ND-45504 (E) Pag e 94 Revision 2.0 PN-SC02 (ICH) PN-SC02 (ICH) 1. Locations of Lamps, Switches, and Connectors PN-SC02 (ICH) Card 2. Lamp Indications Lamp Indications LAMP NAME COLOR FUNCTION RUN Green Flashes at 120 IPM while this card is operating normally. DOPE0 GreenON: No. 0 circuit D channel link is connected. OFF: No. 0 circuit D channel link is not connected. DOPE1 GreenON: No. 1 circuit D channel link is connected. OFF: No. 1 circuit D channel link is not connected. RUN MB SW0 SENS...
Page 117
ND-45504 (E) CHAPTER 4 Page 95 Revision 2.0 PN-SC02 (ICH) (3) Switch Settings The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned. Note 1:Set the groove on the switch knob to the desired switch position. Note 2:When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the...
Page 118
CHAPTER 4 ND-45504 (E) Pag e 96 Revision 2.0 PN-SC03 (ICH) PN-SC03 (ICH) 1. Locations of Lamps, Switches, and Connectors PN-SC03 (ICH) Card 2. Lamp Indications Lamp Indications on ICH Card LAMP NAME COLOR FUNCTION RUN Green Flashes at 120 IPM while the card is operating normally. DOPE7 Green Lights when No.7 circuit D channel link is connected. DOPE6 Green Lights when No.6 circuit D channel link is connected. DOPE5 Green Lights when No.5 circuit D channel link is connected. DOPE4 Green Lights when No.4...
Page 119
ND-45504 (E) CHAPTER 4 Page 97 Revision 2.0 PN-SC03 (ICH) (3) Switch Settings The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned. Note 1:Set the groove on the switch knob to the intended switch position. Note 2:When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the...
Page 120
CHAPTER 4 ND-45504 (E) Pag e 98 Revision 2.0 PN-SC03 (CSH) PN-SC03 (CSH) 1. Locations of Lamps, Switches, and Connectors PN-SC03 (CSH) Card SENSE RUN MB DOPE7 DOPE6 DOPE5 DOPE4 DOPE3 DOPE2 DOPE1 DOPE0