NEC Neax2000 Ivs Circuit Card Manual
Here you can view all the pages of manual NEC Neax2000 Ivs Circuit Card Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 121
ND-45504 (E) CHAPTER 4 Page 99 Revision 2.0 PN-SC03 (CSH) (2) Lamp Indications 3. Switch Settings The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned. Note 1:Set the groove on the switch knob to the intended switch position. Note 2:When the power is on, flip the MB switch to ON (UP position) before...
Page 122
CHAPTER 4 ND-45504 (E) Page 100 Revision 2.0 4. LAMP INDICATIONS AND SWITCH SETTINGS OF LINE/TRUNK CIRCUIT CARDS Table 4-3 below shows the line/trunk circuit cards to be explained in this section. Table 4-3 Table of Line /Trunk Circuit Cards NAME (FUNCTIONAL NAME)EXISTENCE OF LAMPS X: PROVIDED — : NOT PROVIDED EXISTENCE OF SWITCHES X: PROVIDED — : NOT PROVIDED EXTRACTION/INSER- TION WITH POWER ON X: ALLOWED — : NOT ALLOWED REFERENCE PAGE PN-2AMPA (AMP) X— X101 PN-AUCA (AUC) X— X102 PN-CFTA (CFT)...
Page 123
ND-45504 (E) CHAPTER 4 Page 101 Revision 2.0 PN-2AMPA (AMP) PN-2AMPA (AMP) 1. Locations of Lamps, Switches and Connectors PN-2AMPA (AMP) Card 2. Lamp Indications 3. Switch Settings This card has no switches. Lamp Indications LAMP NAME COLOR FUNCTION BL0, 1 Red• Remains lit when the corresponding circuit is in use. • Flashes at 60 IPM when the corresponding circuit is in the make-busy state or the system data for this card is not assigned. BL1BL0
Page 124
CHAPTER 4 ND-45504 (E) Page 102 Revision 2.0 PN-AUCA (AUC) PN-AUCA (AUC) 1. Locations of Lamps, Switches and Connectors PN-AUCA (AUC) Card 2. Lamp Indications 3. Switch Settings This card has no switches. Lamp Indications LAMP NAME COLOR FUNCTION BL0, 1 Red• Remains lit when the corresponding circuit is in use. • Flashes at 60 IPM when the corresponding circuit is in the make-busy state or the system data for this card is not assigned. CN1 BL1 BL0
Page 125
ND-45504 (E) CHAPTER 4 Page 103 Revision 2.0 PN-CFTA (CFT) PN-CFTA (CFT) 1. Locations of Lamps, Switches and Connectors PN-CFTA (CFT) Card 2. Lamp Indications 3. Switch Settings This card has no switches. Lamp Indications LAMP NAME COLOR FUNCTION BL0 Red• Remains lit when the card is in use. • Flashes (60 IPM) When the circuit on the card is in the make-busy state on the system data for this card is not assigned. BL1
Page 126
CHAPTER 4 ND-45504 (E) Page 104 Revision 2.0 PN-4COTB (COT) PN-4COTB (COT) 1. Locations of Lamps, Switches and Connectors PN-4COTB (COT) Card 2. Lamp Indications 3. Switch Settings This card has no switches. Lamp Indications LAMP NAME COLOR FUNCTION BL0 - 3 Red• Remains lit when the corresponding circuit is in use. • Flashes at 60 IPM when the corresponding circuit is in the make-busy state or the system data for this card is not assigned. CN1 BL3 BL0 BL2 BL1
Page 127
ND-45504 (E) CHAPTER 4 Page 105 Revision 2.0 PN-4COTG (COT) PN-4COTG (COT) 1. Locations of Lamps, Switches and Connectors PN-4COTG (COT) Card 2. Lamp Indications 3. Switch Settings This card has no switches. Lamp Indications LAMP NAME COLOR FUNCTION BL0 - 3 Red• Remains lit when the corresponding circuit is in use. • Flashes at 60 IPM when the corresponding circuit is in the make-busy state or the system data for this card is not assigned. CN1 BL3 BL0 BL2 BL1
Page 128
CHAPTER 4 ND-45504 (E) Page 106 Revision 2.0 PN-2DATA (DAT) PN-2DATA (DAT) 1. Locations of Lamps, Switches and Connectors PN-2DATA (DAT) Card 2. Lamp Indications Lamp Indications LAMP NAME COLOR FUNCTION BL0, 1 Red• Remains lit when the corresponding circuit is in use. • Flashes at 60 IPM when the corresponding circuit is in the make-busy state or the system data for this card is not assigned. BL0 BL1 SW
Page 129
ND-45504 (E) CHAPTER 4 Page 107 Revision 2.0 PN-2DATA (DAT) (3) Switch Settings The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned. Switch Settings SWITCH NAMESWITCH NUMBERSETTING POSITIONFUNCTION CHECK SW (Piano Key SW)SW-0ONData write into the No.1 circuit is disabled. Data write into the No.1 circuit is...
Page 130
CHAPTER 4 ND-45504 (E) Page 108 Revision 2.0 PN-DK00 (DK) PN-DK00 (DK) 1. Locations of Lamps, Switches and Connectors PN-DK00 (DK) Card 2. Lamp Indications This card has no indicator lamps. 3. Switch Settings This card has no switches.