NEC Neax 2400 Ipx System Operations And Maintenance Manual

NDA-24307 CHAPTER 8
Page 633
Issue 1
DLSS_T: Display of Lock Out Station - Number- Telephone Number
DLSS_T:Display of Lock Out Station - Number- Telephone Number
1. Functional Outline
This command is used to print out stations in lockout state, by using Telephone Numbers. This command is
available at NCN (for Fusion network) only. 
Note
Note:
This command is available for PBX program software.
2. Parameters
Input data
Type: Printout of all lockout stations
Printout of lockout stations by tenant
Printout...

CHAPTER 8 NDA-24307
Page 634
Issue 1
DLTEL: Display of Telephone Number from LENS for LDM
DLTEL:Display of Telephone Number from LENS for LDM
1. Functional Outline
This command, available at each Local Node (LN), is used to display the Telephone Number or other station
data by designating a specific LEN.
2. Parameters
Input data
LENS: Line Equipment Number [6 digits]
Display data
UGN: User Group Number
TELN: Telephone Number [Max. 16 digits]
TN: Tenant Number
STN: Station Number [Max. 6 digits]
TEC:...

NDA-24307 CHAPTER 8
Page 635
Issue 1
DNTEL: Display of Telephone Number from LENS for NDM
DNTEL:Display of Telephone Number from LENS for NDM
1. Functional Outline
This command, available at Network Control Node (NCN) only, is used to display the Telephone Number or
other station data by designating a specific FPC and LEN.
2. Parameters
Input data
FPC: Fusion Point Code [1-253]
LENS: Line Equipment Number [6 digits]
Display data
UGN: User Group Number
TELN: Telephone Number [Max. 16 digits]
NID: Network...

CHAPTER 8 NDA-24307
Page 636
Issue 1
DPKG: Display of Setting Port Package
DPKG:Display of Setting Port Package
1. Functional Outline
This command is used to display the circuit card name accommodated in each Group of a specific UNIT.
Note 1:When using this command, make sure that each circuit card related database files have already been
installed to your MAT. (See FLINST command for more information.)
2. Parameters
Input data
MG: Module Group (MG) number [00-07]
UNIT: Unit (U) number [0-3]
Buttons
Get:...

NDA-24307 CHAPTER 8
Page 637
Issue 1
DPSW: Display Package Switch Status
DPSW:Display Package Switch Status
1. Functional Outline
This command is used to display the following information on a Line/Trunk or Control circuit card:
[When MAT is in On-Line Mode (=connected to the system)]
Current status of each switch
Explanation of each switch function
[When MAT is in Off-Line Mode (= not connected to the system)]
Explanation of each switch function
Note 1:When using this command, make sure that each...

CHAPTER 8 NDA-24307
Page 638
Issue 1
DPSW: Display Package Switch Status
Buttons
Get: Click to view the display data
Page Up: Click to view the next page data (when next page exists).
Page Down: Click to return to the previous page data.
Exit: Click to exit this command.
Display data
PKG Name: Circuit Card Name
Firm Name/Issue: Firm Name/Issue of the circuit cardEach switch data is also displayed on the dedicated
display page.
Each switch data is also displayed on the dedicated display page. 

NDA-24307 CHAPTER 8
Page 639
Issue 1
DSTN: Display of Station Data
DSTN:Display of Station Data
1. Functional Outline
This command is used to display the registered Station Data corresponding to the designated Tenant and Sta-
tion Number. In addition, the information of Hot Line, D
term Key Layout, Hunting, and Call Pickup, etc., can
also be displayed as the data related to the designated stations.
2. Parameters
Input data
TN: Tenant Number
STN: Station Number [0-9, #, * (Max. 6 digits)]
Buttons 
[For...

CHAPTER 8 NDA-24307
Page 640
Issue 1
DTELN: Display of Telephone Number Data for NDM
DTELN:Display of Telephone Number Data for NDM
1. Functional Outline
This command is used to display the registered station data corresponding to specified User Group Number
(UGN) and Telephone Number (TELN). The following data related to Number Group can be displayed by
clicking the selection button for each data. This command can be used only when logging in to Network
Control Node (NCN).
ACPGN: Call Pickup Group...

NDA-24307 CHAPTER 8
Page 641
Issue 1
DTF101: Display of Terminal Traffic Data
DTF101:Display of Terminal Traffic Data
1. Functional Outline
This command displays the result of traffic measurement data for Type= 1 (Terminal Traffic) assigned by the
ATRF command.
2. Parameters
Traffic Data 1: Terminal Traffic-DTF101
Route Traffic-DTF102
Station Peg Count-DTF103
Attendant Peg Count-DTF104
Route Peg Count-DTF105
Traffic Data 2: Service Peg Count-DTF201
Traffic Data 3: UCD Route Peg Count-DTF301
UCD Group Peg...

CHAPTER 8 NDA-24307
Page 642
Issue 1
DTF102: Display of Route Traffic Data
DTF102:Display of Route Traffic Data
1. Functional Outline
This command displays the result of traffic measurement data for Type= 2 (Route Traffic) assigned by the
ATRF command.
2. Parameters
Traffic Data 1: Terminal Traffic-DTF101
Route Traffic-DTF102
Station Peg Count-DTF103
Attendant Peg Count-DTF104
Route Peg Count-DTF105
Traffic Data 2: Service Peg Count-DTF201
Traffic Data 3: UCD Route Peg Count-DTF301
UCD Group Peg...