NEC Neax 2400 Ipx Office Data Specification
Here you can view all the pages of manual NEC Neax 2400 Ipx Office Data Specification. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 91
NDA-24298 CHAPTER 4 Page 57 Issue 1 ATIM : Assignment of Date and Time ATIM: Assignment of Date and Time 1. General This command sets the clock information for the system. Clock information is executed when Y is entered in the WRT? field and the Enter key pressed. 2. Precautions 1. The clock is assigned in military time. 2. Clock information assigned in this command is necessary for the following purposes: (a) To indicate time for D term and ATT (Desk Console/Hotel Console) (b) To specify the time for...
Page 92
CHAPTER 4 NDA-24298 Page 58 Issue 1 ATIMN : Assignment of Date and Time for NDM ATIMN: Assignment of Date and Time for NDM 1. General This command sets the clock information for all systems within the Fusion network. The time data assigned by this command is adjusted according to each LN’s time difference data assigned by the ATDF command, before updating the NDM at each LN. The completion of time data assignment for each LN is displayed on the MAT. 2. Precautions 1. Prior to this command, the time...
Page 93
NDA-24298 CHAPTER 4 Page 59 Issue 1 ATIMN : Assignment of Date and Time for NDM 3. Data Entry Instructions YEAR Enter the 4 digits of the year. (For example: 1999 or 2000) DATE TIME YEAR MONTH DAY HOUR MINUTE SECOND DAY Enter the digits with a range from 1 to 31. MINUTE Enter the digits with a range from 1 to 60. MONTH Enter the digits with a range from 1 to 12. HOUR Enter the digits with a range from 1 to 24. SECOND Enter the digits with a range from 1 to 60.
Page 94
CHAPTER 4 NDA-24298 Page 60 Issue 1 ASYD : Assignment of System Data ASYD: Assignment of System Data 1. General The ASYD/ASYDL command assigns the system data for the following node: Local Node (L/N)/Network Control Node (NCN) of the Fusion network. Stand-alone PBX 2. Precautions 1. The ASYD command contains the following indexes: SYS 1, INDEX 0-511 SYS 2, INDEX 0-15 SYS 3, INDEX 0-31 2. The ASYDL command contains the following indexes: SYS 1, INDEX 512-1535 SYS 2, INDEX 16-79 (Not used) 3. For...
Page 95
NDA-24298 CHAPTER 4 Page 61 Issue 1 ASYD : Assignment of System Data 3. Data Entry Instructions Define each bits corresponding data referring to the SYSTEM DATA CONTENTS SYSTEM DATA TYPE (SYS)DATA (DATA) 00-FF (Hex) SYSTEM DATA INDEX (INDEX) 0-511 BIT CORRE- SPONDING DATA DATA 0/1BITSYSTEM DATA CONTENTS DATA DATA BIT BIT DATA Hex 1 1b 0 b1 b2 b3 b4 b5 b6 b7 1 0 0 0 0 0 0n n+1 FF031 1 0 0 0 0 0 0b 0 b1 b2Not used Not used Not used Not used Not used Not used Number of zzz b 3 b4 b5 b6 b7 xxx service 0/1...
Page 96
CHAPTER 4 NDA-24298 Page 62 Issue 1 ASYD : Assignment of System Data 4. Data Sheet SYSTEM DATA TYPE (SYS)SYSTEM DATA INDEX (INDEX) 0 – 511DATA (DATA) 00 – FF (Hex)BIT CORRESPONDING DATA SYSTEM DATA CONTENTS DATA 0/1BIT 10 Number of Module Group (MG) IPX = 01~08 (MG00~07) (For IPX-UMG System) 01 Hex~20 Hex (MG00~MG32) 101 Number of Main Processor (fixed to “01”) 2 b00/1 = Built-in ACDP is not provided/provided. Also number of memory package. 3 b1-b7Not used Configuration of Time Division...
Page 97
NDA-24298 CHAPTER 4 Page 63 Issue 1 ASYD : Assignment of System Data 14b 0 Control of ORT all Busy Status 0/1 = ROT/Queue b 1 Recalling method when the caller has released with Emergency Call service 0/1 = SHF or Depressing Ground Button/Unconditional Re- calling Note:The operation procedure for recall is different depending on the D term Series III or Dterm Series E. Dterm III user operates with SHF. Dterm E user operates with transfer key. b 2Releasing Method for Station to Station Calling Service b...
Page 98
CHAPTER 4 NDA-24298 Page 64 Issue 1 ASYD : Assignment of System Data 15b 0 Access Code for C.F.-Busy Line and C.F. – Don’t Answer Services 0/1 = Same/Separate Note:If “0” is assigned, assign either SID: 10 or 12 in command ASPA. b 1Maximum number of Multiple Call Forwarding – All Calls/ Busy Line occurrences: b 3b2b1b3b2b1 0 00: 100: four times 0 01: 101: 0 10: twice 110: 0 11: three times 111: Note:This data is valid when SYS-1, INDEX 69, bit 7 is assigned as “1.” b 2 b3 b4 Miscellaneous Timer Counter...
Page 99
NDA-24298 CHAPTER 4 Page 65 Issue 1 ASYD : Assignment of System Data SYS1, INDEX 6, b4 ~ b6: Note:Can change the key Function using the AAKP command. 1. Desk Console (Business) Key Pattern (a) Add-on Console Key Pattern 2. Hotel Desk Console Key pattern (a) Add-on Console Key pattern TRKSL SVC SC SCRN DND OverrideHWS BV WUS DDS RCS MWS Check In AUD WUR DDR RCR MWR Check out STS LDN EMGTIE BVBUSY TRKSLATND NANS SCRecall SVCTF (FRL)(FX) (ICPT)PA G E StartREC Mute Pattern 4 (b4=0, b5=0, b6=1) LDN EMGTIE...
Page 100
CHAPTER 4 NDA-24298 Page 66 Issue 1 ASYD : Assignment of System Data (b) Add-on Console Key pattern 3. Desk Console (Business) Key pattern for Hotel application system (a) Add-on Console Key pattern (b) Add-on Console Key pattern TRKSL SC FRL CP DND OverrideCAS BV WUS DDS RCS MWS Check In AUD WUR DDR RCR MWR Check out STS CAS CCSA WATS CAS CCSA WATS LDN EMGTIE HPBusy DNDADM NANS OTRecall ICPTTF WAT SFX CCSAPA G E StartREC Mute Pattern 4 (b4=0, b5=0, b6=1) GST LDN EMGTIE BVBusy TRKSLATND NANS SCRecall...