NEC Neax 2400 Ipx Office Data Specification

NDA-24298 CHAPTER 2
Page 7
Issue 1
ASSIGNMENT
3. TCP/IP Considerations
The IPX MAT can communicate with the IPX via an Ethernet TCP/IP connection. In order for the IPX MAT to
communicate via TCP/IP, the PC must have its network software, including the TCP/IP drivers, installed and in
operation prior to installing the IPX MAT software.
If the PC does not have the network software installed and configured, a message indicating that the WINSOCK
2 setup has failed displays during the IPX MAT installation....

CHAPTER 2 NDA-24298
Page 8
Issue 1
ASSIGNMENT
4. Installing IPX MAT Software
The following provides step-by-step instructions for installing the IPX MAT software for Windows 95/NT onto
your hard disk.
1. Terminate all applications, prior to starting the installation process.
2. Insert the CD-ROM into the CD-ROM drive. (The IPX MAT installation program starts automatically.)
3. Enter your name and your company name on the User Information dialog box. Then, click Next.
Figure 2-6   IPX MAT User Information...

NDA-24298 CHAPTER 2
Page 9
Issue 1
ASSIGNMENT
4. Click Next on the Choose Destination Location dialog box to install the IPX MAT software in the default
directory.
Note:If you wish to install the software in another directory, you can click Browse to display a dialog box that
allows you to select or create another directory.
Figure 2-7   Choose Location Destination Screen
5. The dialog box, shown in Figure 2-8 (information on WINSOCK setup), appears. Click OK.
Figure 2-8   Winsock 2 Setup Message Dialog...

CHAPTER 2 NDA-24298
Page 10
Issue 1
ASSIGNMENT
6. File copy starts automatically, while the displayed dialog boxes (See Figure 2-9) show the on-going
situation.
Figure 2-9   IPX MAT Installation Screen
IPXMAT Installation
IPXMAT Setup
IPXMAT 

NDA-24298 CHAPTER 2
Page 11
Issue 1
ASSIGNMENT
7. If the Setup Complete dialog box appears on the screen, the file copies have finished successfully. Click
Finish to complete the IPX MAT software installation and restart your computer.
Note:You should always reboot your PC after installing the IPX MAT software. Any change made during the in-
stallation process does not take effect until the computer has been rebooted.
Figure 2-10   IPX MAT Setup Complete Dialog 

CHAPTER 2 NDA-24298
Page 12
Issue 1
ASSIGNMENT
8. Review the settings you have chosen, and then click Next. The Winsock2 Setup message box displays.
Note:If you are installing IPX MAT on an NT 4.0 workstation, the Winsock2 Setup message box does not display.
NT 4.0 does not require Winsock2 in order to run.
Figure 2-11   IPX MAT Installing Winsock2 Message Box
9. After Winsock2 is installed, the Winsock2 Setup dialog box displays. This is an informational message
only. Click OK to continue installing the...

NDA-24298 CHAPTER 2
 Page 13
Issue 1
ASSIGNMENT
10. Click OK. The DAO Welcome Screen displays.
Figure 2-13   DAO Welcome Screen
11. Click Next. The Select Components dialog box displays.
Figure 2-14   DAO Select Components Screen
NEAX2400IPX
NEAX2400IPX 

CHAPTER 2 NDA-24298
Page 14
Issue 1
ASSIGNMENT
12. Uncheck the ODBCDirect box and click Next. The Select Components dialog box displays.
Note:If you do not uncheck the ODBCDirect box, error messages display once the DAO Setup program
completes. IPX MAT will run properly even though these messages display.
Figure 2-15   Select Components Screen
13. Click Next. The DAO Setup Screen displays.
Figure 2-16   DAO Setup Screen 

NDA-24298 CHAPTER 2
 Page 15
Issue 1
ASSIGNMENT
14. After the DAO files are installed, the DAO Information message box displays. Click OK. The IPX MAT
Installation screen displays.
Figure 2-17   DAO Information Message
15. To run the IPX MAT software, click the IPX MAT icon on the desktop or select it from the Start/Program
menu. The IPX MAT menu displays as shown in Figure 2-18.
Figure 2-18   IPX MAT Main Menu
Command Folders
Tool BarTitle Bar
Enter commands here
Status Bar
Menu Bar 

CHAPTER 2 NDA-24298
Page 16
Issue 1
ASSIGNMENT
16. To configure the PBX Alias, use the instructions in Section 6.2, TCP/IP Connection.
Note:Once you have configured the IPX MAT, you can use the Run Command line to enter task commands, or
you can select the command from the Command Folders. You can also perform IPX MAT tasks using either
the menu items, or the icons equivalent to the menu items. 
Figure 2-19   IPX MAT Tool Bar
Collect New Traffic
Scan New Alarms/TrafficCollect New Alarms
Abort Data...