NEC Neax 2400 Ipx Office Data Specification

ND-70186 (E) COMMAND LIST
Page xv
Issue 1
AOSPLAssignment of Outgoing Selection Pattern for LDM291
AOSPNAssignment of Outgoing Selection Pattern for NDM293
APADAssignment of PAD Data611
APADNAssignment of PAD Data for NDM613
APCRAssignment of Primary Call Restriction Data390
APHNAssignment of Phantom Station Number420
APHNLAssignment of Phantom Station Number for LDM423
APHNNAssignment of Phantom Station Number for NDM425
APIPLAssignment of IP Address Data for LDM317
APIPNAssignment of IP Address Data...

COMMAND LIST ND-70186 (E)
Page xvi
Issue 1
ASDTAssignment of Station Data410
ASFCAssignment of Service Feature Restriction Class395
ASGDAssignment of Special Group Data727
ASGD_TAssignment of Special Group Data – Telephone Number729
ASHCAssignment of Station Hunting – Circular665
ASHCLAssignment of Station Hunting – Circular for LDM668
ASHCNAssignment of Station Hunting – Circular for NDM670
ASHPAssignment of Station Hunting – Pilot659
ASHPLAssignment of Station Hunting – Pilot for LDM661
ASHPNAssignment...

ND-70186 (E) COMMAND LIST
Page xvii
Issue 1
ATDPLAssignment of Toll Code Restriction for LDM376
ATDPNAssignment of Toll Code Restriction for NDM379
ATGLAssignment of Trunk Group Busy Lamp594
ATGLLAssignment of Trunk Group Busy Lamp for LDM596
ATIMAssignment of Date and Time57
ATIMNAssignment of Date and Time for NDM58
ATNRAssignment of Tenant Restriction Class Data405
ATRKAssignment of Trunk Data570
ATSTNAssignment of Telephone Number and Station Number for NDM960
ATTDAssignment of Trunk Test Data738...

COMMAND LIST ND-70186 (E)
Page xviii
Issue 1
This page is for your notes. 

NDA-24298 CHAPTER 1
Page 1
Issue 1
CHAPTER 1 INTRODUCTION
1. General
This manual describes how to operate the Maintenance Administration Terminal (MAT) and plan the office
data. It also contains descriptions of the parameters for the NEAX2400 IPX.
2. How to Follow This Manual
The contents of this manual are:
 CHAPTER 1 INTRODUCTION
This chapter explains how to use this manual.
CHAPTER 2 ASSIGNMENT
This chapter explains the system configuration and system specifications required to install and run the...

CHAPTER 1 NDA-24298
Page 2
Issue 1
This page is for your notes. 

NDA-24298 CHAPTER 2
Page 3
Issue 1
CHAPTER 2 ASSIGNMENT
1. General
This chapter describes the information needed to install and operate the Maintenance Administration Terminal
(MAT) software.
The IPX MAT software has the following functions:
• Allows user-friendly Graphical User Interface (GUI) with Microsoft Windows 95/NT.
 Provides both an Ethernet interface and a RS232C interface.
 Allows access to a node within the Fusion Link network using a simple Login operation,
 Supports remote maintenance...

CHAPTER 2 NDA-24298
Page 4
Issue 1
ASSIGNMENT
2.2 IPX MAT and IPX Connection
Figure 2-1 shows a serial/direct connection to the IOC card of IPX. The serial/direct connection allows you
to access the IPX and the different nodes via the Fusion Link.
Figure 2-1   Serial/Direct Connection to IPX
IPX MAT software supports serial/direct connection to the target IPX. As seen in Figure 2-2, a modem is
required at both the remote maintenance center and the IPX site. The LINE port of the modem located at
the IPX...

NDA-24298 CHAPTER 2
Page 5
Issue 1
ASSIGNMENT
2.3 Serial/Dialup Connection to IPX
Figure 2-2   Serial/Dialup Connection to IPX
The IPX MAT software provides an advanced communication software for IPX. IPX is maintained via the
LAN, WAN, or TCP/IP network on which it is running. Figure 2-3 shows the simple configuration of the
TCP/IP connection. Using this connection, any node within the Fusion Link network can be accessed from
IPX MAT.
Figure 2-3   TCP/IP Connection to Dual CPR of IPX
FUSION LINK
IPX...

CHAPTER 2 NDA-24298
Page 6
Issue 1
ASSIGNMENT
Figure 2-4 shows the configuration of the PBX and IPX MAT when connecting to an existing LAN. In most
cases you should use a network device such as a HUB or bridge to provide isolation from excessive network
traffic.
Figure 2-4   TCP/IP Connection (IP Address over the External LAN)
SERVER PC
LAN MATHUB MAT PRINTER10BASE-T straight cable
PC
IPX
LANI
LANI