NEC Neax 2400 Imx Wireless System Manual

CHAPTER 4 ND-70290 (E)
Pag e 1 44
Revision 3.0
TTC Q.931A PROTOCOL TIE LINE WITH PCS ROAMING
Note 1:
Automatic Announcement - PS Out of Zone/C.F. PS Incoming Incomplete may not be available. It depends
on Public ISDN Network.
When a PS has roamed to a Visitor PBX, all calls to the PS are transferred to the Visitor PBX via Q.931a/
IS-11572 line from the Home PBX.
Note 2:The ISDN terminal cannot transfer the call to a PS or provide the 3-party conference feature including a
PS.
Note 3:A PS can transfer the...

ND-70290 (E) CHAPTER 4
Page 145
Revision 3.0
TTC Q.931A PROTOCOL TIE LINE WITH PCS ROAMING
Table 4-10  List of CCIS Service Features for Q.931a 
×: Available : Conditionally available –: Not available/Not used
NAME OF SERVICE FEATURESVisitor PBX (Standalone)
REMARKS
From PS To PS
Attendant Controlled Conference - CCIS –×
Automatic Recall - CCIS×–
Brokerage Hotline - CCIS –×
Call Forwarding - All Calls - CCIS –×
Call Forwarding - Busy Line - CCIS –×
Call Forwarding - Don’t Answer - CCIS –×
Call Transfer -...

CHAPTER 4 ND-70290 (E)
Pag e 1 46
Revision 3.0
TTC Q.931A PROTOCOL TIE LINE WITH PCS ROAMING
Note 1:
If Visitor PS is busy, Step Call is not available.
Note 2:Supervisory Call - CCIS can be activated only when PS is ringing. Single Digit Station Calling - CCIS×–
Station Controlled Conference - CCIS –×
Step Call - CCIS –
Note 1
Supervisory Call - CCIS – –Note 2 Table 4-10  List of CCIS Service Features for Q.931a  (Continued)
×: Available : Conditionally available –: Not available/Not used
NAME OF SERVICE...

ND-70290 (E) CHAPTER 4
Page 147
Revision 3.0
TTC Q.931A PROTOCOL TIE LINE WITH PCS ROAMING
4. PROGRAMMING
 Access Code Assignment
1) ANPD (Numbering Plan Data)
Assign the first digit of the LCR access code for the TTC Q.931a protocol Tie Line.
2) ASPA (Special Access Code Data)
Assign the LCR access code for a dummy route number.
3) AMND (Maximum Necessary Digits Data)
Assign the Maximum Necessary Digits (MND) for each Destination Code (DC).
4) ARNP (Reverse Numbering Plan Data)
Assign the trunk access...

CHAPTER 4 ND-70290 (E)
Pag e 1 48
Revision 3.0
TTC Q.931A PROTOCOL TIE LINE WITH PCS ROAMING
 Trunk Data Assignment
1) ASYD (System Data)
Assign the following indexes.
SYS1 Index 186 b6: Assign 1 (CCIS/ISDN in service).
SYS1 Index 187: Assign 00 (Hex).
2) ARTD (Route Class Data)
Assign route class data for both Bch and Dch routes referring to Table 4-10.
3) ATRK (Trunk Data)
Assign Bch trunk data referring to Figures 4-2 through 4-5. Note that Dch trunk data is NOT 
assigned in this step. 
ATRK for...

ND-70290 (E) CHAPTER 4
Page 149
Revision 3.0
TTC Q.931A PROTOCOL TIE LINE WITH PCS ROAMING
Note:
Regarding the ARTD command, the same data “0 (User Side)” is also assigned at the opposite office.
However, for the switch setting on the circuit card, this setting must be different from the opposite office.
Table 4-11  Route Class Data Assignment Table for Q.931a
ROUTE CLASS DATA ROUTE CLASS DATA ROUTE CLASS DATA
FUNCTION CDN B-CH D-CH FUNCTION CDN B-CH D-CH FUNCTION CDN B-CH D-CH
OSGS 1 0 0 OC 24 0 0 TPQ...

CHAPTER 4 ND-70290 (E)
Pag e 1 50
Revision 3.0
TTC Q.931A PROTOCOL TIE LINE WITH PCS ROAMING
Figure 4-2  ATRK for 24PRT
Note:Slot X and Slot Y must be in the same HW.
Odd
Number
Group
Even
Number
GroupLevel Slot X Slot YLV  7
6
5
4
3
2
1
LV  0
LV  7
6
5
4
3
2
1
LV  0
Bch   8
7
6
5
4
3
2
Bch   1
 
Dch   2Dch    1
Bch  23
22
21
20
19
18
17
16
15
14
13
12
11
10
Bch    9
IF 16 PORTS/SLOT Group
  n+3
Group
  n+1
Group
  nLevel Slot
LV  7
6
5
4
3
2
1
LV  0
LV  7
6
5
4
3
2
1
LV  0LV  7
6
5
4
3
2
1
LV  0
LV  7...

ND-70290 (E) CHAPTER 4
Page 151
Revision 3.0
TTC Q.931A PROTOCOL TIE LINE WITH PCS ROAMING
Figure 4-3  ATRK for 24DTI + 2DCH
 When #0 DCH of 2DCH card is used.
Note:Slot X and Slot Y must be in the same HW.
Odd
Number
Group
Even
Number
GroupLevel Slot X Slot YLV  7
6
5
4
3
2
1
LV  0
LV  7
6
5
4
3
2
1
LV  0
Bch   8
7
6
5
4
3
2
Bch   1
 Dch    1
Bch  23
22
21
20
19
18
17
16
15
14
13
12
11
10
Bch    9
IF 16 PORTS/SLOTGroup
  n+3
Group
  n+1
Group
  nLevel Slot
LV  7
6
5
4
3
2
1
LV  0
LV  7
6
5
4
3
2
1
LV...

CHAPTER 4 ND-70290 (E)
Pag e 1 52
Revision 3.0
TTC Q.931A PROTOCOL TIE LINE WITH PCS ROAMING
Figure 4-4  ATRK for 30PRT
Note:Slot X and Slot Y must be in the same HW.
Odd
Number
Group
Even
Number
GroupLevel Slot X Slot YLV  7
6
5
4
3
2
1
LV  0
LV  7
6
5
4
3
2
1
LV  0
Bch   15
 
Bch    1
Dch    2Bch   30
Bch   16
Dch     1
IF 16 PORTS/SLOT Group
  n+3
Group
  n+1
Group
  nLevel Slot
LV  7
6
5
4
3
2
1
LV  0
LV  7
6
5
4
3
2
1
LV  0LV  7
6
5
4
3
2
1
LV  0
LV  7
6
5
4
3
2
1
LV  0Bch   30
Bch  16
Dch    1
Bch...

ND-70290 (E) CHAPTER 4
Page 153
Revision 3.0
TTC Q.931A PROTOCOL TIE LINE WITH PCS ROAMING
Figure 4-5  ATRK for 30DTI + 2DCH
 When #0 DCH of 2DCH card is used.
Note:Slot X and Slot Y must be in the same HW.
Odd
Number
Group
Even
Number
GroupLevelLV  7
6
5
4
3
2
1
LV  0
LV  7
6
5
4
3
2
1
LV  0
IF 16 PORTS/SLOTGroup
  n+3
Group
  n+1
Group
  nLevel Slot
LV  7
6
5
4
3
2
1
LV  0
LV  7
6
5
4
3
2
1
LV  0LV  7
6
5
4
3
2
1
LV  0
LV  7
6
5
4
3
2
1
LV  0Dch   2
IF 32 PORTS/SLOT  Group
  n+2
Slot 
Dch   2Slot X...