NEC Neax 2400 Imx Wireless System Manual

CHAPTER 5 ND-70290 (E)
Pag e 1 94
Revision 3.0
ACS DN
4. DATA SHEET
CS/ZT Data Assignment Sheet
PHS COM-
MUNITY 
NUMBER
(PCN)
1-1024FUSION
POINT CODE
(FPC)
1-253CALLING 
AREA NO.
(ERN)
1-32GROU
P NO.
(GRN)
1-8CS/
ZT 
NO.
(CSN
/
ZTN)
1-32TENANT 
NUMBER
(TN)
1-
SYSTEM 
MAXLENS
CS/
ZT
KIND
(KIND)
3, 4 MG 
00-07U
0-3G
00-23LV
0/4 

ND-70290 (E) CHAPTER 5
Page 195
Revision 3.0
ACS EL
ACSEL  : Assignment of Expansion CS/ZT System Data for Local Data Memory
1. GENERAL
This command is used to assign, delete and display the expansion CS/ZT System data in Local Node.
List Up Command : LCSEL
2. PRECAUTIONS
1. This command is used to the Local Node.
2. Enter “0” when you make the corresponding parameter invalid (NWNO., ADERA, CTRN).
3. This command can be used to change the data.
3. DATA ENTRY INSTRUCTIONS
 
PCN
ADERAEnter the PCN (PHS...

CHAPTER 5 ND-70290 (E)
Pag e 1 96
Revision 3.0
ACS EL
4. DATA SHEET
Expansion CS/ZT System Data Assignment Sheet
PHS COMMUNITY 
NUMBER
(PCN)
1-1024NETWORK NO.
(NWNO.) 
0001-FFFFADD AREA
(ADERA) 
01-FFCOUNTRY NO. 
(CTRN)NUMBER OF
PHS-MANAGER CODE 
(NPCD)
0-4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0 

ND-70290 (E) CHAPTER 5
Page 197
Revision 3.0
ACSEN
ACSEN  : Assignment of Expansion CS/ZT System Data for Network Data Memory
1. GENERAL
This commands is used to assign, delete, and display the expansion CS/ZT System data in Network Data
Memory.
2. PRECAUTIONS
1. This Command is used for the Network Control Node.
2.  Enter “0” when you make the corresponding parameter invalid (NWNO, ADERA, CTRN).
3. This command can be used to change the data.
3. DATA ENTRY INSTRUCTIONS
PCN
ADERAEnter the PCN (PHS...

CHAPTER 5 ND-70290 (E)
Pag e 1 98
Revision 3.0
ACS EN
4. DATA SHEET
Expansion CS/ZT System Data Assignment Sheet
PHS COMMUNITY 
NUMBER
(PCN)
1-1024NETWORK NO.
(NWNO.) 
0001-FFFFADD AREA
(ADERA) 
01-FFCOUNTRY NO. 
(CTRN)NUMBER OF
PHS-MANAGER CODE 
(NPCD)
0-4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0 

ND-70290 (E) CHAPTER 5
Page 199
Revision 3.0
ACS PL
ACSPL  : Assignment of CS/ZT Peg Count Data for Local Data Memory
1. GENERAL
This commands is used to assign, delete, and display the CS/ZT observed in the CS/ZT Peg Count, one of the
items for traffic measurement. Also, the measurement can be conducted on an-area-basis.
2. PRECAUTIONS
This command is used to the Local Node.
3. DATA ENTRY INSTRUCTIONS
PCN
ERNEnter the PCN (PHS Community Number)
Note: Group NO. available for inter-node
of the Fusion...

CHAPTER 5 ND-70290 (E)
Pag e 2 00
Revision 3.0
AHRTL
AHRTL  : Assignment of Home PBX Routing Number Data for Local Data Memory
1. GENERAL
This command is used to assign and display the Home PBX Routing Number data in Local Data Memory.
2. PRECAUTIONS
1. This command is used in the Local Node.
2. If HID and HAC are equal, this data assignment is not necessary.
3. DATA ENTRY INSTRUCTIONS
PCNHAC
Enter the PCN (PHS Community Number)
Note: Group NO. available for inter-node
of the Fusion NetworkEnter the HAC...

ND-70290 (E) CHAPTER 5
Page 201
Revision 3.0
AHRTL
4. DATA SHEET
HOME PBX routing number DATA Assignment Sheet
PHS COMMUNITY 
NUMBER
(PCN)
1-1024Home PBX Identify Number
(HID)
MAX: 7 digitsHome PBX Access Code
(HAC)
MAX: 6 digits 

CHAPTER 5 ND-70290 (E)
Pag e 2 02
Revision 3.0
ALVPL
ALVPL  : Assignment of LVP Code for Local Data Memory
1. GENERAL
This command is used to assign the LVP Code/SYS-ID Code.
2. PRECAUTIONS
This command is used to the Local Node.
3. DATA ENTRY INSTRUCTIONS
When KIND = 1 (Kind type, LVP Code) is assigned;
KIND OF CODE
( KIND )
1 / 2LVP CODE
 ( CODE )
26 DIGITS FIXZT COUNT
 ( ZT CNT )
0 - 768
KIND
Enter the kind of code type
1: LVP Code
2: SYS-ID Code
CODE
Enter the LVP system code ZT COUNT
This parameter...

ND-70290 (E) CHAPTER 5
Page 203
Revision 3.0
ALVPL
When KIND = 2 (Kind type, SYS-ID Code) is assigned;
KIND OF CODE
( KIND )
1 / 2SYS-ID
CODE
 ( CODE )
KIND
Enter the kind of code type
1: LVP Code
2: SYS-ID Code
CODE
Enter the SYS-ID Code SYSTEM IDENTIFY
This parameter is assigned
automatically with SYS-ID
Code.
PCN
Enter the PCN (PHS Community Number)
Note: Group NO. available for inter-node
of the Fusion NetworkPHS COMMUNITY
NUMBER
 ( PCN )
1 - 1024SYSTEM IDENTIFY
( SYS - ID)
00000001 - 
FFFFFFFF