NEC Neax 2400 Imx Wireless System Manual

CHAPTER 4 ND-70290 (E)
Pag e 1 84
Revision 3.0
GROUP CALL-AUTOMATIC CONFERENCE (20-PARTY)
 Cancel Procedure
When deleting the ASDT/ALGSL/APHNL command data assigned as conferee, the user must first,
delete the AHLGL data.10) ASHCN (Assignment of Station Hunting Group-Circular for NDM)
Assign Station Hunting Group-Circular between conference leader ports and/or conference 
leader ports for cascade connection on each set of CFTB circuit cards.
Note 11:This command is required, only when calling a...

ND-70290 (E) CHAPTER 4
Page 185
Revision 3.0
SHORT TEXT MESSAGE SERVICE
SHORT TEXT MESSAGE SERVICE
1. GENERAL Description
This feature enables a short text message (STM), once arrived at a mail box of the Short Text Message Server
(external equipment), to be automatically distributed to the addressee PS via Open Application Interface (OAI).
This feature also provides a Zip Tone and “TM WAITING” notification on the display (LCD) of the addressee
PS that is busy, and if the PS is out of zone, even makes...

CHAPTER 4 ND-70290 (E)
Pag e 1 86
Revision 3.0
SHORT TEXT MESSAGE SERVICE
2. OPERATING PROCEDURE
 By using PS function key, user can set a password (less than 4 digits) to the PS to enter STM (short text
message system) mode, if more details are required, please refer to “PS’s manual”.
 The STM transmitted to the PS while PS’s buffer (max. 10 messages) is busy is temporarily kept in STM
server. When requesting the STM, delete old STM data in the buffer using function Key. Then the PS
automatically...

ND-70290 (E) CHAPTER 5
Page 187
Revision 3.0
CHAPTER 5 COMMANDS
This chapter explains some commands added or revised in the PCS system. Table 5-1 below shows the list of related
commands.
Table 5-1  List of Commands 
COMMAND 
NAMEFULL COMMAND NAME
ACS DLAssignment of CS/ZT Data for Local Data Memory
AC SDNAssignment of CS/ZT Data for Network Data Memory
AC SELAssignment of Expansion CS/ZT System Data for Local Data Memory
ACS ENAssignment of Expansion CS/ZT System Data for Network Data Memory
ACS...

CHAPTER 5 ND-70290 (E)
Pag e 1 88
Revision 3.0
COMMANDS
*ALRTNAssignment of Logical Route for Network Data Memory
*ANSDLAssignment of Number Sharing Data for Local Data Memory
*ANSDNAssignment of Number Sharing Data for Network Data Memory
APMDAssignment of Trunk Line Appearance Maximum Necessary Digit for DM
APMLLAssignment of PS Multiline Data for Local Data Memory
APMLNAssignment of PS Multiline Data for Network Data Memory
APSPAssignment of Trunk Line Appearance for DM
AZDLZT Program Download...

ND-70290 (E) CHAPTER 5
Page 189
Revision 3.0
COMMANDS
1. COMMAND DESCRIPTION AND DA T A   S H E E T   F O R   A S S I G N M E N T
This chapter explains assignment commands and their parameters for this system. The contents of each
assignment command description are illustrated in Figure 5-1.
Figure 5-1  Command Descriptions
Command name
The assigned data dump  into the designated file by the 
list up command shown here.Command name (full name)
The purpose of command and the related service
feature are...

CHAPTER 5 ND-70290 (E)
Pag e 1 90
Revision 3.0
ACS DL
ACSDL  : Assignment of CS/ZT Data for Local Data Memory
1. GENERAL
This command is used to assign, delete, and display the CS/ZT-related data. A CSINT circuit card can
accommodate four CSs/ZTs, allowing each two groups of the Levels 0 and 4 to be assigned for one circuit card.
List Up Command: LCSDL
2. PRECAUTIONS
1. This command is used for the Local Node.
2. When assigning LENS, CS/ZT should be assigned in the Group of less than 24 and the Levels to...

ND-70290 (E) CHAPTER 5
Page 191
Revision 3.0
AC SDL
4. DATA SHEET
CS/ZT Data Assignment Sheet
PHS 
COMMUNITY 
NUMBER
(PCN)
1-1024CALLING 
AREA NO.
(ERN)
1-32GROUP 
NO.
(GRN)
1-8CS/ZT 
NO.
(CSN/
ZTN)
1-32TENANT 
NUMBER
(TN)
1-
SYSTEM 
MAXLENS
CS/ZT 
KIND
(KIND)
3, 4 MG 
00-07U
0-3G
00-23LV  
0/4 

CHAPTER 5 ND-70290 (E)
Pag e 1 92
Revision 3.0
ACS DN
ACSDN  : Assignment of CS/ZT Data for Network Data Memory
1. GENERAL
This command is used to assign, delete and display the CS/ZT-related data of the Network Control Node (NCN).
A CSINT circuit card can accommodate four CSs/ZTs, allowing each two groups of the Levels 0 and 4 to be
assigned for one circuit card.
List Up Command: LCSDN
2. PRECAUTIONS
1. This command is used for the Network Control Node.
2. When assigning LENS, CS/ZT should be assigned...

ND-70290 (E) CHAPTER 5
Page 193
Revision 3.0
ACS DN
3. DATA ENTRY INSTRUCTIONS
PCN
GRN
Enter the PCN (PHS Community Number)
Note: Group NO. available for inter-node
           of the Fusion Network
Enter the GRN (Group 
Number)TN
Enter the TN (Tenant Number)
PHS
COMMUNITY
NUMBER
 ( PCN )
1 - 1024FUSION
POINT CODE
( FPC )
1 - 253CALLING 
AREA
NUMBER
 ( ERN )
1 - 32GROUP
NUMBER
 ( GRN )
1 - 8TENANT
NUMBER
( TN )
1-SYSTEM MAX
EQUIPMENT
NUMBER
( LENS ) CS / ZT  
NUMBER
 ( CSN / ZTN )
1 - 32CS / ZT  KIND
 (...