NEC Neax 2400 Imx Wireless System Manual
Here you can view all the pages of manual NEC Neax 2400 Imx Wireless System Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 141
CHAPTER 4 ND-70290 (E) Pag e 1 24 Revision 3.0 NUMBER SHARING 5. PROGRAMMING 1) ASYD (System Data) SYS1 INDEX 513 (LDM Memory Usage): Assign data “1” for the corresponding memory block. INDEX 514 (NDM Memory Usage): Assign data “1” for the corresponding memory block. 2) ANSDN/ANSDL (Number Sharing Data) M-UGN: Main User Group Number S-UGN: Sub User Group Number M-TELN: Main Telephone Number (Max. 16 digits) S-TELN: Sub Telephone Number (Max. 16 digits) OD: Output External Equipment Note 1 0: Only Main...
Page 142
ND-70290 (E) CHAPTER 4 Page 125 Revision 3.0 PCS ROAMING PCS ROAMING 1. GENERAL DESCRIPTION This feature allows a PS to move to another PBX which has a different SYS-ID via Q. 931a or IS-11572 connection. The PBX which PS can roam from/to is assigned Network Number (NWN). Network Number must be assigned as a unique number for each network. 2. OPERATING PROCEDURE 1. PS moves to another PBX which has a different SYS-ID. 2. PS registers its location automatically at Visitor PBX to the Home PBX via Q. 931a...
Page 143
CHAPTER 4 ND-70290 (E) Pag e 1 26 Revision 3.0 PCS ROAMING 11. Roaming PS cannot use OAI features. < Series 7400 (Release 8) software enhancement > From Series 7400 or later software, a PS can move to any node of the Fusion network that has a different SYS- ID, on condition that a Q.931a/IS-11572 Tie Line is established between the different SYS-ID Fusion networks. Figure 4-1 depicts this software enhancement, in comparison with the former software capability. Figure 4-1 PS Roaming in Release 8...
Page 144
ND-70290 (E) CHAPTER 4 Page 127 Revision 3.0 PCS ROAMING 4. PROGRAMMING Basic Data Assignment ARTD Assignment of Route Class Data Assign Q.931 Route Class D Channel and B Channel. (Refer to Table.) ATRK Assignment of Trunk Data MBTK Make Busy Trunk Data Make Idle the B channels. ANPD Assignment of Numbering Plan Data Assign the first digits of the Visiting PS. Also, include the Numbering Plan of the Self- PBX Office Code and the Office Code of the destination PBX. ASPA Assignment of Special...
Page 145
CHAPTER 4 ND-70290 (E) Pag e 1 28 Revision 3.0 PCS ROAMING CS/ZT Settings - Office DataARSC Asignment Route Restriction Service Class Allow for Icoming and Outgoing Route Restrictions ARRC Assignment of Alternative Route Restrictions ICRT: B Chn/D Chn OGRT: 31 ARI: A/D-RES: 1 OGRT: 31 ICRT: B Chn/D Chn ARI: A/D-RES: 1 ADPC Assignment of Determinate Point Code RT: B Chn PC: Destination Office Code RT: D Chn PC: Destination Office Code ACSC Assignment of CSC Data Assign CSC Data to D Channel LEN...
Page 146
ND-70290 (E) CHAPTER 4 Page 129 Revision 3.0 PCS ROAMING PS Office Data Setting Note:A closed Numbering Plan shall be used when assigning the Visitor PS. The Logical Number of the Visiting PS must correspond to the Logical Numbering Plan of the Home PBX. Set PS Roaming / Visitor OfficeAPSD Assignment of PS Data TN: 1 PSSTN: PS Physical Station Number KIND: 6 RSC: 1 SFC: 1 PS ID: ID Number Assigned (9 Digits Maximum) TYPE: 2 (Fixed) PSNO: XXXYYYY Note NWN: Same as Set in ACSEL Command CTRN: 794...
Page 147
CHAPTER 4 ND-70290 (E) Pag e 1 30 Revision 3.0 PCS ROAMING Table 4-1 Roaming Class Data List B Channel Route Data CDN DATA CDN DATA CDN DATA 001 OSGS 0 042 TRSC 0 083 CST 4 002 ONSG 2 043 BT 0 084 CSEG 0 003 ISGS 0 044 PRV 0 085 CSEU 0 004 INSG 2 045 A/D 1 086 CSEL 0 005 TF 3 046 CW 1 087 CMP 0 006 TCL 4 047 TPQ 0 088 TALK 0 007 L/T 1 048 BL 0 089 FOT 0 008 RLP 2 049 TRKS 0 090 RST 0 009 TQ 0 050 DPLY 1 091 TOCI 0 010 SMDR 0 051 ACD 0 092 TOCD 0 011 TD 0 052 2W/4W 0 093 ODGD 0 012 DR 0 053 FAAT 0 094...
Page 148
ND-70290 (E) CHAPTER 4 Page 131 Revision 3.0 PCS ROAMING Table 4-1 Roaming Class Data List (Continued) D Channel Route Data CDN DATA CDN DATA CDN DATA 001 OSGS 0 042 TRSC 0 083 CST 4 002 ONSG 2 043 BT 0 084 CSEG 0 003 ISGS 0 044 PRV 0 085 CSEU 0 004 INSG 2 045 A/D 1 086 CSEL 0 005 TF 3 046 CW 1 087 CMP 0 006 TCL 4 047 TPQ 0 088 TALK 0 007 L/T 1 048 BL 0 089 FOT 0 008 RLP 2 049 TRKS 0 090 RST 0 009 TQ 0 050 DPLY 1 091 TOCI 0 010 SMDR 0 051 ACD 0 092 TOCD 0 011 TD 0 052 2W/4W 0 093 ODGD 0 012 DR 0 053...
Page 149
CHAPTER 4 ND-70290 (E) Pag e 1 32 Revision 3.0 TTC Q.931A PROTOCOL TIE LINE WITH PCS ROAMING TTC Q.931A PROTOCOL TIE LINE WITH PCS ROAMING 1. GENERAL DESCRIPTION When the Built-in PCS system is connected to another Built-in PCS system, TTC Q.931a protocol Tie Line can be used as an interface for call origination and termination with PCS Roaming feature. Note:From software Series 7400 or later, a PS can move to any node of the Fusion network that has a different SYS-ID. Refer to PCS Roaming (Release 8...
Page 150
ND-70290 (E) CHAPTER 4 Page 133 Revision 3.0 TTC Q.931A PROTOCOL TIE LINE WITH PCS ROAMING 2. OPERATING PROCEDURE No manual operation is required. 3. SERVICE CONDITIONS Table 4-2 through 4-10 show functions available for TTC Q.931a protocol Tie Line with PCS Roaming feature. OG Call Features : Table 4-2 IC Call Features : Table 4-3 Station Service Features : Table 4-4 Other Service Features : Ta b l e 4 - 5 Attendant Console Service Features : Table 4-6 Network Service Features : Ta b l e 4...