NEC Neax 2400 Imx Wireless System Manual

CHAPTER 4 ND-70290 (E)
Pag e 9 4
Revision 3.0
OFFICE DATA ASSIGNMENT
1.2 ZT OFFICE DATA ASSIGNMENT
 CSINT circuit card can accommodate a maximum of four ZTs.
 Every ZT has three speech channels in the form of 3B+D.
 Each ZT is provided with PHS Community, Calling Area, Group and ZT number, given a maximum
capacity to have 32 areas while each area has eight groups. One group can house 32 ZTs.
PHS Community: PHS community having the same SYS-ID is identified by PHS community Number
(PCN).
Calling Area:...

ND-70290 (E) CHAPTER 4
Page 95
Revision 3.0
OFFICE DATA ASSIGNMENT
1. ZT Initial Start-Up
1) ASYD (Assignment of System Data)
CCIS ISDN function simultaneously becomes valid when the ZT operation is attempted to be in 
service, as the ZT is regarded as a terminal of the ISDN.
SYS1
SI186 
Note 1
b6=1 (CCIS function in service)
SI220 
Note 1
b6=0 (ISDN function in service)
Note 1:ISDN and CCIS data become valid, but where the ISDN and CCIS functions are not to be
used, optional software concerning ISDN and...

CHAPTER 4 ND-70290 (E)
Pag e 9 6
Revision 3.0
OFFICE DATA ASSIGNMENT
2.  Add Operating ZT
1) Installation of Additional ZT
2) Call LVP Server system
3) ALVPL (Assignment of LVP Code for Local Data Memory)
KIND=1
Assign the LVP Code
ACSDL (Assignment of CS/ZT Data for Local Data Memory)
This command is used to assign the ZT related data including the PHS Community Number, 
Calling Area No., Group No., ZT No., ZT LENS, ZT KIND.
When this data assignment is finished, 3B+D channels of the CSINT circuit card...

ND-70290 (E) CHAPTER 4
Page 97
Revision 3.0
OFFICE DATA ASSIGNMENT
3. ZT Deletion Procedure
1) MBCSL (MAKE BUSY of CS/ZT for Local Data Memory)
2) ACSDL (Assignment of CS/ZT Data for Local Data Memory)
Delete the ZT Data.
 START
 END 

CHAPTER 4 ND-70290 (E)
Pag e 9 8
Revision 3.0
OFFICE DATA ASSIGNMENT
1.3 PS OFFICE DATA ASSIGNMENT
Below are explanations about assigning office data by which the PS can be in operation in the Built-in PCS
system.
1. Initial Start-UP of the PS
2. Addition of the PS
1) APSD (Assignment of the PS Operation Data for DM)
This command assigns the PS operation data including its tenant No., station No., Service Feature 
Restriction Class (SFC) and the Route Restriction Class (RSC) in consideration of the...

ND-70290 (E) CHAPTER 4
Page 99
Revision 3.0
OFFICE DATA ASSIGNMENT
3. Deletion of the PS data
1) ALGSL (Assignment of Telephone Number Data for Local Data Memory)
Delete the related Telephone Number and LENS.
2) APSD (Assignment of the PS Operation Data for DM)
Using this command, delete the PS data to be cleared such as tenant No., station No., SFC and 
RSC.
 END
 START 

CHAPTER 4 ND-70290 (E)
Pag e 1 00
Revision 3.0
OFFICE DATA ASSIGNMENT
2. BASIC OFFICE DATA ASSIGNMENT (FUSION)
2.1 SYSTEM DATA
The following data assignment is necessary for activating the PCS service.
Note:For more detail about the data above, refer to the ASYD command in Chapter 5. ASYD-SYS1
SI30=06
SI420
b0: Access code using the Pre-Set dialing
0/1: Out/In service (Normal Setting)
SI421
SI422
SI423:  AUTOMATIC ANNOUNCEMENT-PS OUT OF ZONE disconnection timer
: No tone connection timer to the called...

ND-70290 (E) CHAPTER 4
Page 101
Revision 3.0
OFFICE DATA ASSIGNMENT
2.2 ZT OFFICE DATA ASSIGNMENT
 CSINT circuit card can accommodate a maximum of four ZTs.
 Every ZT has three speech channels in the form of 3B+D.
 Each ZT is provided with PHS Community, Calling Area, Group and ZT number, given a maximum
capacity to have 32 areas while each area has eight groups. One group can house 32 ZTs.
PHS Community: PHS community having the same SYS-ID is identified by PHS community Number
(PCN).
Calling Area:...

CHAPTER 4 ND-70290 (E)
Pag e 1 02
Revision 3.0
OFFICE DATA ASSIGNMENT
1. ZT Initial Start-Up
1) ASYD (Assignment of System Data)
CCIS ISDN function simultaneously becomes valid when the ZT operation is attempted to be in 
service, as the ZT is regarded as a terminal of the ISDN.
SYS1
SI186 
Note 1
b6=1 (CCIS function in service)
SI220 
Note 1
b6=0 (ISDN function in service)
Note 1:ISDN and CCIS data become valid, but where the ISDN and CCIS functions are not to be
used, optional software concerning ISDN...

ND-70290 (E) CHAPTER 4
Page 103
Revision 3.0
OFFICE DATA ASSIGNMENT
2. Procedure to Add Operating ZT7) ACSDN (Assignment of CS/ZT Data for Network Data Memory)
This command is used to assign the ZT related data including the PHS Community No., Fusion 
Point Code, Calling Area No., Group No., ZT No., ZT LENS, ZT KIND.
When this data assignment is finished, 3B+D channels of the CSINT circuit card start-up.
 PHS Community Number : 1~1024
 FPC : Fusion Point Code
 Calling Area Number : 1-32
 Group Number...