NEC Neax 2400 Imx Feature Programming Manual

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 567
Prime Line Pickup - DtermP-13D
P-13D Prime Line Pickup - Dterm
General Description
This feature allows a Dterm user to originate or answer a call from the line designated as the Primary Line by going
off-hook. It is unnecessary to press the associated line key.
Operating Procedure
Lift the handset or press the SPEAKER key; receive dial tone.
Service Conditions
1. One Prime Line per station is allowed.
2. Unless otherwise programmed,...

NEAX2400 IMX Feature Programming Manual
Page 568ND-70184 (E), Issue 3
P-13D Prime Line Pickup - Dterm
Programming (cont’d)
2: Multi-line Key
KD: 0
TN: Tenant
STN: Station Number
RG: Ringing Assignment per multi-line appearance
0: No Ringing.
1: Ringing in Day Mode Only.
2: Ringing in Night Mode Only.
3: Ringing in Day and Night Mode. 

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 569
Privacy - DtermP-14D
P-14D Privacy - Dterm
General Description
This feature allows a Dterm to establish privacy so that no station can interrupt a call via EXECUTIVE RIGHT-OF-
WAY [E-1].
Operating Procedure
1. Go off-hook; receive dial tone. Press the DO NOT DISTURB (DND) key. The associated LED will flash.
The LCD displays:
2. Dial the desired number.
3. When the call is completed, Privacy is cancelled by going on-hook.
Service...

NEAX2400 IMX Feature Programming Manual
Page 570ND-70184 (E), Issue 3
P-14D Privacy - Dterm
Programming (cont’d)
KYN: Key Number (1-40)
KYI: Service Index
0: Key Not Used
1: Feature Key 
2: Multi-line Key
KD: Not assigned for Feature Key
FKY: Feature Key Number
FKY = 50, DO NOT DISTURB
STEP 2:ADSL - Assign DND key; SN=1, 2, 3, 4, 5, 6, 7, 15 and FKY=50 (Do Not Disturb).
This command is required for assigning a function to each soft key. 

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 571
Privacy On All Lines - DtermP-15D
P-15D  Privacy On All Lines - Dterm
General Description
This feature restricts Dterm users from pressing a busy line button and entering a conversation, which can occur with
1A2 key telephones without exclusion circuits.
Operating Procedure
No manual operation is required.
Service Conditions
1. A Dterm user cannot seize the Prime Line if it is busy.
2. LINE PRESELECTION [L-9D] is denied if the...

NEAX2400 IMX Feature Programming Manual
Page 572ND-70184 (E), Issue 3
P-18 Privacy Release
P-18 Privacy Release
General Description
This feature allows multiple stations (maximum 6) accommodated in the same multi-line group to override a Dterm
already engaged in communication. Also, by key operation of the Dterm already engaged in communication
(maximum of 8-party communication), overriding from other stations in the same multi-line group can be restricted.
Operating Procedure
To establish a 4-party call...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 573
Privacy Release P-18
Operating Procedure (cont’d)
3. Station A lifts handset or presses SPEAKER key. The LCD displays:
4. Station C presses PRIVACY key again.
5. Station A receives ringback tone, and the LCD displays:
6. A 4-party call is established. The line appearance will flash, indicating I-USE [I-8], and the LED of
PRIVACY key will be turned off. The LCDs of the associated D
terms display:
By following the operations described...

NEAX2400 IMX Feature Programming Manual
Page 574ND-70184 (E), Issue 3
P-18 Privacy Release
Service Conditions (cont’d)
10. When a station tries to bridge into a call and presses the line appearance, and when PRIVACY RELEASE
is not available because of the lack of an 8-party conference trunk, the LCD displays as follows, indicating
that PRIVACY RELEASE is not available:
11. PRIVACY RELEASE is not available when another station is in the process of entering a multiple-party
call (when receiving ringback...

NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 575
Privacy Release P-18
Service Conditions (cont’d)
f.) While engaged in a multiple-party call, the user presses the line appearance of a busy station. 
g.) While engaged in calling a station by INTERCOM [I-9] call or Intercom Bridge call, the station
presses the line appearance of busy station. 
h.) After placing a call on CONSULTATION HOLD [H-17], the station originates a call to a station
or trunk and then presses the line appearance...

NEAX2400 IMX Feature Programming Manual
Page 576ND-70184 (E), Issue 3
P-18 Privacy Release
Programming
STEP 1:ASYD - System Data 1, Index 17, BIT 2. Is PRIVACY RELEASE service to be enabled? 0/1: No/Yes.
Assign data 1. 
System Data 1, Index 17, BIT 3. Is an Interrupt tone for PRIVACY RELEASE to be enabled? 0/1: No/
Ye s .  
System Data 1, Index 17, BIT 6. Is Line Privacy Expansion service to be enabled? 0/1: No/Yes. Assign
data 1. 
System Data 1, Index 17, BIT 7, Bridge Call 0/1: Privacy/Non-Privacy...