NEC Neax 2400 Imx Callcenterworx Enterprise Acd System Manual

CHAPTER 7 NDA-24282
Pag e 3 52
Revision 1.0
AKYD: ASSIGNMENT OF KEY DATA FOR DTERM
Dterm Key Data Programming Sheet (1/2)
MY LINE
TENANT
NUMBER
(TN)STATION NUMBER
(STN)
PRIORITY
OF
ANSWERING
CALL
(PRI)
0-4PRIME LINE
ALLOW 
OG
FROM
PRIME
LINE
(S)
0/1MESSAGE
WAITING
DATA
DISPLAY
SELECTION
(MWD)
0/1LINE
PREFERENCE
(LN PRE)
0/1LINE
PREFERENCE
FOR SPEAKER
BUTTON
(SPK)
0-3LINE
PREFERENCE
FOR ANSWER
BUTTON
(ANS)
0-2LINE
PREFER-
ENCE
FOR OUTGO-
ING
BUTTON
(ORG)
0/1TYPE OF
DTERM
(TP)
0-3 TENANT
NUMBER
(PL...

NDA-24282 CHAPTER 7
Page 353
Revision 1.0
AKYD: ASSIGNMENT OF KEY DATA FOR DTERM
Dterm Key Data Programming Sheet (2/2)
Note 1:
When KYI=0 (None), it is not necessary to assign any data.
When KYI=1 (FUNCTION), assign data for FKY only.
When KYI=2 (Multi-Line), assign data for multiple telephone only.
KEY
NUM-
BER
(KYN)SERVICE
CONDITION
(KYI) 
0 – 2FEATURE
KEY CODE
(FKY)
1-320KIND OF
LINE
(KD)
0-2MULTI LINE INTERCOM
TENANT
NUMBER
(TN)STATION
NUMBER
(STN)RING
INFORMATION
FOR
EACH LINE
(RG)
0-7KIND OF...

CHAPTER 7 NDA-24282 (E)
Pag e 3 54
Revision 1.0
AMNO: Assignment of Monitored Number
AMNO: Assignment of Monitored Number
1. Function
AMNO is used to assign monitored numbers into the PBX database. The numbers programmed in AMNO
will also be programmed into ACDPLT (the ACD database). The monitored numbers programmed in
AMNO are the entry points for pilot numbers into the ACD system.
2. Precautions
1. When the monitored number (MNO) is deleted, delete MNO in ACDPLT prior to this command.
2. When UCD=1 is...

NDA-24282 (E) CHAPTER 7
Page 355
Revision 1.0
AMNO: Assignment of Monitored Number
Monitored Number Data Programming Sheet
TENANT
NUMBER
(TN)
1 ~ 10MONITORED
NUMBER
(MNO)NUMBER MONITORED
INDEX (NMI) 
1 ~ 4095UCD DEGRADE 
(UCD)
0/1UCD CONTROL
STATION NUMBER
(STN)ADMIN./
GUEST
(A/G)
A/G 

CHAPTER 7 NDA-24282 (E)
Pag e 3 56
Revision 1.0
AMNOL: Assignment of Monitored Number for LDM
AMNOL: Assignment of Monitored Number for LDM
1. Function
AMNOL is used to assign monitored numbers into the PBX database. The numbers programmed in
AMNOL will also be programmed into ACDPLT (the ACD database). The monitored numbers
programmed in AMNOL are the entry points for pilot numbers into the ACD service to be activated over
FCCS. The monitored number programmed in AMNOL is available for only the self...

NDA-24282 (E) CHAPTER 7
Page 357
Revision 1.0
AMNOL: Assignment of Monitored Number for LDM
Monitored Number Data (LDM) Programming Sheet
USER
GROUP
NUMBER
(UGN)LOCAL
MONITORED
NUMBER
(L_MNO)
MAX. 5 DIGITSLOCAL NUMBER
MONITORED
INDEX (L_NMI)
1 ~ 4095UCD DEGRADE
(UCD)
0/1UCD CONTROL
TELN NUMBER
(TELN)
MAX. 5 DIGITSADMIN./
GUEST
(A/G)
A/G 

CHAPTER 7 NDA-24282 (E)
Pag e 3 58
Revision 1.0
AMNON: Assignment of Monitored Number for NDM
AMNON: Assignment of Monitored Number for NDM
1. Function
AMNON is used to assign monitored numbers into the PBX database. The numbers programmed in
AMNON will also be programmed into ACDPLT (the ACD database). The monitored numbers
programmed in AMNON are the entry points for pilot numbers into the ACD service to be activated over
FCCS. The monitored number programmed in AMNON is available for all nodes within...

NDA-24282 (E) CHAPTER 7
Page 359
Revision 1.0
AMNON: Assignment of Monitored Number for NDM
Monitored Number Data (NDM) Programming Sheet
USER
GROUP
NUMBER
(UGN)NETWORK
MONITORED
NUMBER
(N_MNO)
MAX. 5 DIGITSNETWORK
NUMBER
MONITORED
INDEX (N_NMI)
1 ~ 4095UCD DEGRADE
(UCD)
0/1UCD CONTROL
TELEPHONE
NUMBER
(TELN)
MAX. 5 DIGITSADMIN./
GUEST
(A/G)
A/G 

CHAPTER 7 NDA-24282 (E)
Pag e 3 60
Revision 1.0
ACNO: Assignment of Conversion Number Data
ACNO: Assignment of Conversion Number Data
1. Function
ACNO is used to direct a specified ringdown type t runk route to a specific monitored number (monitored
number is the same as a pilot number).
Note:This command does not apply to self-directing type trunks (i.e. DID, TIE Lines, etc.).
2. Precautions
1. Prior to this command, program the monitored number by AMNO and ACDPLT.
2. Do not program the Direct  in...

NDA-24282 (E) CHAPTER 7
Page 361
Revision 1.0
ACNO: Assignment of Conversion Number Data
Conversion Number Data Programming Sheet
ROUTE NUMBER
(RT)
1 ~ 255TENANT NUMBER
(TN)
1 ~ 10MONITORED NUMBER
(MNO)
Max. 5 digits