NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 461
Station Hunting - Circular S-7
Service Conditions (cont’d)
16. This feature will be activated whenever the hunt group is dialed or terminated under the following
conditions:
a.) dialed from a station
b.) dialed from ATTENDANT CONSOLE [A-3]
c.) dialed from DID [D-8]
d.) dialed from TIE LINE [T-3]
e.) terminated by DIT [D-7]
f.) terminated by HOT LINE [H-1]
g.) terminated by OFF-HOOK ALARM [O-6]
h.) terminated by PRIORITY CALL...

NEAX2400 IMX Business Features and Specifications
Page 462NDA-24221, Issue 3
S-7 Station Hunting - Circular
Service Conditions (cont’d)
22. The incoming call terminated through FCCS link to the Station Hunt group, which is programmed by the
Physical Station Number, is not hunted. 
23. When a Physical Station Number and telephone number assigned to a Circular Hunt station are identical,
priority is attached to STATION HUNTING - CIRCULAR via FCCS.
24. When using this feature within an FCCS network, when...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 463
Station Hunting - Circular S-7
Service Conditions (cont’d)
32. The following are the conditions when STATION HUNTING - CIRCULAR is programmed on LDM.
a.) When a call is directly placed to a Circular Hunt station, CALL FORWARDING - ALL CALLS
[C-5] is normally activated (the call is forwarded to the designated station).
b.) When a call to a Circular Hunt Station is forwarded by CALL FORWARDING - BUSY LINE
[C-2] and the forwarded...

NEAX2400 IMX Business Features and Specifications
Page 464NDA-24221, Issue 3
S-7 Station Hunting - Circular
Interactions (cont’d)
b.) A direct call to Station A will respond to CALL FORWARDING-BUSY LINE [C-2].
c.) A call to the Station Hunting-Circular group will bypass Station A, if that station is both busy and
has set CALL FORWARDING-BUSY LINE [C-2]. The next station in the group will ring.
d.) A call forwarding-override call from Station B to Station A will hunt if Station A is busy.
5. STATION...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 465
Station Hunting - Secretarial S-8
S-8  Station Hunting - Secretarial
General Description
This feature allows calls to a Hunt group to forward to a secretarial station when all the stations in the group are busy.
Operating Procedure
No manual operation is required.
Service Conditions 
1. When all stations within a Hunt group are busy, the incoming call is routed to the station programmed as
the Secretarial Station. 
2. If the...

NEAX2400 IMX Business Features and Specifications
Page 466NDA-24221, Issue 3
S-9 Station Hunting - Terminal
S-9  Station Hunting - Terminal
General Description
This feature enables calls placed to busy stations, other than Pilot stations of a Hunt group, to receive a busy tone
rather than proceed through the normal hunting process. However, if the call is placed to the busy Pilot station of a
Hunt group, station hunting will proceed as usual.
Operating Procedure
No manual operation is required.
Service...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 467
Station Hunting - Terminal S-9
Service Conditions (cont’d)
d.) A station can belong to one hunting group only; it cannot belong to another group including that
for STATION HUNTING - CIRCULAR [S-7] or UNIFORM CALL DISTRIBUTION (UCD)
[U-1].
e.) When all stations to be hunted are busy, the incoming call is forwarded finally to the Secretarial
Station. However, when the station is not assigned or is also busy, busy tone is provided...

NEAX2400 IMX Business Features and Specifications
Page 468NDA-24221, Issue 3
S-9 Station Hunting - Terminal
Service Conditions (cont’d)
18. The number of the Hunt Group is unlimited.
19. When all the stations in a Hunt Group are busy:
a.) If a call is directed to a station belonging to a group that has no Secretarial Station, the caller will
hear busy tone.
b.) If a call is directed to a station belonging to a group that has a Secretarial Station, the call will be
forwarded to the Secretarial Station....

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 469
Station Hunting - Terminal S-9
Service Conditions (cont’d)
27. When activating this feature via the FCCS network, when CALL FORWARDING - BUSY LINE [C-2]
or CALL FORWARDING - ALL CALLS [C-5] has been set to a member station and the station is busy,
the station is skipped.
28. When activating this feature via the FCCS network, CALL FORWARDING - DON’T ANSWER [C-3],
will respond to both pilot and non-pilot stations.
29. When...

NEAX2400 IMX Business Features and Specifications
Page 470NDA-24221, Issue 3
S-9 Station Hunting - Terminal
Interactions (cont’d)
5. CALL FORWARDING-BUSY LINE/DON’T ANSWER [C-2, 3]: If Station A is in a STATION
HUNTING-TERMINAL group and not the Pilot station, it will activate CALL FORWARDING-BUSY
LINE/DON’T ANSWER to Station B:
a.) Any call to Station A will respond to CALL FORWARDING-DON’T ANSWER [C-3]. 
b.) A direct call to Station A will respond to CALL FORWARDING-BUSY LINE [C-2]. 
c.) A call to the...