NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 491
Speed Calling - Group S-23
S-23  Speed Calling - Group
General Description
This feature allows a user to share a set of common Speed Calling numbers with other users in the group.
Operating Procedure
To record: 
1. Lift handset or press SPEAKER key; receive dial tone.
2. Dial the SPEED CALLING access code (one to three digits).
3. Dial the abbreviated call code (one to three digits) and the called exchange network numbers;...

NEAX2400 IMX Business Features and Specifications
Page 492NDA-24221, Issue 3
S-23 Speed Calling - Group
Service Conditions (cont’d)
10. SPEED CALLING-GROUP and SPEED CALLING-STATION [S-21] use the same block of memory
tables. 
11. SPEED CALLING-GROUP data remains, even if the system is re-initialized or there is a power failure.
12. A pause may be programmed using the “
*” button of a PB pad. This will take one of the 24 digits
available. Rotary type phones cannot store a pause. A pause lasts 2.8...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 493
Save And Repeat - DtermS-24D
S-24D Save And Repeat - Dterm
General Description
This feature allows for a Dterm set to save a specific dialed number and then redial that number later.
Operating Procedure
1. Go off-hook, seize any idle line, and dial a number.
2. When the number has been dialed, press the SAVE AND REPEAT (S&R) feature key. The dialed number
is stored for future use. The associated LED lights. The LCD displays:...

NEAX2400 IMX Business Features and Specifications
Page 494NDA-24221, Issue 3
S-25D Service Display - Dterm
S-25D  Service Display - Dterm
General Description
This feature generates LCD displays corresponding to the various features as they are initiated.
Operating Procedure
Each display is automatically generated when a feature is initiated. 
Service Conditions 
1. Each display is controlled by System Data and is produced accordingly. The service display may be
allowed or denied in System Data on a...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 495
Speed Calling - One Touch - DtermS-26D
S-26D  Speed Calling - One Touch - Dterm
General Description
This feature allows Dterm users to dial telephone numbers by pressing a single key. Up to 12/24 numbers may be
programmed by the Dterm user. 
Operating Procedure
To program: 
1. Press the FEATURE key.
2. Press the SPEED CALLING-ONE TOUCH button. 
3. Dial the desired number.
4. Press the FEATURE key again.
5. Display will show...

NEAX2400 IMX Business Features and Specifications
Page 496NDA-24221, Issue 3
S-26D Speed Calling - One Touch - Dterm
Service Conditions (cont’d)
10. FLASH ENTRY and VOICE CALL features may be combined on a SPEED CALLING-ONE TOUCH
key to activate an automatic voice-announce transfer. To program, press the SPEED CALLING-ONE
TOUCH key, press the RECALL key, dial the number, press the TRANSFER key, then press the SPEED
CALLING-ONE TOUCH key. 
11. A PAGE CHANGEOVER key must be assigned to a programmable...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 497
Service Feature Peg Count S-27
S-27  Service Feature Peg Count
General Description
This feature provides a statistical usage report on various features, generated at the MAINTENANCE
ADMINISTRATION TERMINAL (MAT) [M-18]. This report will provide the Communications Manager with
detailed users’ habits and planning data for the communications system.
Operating Procedure
Refer to NEAX2400 IMX System Operations and Maintenance...

NEAX2400 IMX Business Features and Specifications
Page 498NDA-24221, Issue 3
S-27 Service Feature Peg Count
Service Conditions (cont’d)
17. SPEED CALLING ACCESS-GROUP [S-23] count: Number of times a variable abbreviated number is
registered by stations for which the feature is allowed. 
18. TRUNK ANSWER FROM ANY STATION (TAS) [T-8] count: Number of times the TAS Answer code
is dialed by stations for which the feature is allowed.
19. OFF-HOOK QUEUING [O-7] count: Number of times an extension accesses an...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 499
Software Line Appearance S-33
S-33 Software Line Appearance
General Description
This feature permits ports that do not physically exist to be used as sub-lines on Dterm stations. Ports normally
reserved on a Dterm for data stations only, can be assigned as a SOFTWARE LINE APPEARANCE. Additionally,
64 software ports have been added to a Port Interface Module. The 64 software-assigned ports can be assigned as
virtual line...

NEAX2400 IMX Business Features and Specifications
Page 500NDA-24221, Issue 3
S-61 Speed Calling Override - System
S-61  Speed Calling Override - System
General Description
This feature allows numbers programmed for SPEED CALLING to be available to stations on a system-wide basis,
determined by Service Feature Class (SFC). For example, SPEED CALLING-SYSTEM [S-3] numbers, available
to stations that are not restricted, can be made available to stations that are restricted.
Operating Procedure
To operate:
1....