NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 531
Tenant Service T-12
Interactions (cont’d)
5. CALL FORWARDING [C-2, 3, 5]: When a station call forwards to the Attendant Console, the call will
go to the originating station’s Attendant Console, as assigned via the Tenant parameter of the ATRK
command.
6. CLASS OF SERVICE-INDIVIDUAL [C-15]: Refer to the programming section. This feature affects the
construction of all classes of service. 

NEAX2400 IMX Business Features and Specifications
Page 532NDA-24221, Issue 3
T-18D Time Display - Dterm
T-18D  Time Display - Dterm
General Description
This feature provides a digital time display on a Dterm’s LCD.
Operating Procedure
No manual operation is required.
Service Conditions 
1. The time is displayed according to the clock in the PBX and is set via the MAINTENANCE
ADMINISTRATION TERMINAL (MAT) [M-18]. 
2. Time is displayed automatically:
3. Time is constantly displayed on the center line of...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 533
Trunk Line Appearance T-23
T-23 Trunk Line Appearance
General Description
This feature allows a Dterm user to directly access a Central Office trunk or TIE Line without dialing an access code.
Incoming calls can also be answered at the TRUNK LINE APPEARANCE [T-23].
Operating Procedure
To access an outgoing trunk:
1. Press the TRUNK LINE APPEARANCE line/feature key. 
2. Lift the handset or press the SPEAKER key. Central Office...

NEAX2400 IMX Business Features and Specifications
Page 534NDA-24221, Issue 3
T-28 Trunk-to-Trunk Third-Party Cancellation
T-28 Trunk-to-Trunk Third-Party Cancellation
General Description
This feature allows a station to cancel an active trunk-to-trunk connection (during a three-way-connection) and
return to the original call.
Operating Procedure
If a station is presently engaged in a call with another station or with a trunk party: 
1. Switch hook flash; receive special dial tone.
2. Dial a trunk access...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 535
Timed Reminder T-62
T-62 Timed Reminder 
General Description
This feature allows a user to set a Timed Reminder call from the station. The system calls up the station at the
designated time. When the station answers the call, the user hears a message or Music-On-Hold.
Operating Procedure
To set a Timed Reminder call:
1. Lift a handset; receive dial tone.
2. Dial the Timed Reminder (SET) access code.
3. Designate your desired...

NEAX2400 IMX Business Features and Specifications
Page 536NDA-24221, Issue 3
T-63 Tone Block
T-63 Tone Block
General Description
This feature allows the user of a station (via analog adapter) or an analog station (PB) to restrict any call. This
prevents interruption of data transmission, before the connection.
Operating Procedure
To set the service: 
1. Lift the handset: receive the dial tone.
2. Dial the access code of “Data Privacy on Demand; Entry”.
3. Hear the special dial tone or the dial tone...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 537
Uniform Call Distribution (UCD) U-1
U-1 Uniform Call Distribution (UCD)
General Description
This feature distributes incoming calls to a UCD group of up to 100 stations. Calls are distributed to idle stations in
a circular pattern, in the order in which they arrive.
Operating Procedure
To transfer a call to a busy UCD group:
1. All the stations in a UCD group are busy.
2. A user not in the group answers an incoming call (trunk...

NEAX2400 IMX Business Features and Specifications
Page 538NDA-24221, Issue 3
U-1 Uniform Call Distribution (UCD)
Service Conditions (cont’d)
12. If CALL FORWARDING-ALL CALLS [C-5] is set on a controlling station and the destination station is
idle, a call to the UCD group is transferred. If the designated station is busy, the user will hear busy tone. 
13. If CALL FORWARDING-ALL CALLS [C-5] is set on a non-controlling station, that station is skipped
in any UCD hunt. 
14. The Attendant can use BUSY...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 539
Uniform Call Distribution (UCD) U-1
Service Conditions (cont’d)
Example:
c.) UCD station peg count:
 Count of incoming calls to each station in each group 
 Count of answered calls 
 Count of other calls (abandoned, restricted, blocked) 
Example:
22. UCD Peg counts are available for calls transferred to the UCD group by the Attendant and for calls
transferred to the UCD group from a station.
23. The total numbers of incoming...

NEAX2400 IMX Business Features and Specifications
Page 540NDA-24221, Issue 3
U-1 Uniform Call Distribution (UCD)
Service Conditions (cont’d)
31. This feature is available via FCCS link.
32. A UCD Group for FCCS service is not available for the destination of the dead level or the dead number.
33. The following number is assignable to a station of the UCD group.
a.) Physical Station Number (Physical Station Number, Phantom Number, Monitored Number [Pilot
No.], DTE station)
b.) Telephone number
34. When...