NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 451
Route Name Display R-51
R-51  Route Name Display
General Description
This feature allows a user to assign a desired trunk type for a route by the system data. The assigned trunk type
(maximum of 4 or 8 digits) is displayed on the upper line of Dterm LCD.
 4-digit display
TK No.
 8-digit display
Note:Trunk type, which can be changed by system data.
Operating Procedure
No manual operation is required.
Service Conditions
1....

NEAX2400 IMX Business Features and Specifications
Page 452NDA-24221, Issue 3
R-51 Route Name Display
Service Conditions (cont’d)
 8-digit display
8. This feature is available when the D
term user presses the call terminating sub line. This feature is also
available when the user presses the held sub line after holding a call using the HOLD key.
9. For data assignment to each of NDM (Network Data Memory) and LDM (Local Data Memory), different
commands can be used. However, the data in NDM has a priority....

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 453
Single-Digit Station Calling S-1
S-1 Single-Digit Station Calling
General Description
This feature allows the assignment of single digits for station numbers.
Operating Procedure
1. Lift the handset; receive dial tone.
2. Dial the Single-digit (preprogrammed) telephone number.
3. The desired service station will be rung. 
Service Conditions
1. The single-digit number must be different from the first digit of trunk access codes,...

NEAX2400 IMX Business Features and Specifications
Page 454NDA-24221, Issue 3
S-2 Special Dial Tone
S-2  Special Dial Tone
General Description
This feature provides a distinctive dial tone to a user after the switch hook has been pressed, enabling the user to
activate a specific service feature.
Operating Procedure
1. While connected with the first party, user presses the switch hook; receives SPECIAL DIAL TONE.
2. User may activate a service feature, such as: 
CALL HOLD [C-6] 
CALL TRANSFER-ALL CALLS...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 455
Speed Calling - System S-3
S-3 Speed Calling - System
General Description
This feature allows a user or ATTENDANT CONSOLE [A-3] to call frequently dialed numbers using fewer digits
(abbreviated call codes) than would normally be required.
Operating Procedure
1. Lift handset; receive dial tone,
2. Dial SPEED CALLING - SYSTEM access code (maximum three digits), or press D
term Speed Calling
key.
3. Dial abbreviated call code...

NEAX2400 IMX Business Features and Specifications
Page 456NDA-24221, Issue 3
S-3D Speed Calling - System - Dterm
S-3D  Speed Calling - System - Dterm
General Description
This feature allows a Dterm user to call frequently dialed numbers using fewer digits (abbreviated call codes) than
would normally be required.
Operating Procedure
Originating a call from a Dterm:
1. Press the SPEED CALLING-SYSTEM (SPEED-SYS) key. 
2. Dial the abbreviated call code (maximum of four digits). The LCD displays:
3. The call...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 457
Splitting S-4
S-4 Splitting
General Description
This feature allows the ATTENDANT CONSOLE [A-3] to speak privately with one party on an Attendant-handled
connection without the other party overhearing.
Operating Procedure
To speak with the called party only:
1. Dial the desired telephone number.
2. Station class/telephone number is displayed.
3. Wait for the party to answer.
To speak with the calling party only: 
1. Press the...

NEAX2400 IMX Business Features and Specifications
Page 458NDA-24221, Issue 3
S-4D Splitting - Dterm
S-4D  Splitting - Dterm
General Description
This feature allows a Dterm user to alternately converse between two separate parties while one party is connected
and one party remains on hold. The user uses the TRANSFER button to alternate conversations between the two
parties.
Operating Procedure
While a conversation is in progress:
1. Press the TRANSFER key; hear special dial tone. 
2. Dial the new number;...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 459
Station-Controlled Conference S-6
S-6 Station-Controlled Conference
General Description
This feature allows any NEAX2400 IMX station to establish a conference. The conference may be any combination
of stations and/or trunks (inside and outside parties).
Operating Procedure
Procedure 1 (MEET-ME CONFERENCE):
1. User wishing to establish the conference (conference leader) calls each party desired and advises them of
the...

NEAX2400 IMX Business Features and Specifications
Page 460NDA-24221, Issue 3
S-7 Station Hunting - Circular
S-7 Station Hunting - Circular
General Description
This feature permits a call to be processed automatically through a hunt group of busy extensions, in a programmed
order.
Operating Procedure
No manual operation is required.
Service Conditions 
1. This feature can be activated via FCCS.
2. When all stations within a Circular Hunt Group are busy:
a.) If a call is terminated to a group does not have...