NEC Neax 2400 Imx Business Features And Specifications

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 431
Priority Paging P-30
Service Conditions (cont’d)
12. Forced release of a Paging Trunk is processed so that the station connected with that specific Paging Trunk
is regarded as having released. Therefore, after the forced release of the paging trunk, the state of the
station is as follows:
a.) if there is a call on hold: Dial Tone Connection
b.) if there is no call on hold: Recall (Calling Only) 
(Answering - Non-Delay)
Dial...

NEAX2400 IMX Business Features and Specifications
Page 432NDA-24221, Issue 3
P-57 Pad Lock
P-57 Pad Lock
General Description
This feature temporarily restricts telephones from making unauthorized calls by dialing a special access code when
users are away from their seats.
Operating Procedure
To set PAD LOCK from the station:
1. Lift the handset and receive dial tone.
2. Dial PAD LOCK access code and receive special dial tone.
3. Dial Authorization Code and receive service set tone.
4. Restore the...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 433
Personal Ringer P-59
P-59 Personal Ringer
General Description
This feature provides another ringer pattern for the call terminating to the personal number and allows the user to
distinguish the called number upon hearing ringing.
Ringing patterns are as follows:
 Ringing Pattern A: used for an incoming call from Central Office to the individual number.
 Ringer pattern B: used for an incoming call from a station or TIE Line...

NEAX2400 IMX Business Features and Specifications
Page 434NDA-24221, Issue 3
R-2 Remote Access to System
R-2 Remote Access to System
General Description
This feature allows a user outside the NEAX2400 IMX to access the system via an exchange network connection
without Attendant or station assistance. The outside user may originate calls over any or all of the PBX facilities,
such as WATS, FX, TIE Line or CCSA.
When a wrong code is received from a station/trunk, detailed information on the unauthorized...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 435
Remote Access to System R-2
Interactions
1. The Authorization Code used in conjunction with REMOTE ACCESS TO SYSTEM will not be recorded
in SMDR. System Data 2, Index 3, bit 5 is the only difference between Forced Account Code and
Authorization code. This Bit determines where the dialed code will appear in SMDR. When assigned as
Authorization code, those digits will not appear in SMDR.
2. The additional step of the ARAC...

NEAX2400 IMX Business Features and Specifications
Page 436NDA-24221, Issue 3
R-3 Reserve Power
R-3 Reserve Power
General Description
This feature provides a system with a backup power supply, functioning from a battery source, in the event of a
commercial power failure.
Operating Procedure
Power is automatically supplied to the NEAX2400 IMX in the event of a commercial power failure.
Service Conditions
1. Batteries should be installed separate from the NEAX2400 IMX.
2. Batteries and chargers are not NEC...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 437
Restriction from Outgoing Calls R-4
R-4 Restriction from Outgoing Calls
General Description
This feature automatically denies preselected station lines within the NEAX2400 IMX system the ability to place
outgoing calls and/or certain miscellaneous trunk calls without Attendant assistance.
Operating Procedure
Operation is fully automatic that the restricted stations will receive reorder tone upon attempting to place a...

NEAX2400 IMX Business Features and Specifications
Page 438NDA-24221, Issue 3
R-4 Restriction from Outgoing Calls
Interactions (cont’d)
3. CONSULTATION HOLD [C-17]: Station A may consult with station B when Route 1 is on Soft Hold. 
4. THREE-WAY CALLING [T-2]: Station A cannot include restricted Station B in a Tree-Way Calling
connection with Route 1.
5. DAY/NIGHT CLASS OF SERVICE [D-15]: Restricted Station B may be allowed access to Route 1 when
the system is placed in the NIGHT mode. See DAY/NIGHT CLASS...

NEAX2400 IMX Business Features and Specifications
NDA-24221, Issue 3
Page 439
Rotary Dial Calling R-5
R-5 Rotary Dial Calling
General Description
This feature permits users to originate calls over rotary or push-button lines using Rotary Dial telephones.
Operating Procedure
Users dial rotary telephones in the normal fashion.
Service Conditions
1. Rotary dial telephones installed should be industry standard 10pps instruments.
2. Pushbutton instruments may be used in conjunction with ROTARY DIAL CALLING....

NEAX2400 IMX Business Features and Specifications
Page 440NDA-24221, Issue 3
R-6 Route Advance
R-6 Route Advance
General Description
This feature automatically routes outgoing calls over alternate facilities when the first-choice trunk group is busy.
User selects the first-choice route by dialing the corresponding access code, and the equipment then advances
through alternate trunk groups only if the first choice is busy.
Operating Procedure
No manual operation is required.
Service Conditions
1. No...