NEC Ds2000 Software Instructions Manual

0500 - System Numbering
0505 - Extension Assignment (U Slot and DS1000)
DS1000/2000 Software Manual Chapter 2: Programming483
Telephone Programming Instructions
DS2000 U SLOT
1. Enter the programming mode.
2. 0505 + 
HOLD
3. Enter the Main Equipment Cabinet slot number (1-8) for the trunk (401-448) or extension 
(300-395) you want to view + 
HOLD.
The first line of the display shows the slot you selected.
4. For the slot selected, enter the number of the port (circuit) you want to change + 
HOLD.
For...

0500 - System Numbering
0505 - Extension Assignment (U Slot and DS1000)
484Chapter 2: ProgrammingDS1000/2000 Software Manual
4. Enter the port number for the device you want to view. For example,
- For extension 302, enter 2.
- For trunk 4, enter 4.
- For the second Analog Door Box, enter 2.
Note that each device type (extension, trunk, or Analog Door Box) has its own set of 
port numbers.
5. Press 
HOLD. The currently assigned extension number for the port selected displays. If you 
selected an...

0500 - System Numbering
0510 - ACD/UCD Master Extension Numbers and Names
DS1000/2000 Software Manual Chapter 2: Programming485
0510 - ACD/UCD Master Extension Numbers and Names
Description
Use Program 0510- ACD/UCD Master Extension Numbers and Names to assign extension 
numbers and names to the ACD/UCD master extensions. The system can have up to eight ACD/
UCD groups (1-8). The extension numbers you enter must be unique and cannot be a physical port 
(e.g., 300).
Conditions
NoneDS2000 Fixed Slot...

0500 - System Numbering
0510 - ACD/UCD Master Extension Numbers and Names
486Chapter 2: ProgrammingDS1000/2000 Software Manual
Telephone Programming Instructions
1. Enter the programming mode.
2. 0510 + 
HOLD
3. Enter the number of the group you want to program (1-8) + HOLD.
The previously programmed extension number displays.
4. Enter the number of the extension you want assigned to the group.
OR
Press 
HOLD to leave the entry unchanged.
The previously programmed name displays.
5. Enter the name for...

0500 - System Numbering
0511 - Ring Group Master Extension Numbers and Names
DS1000/2000 Software Manual Chapter 2: Programming487
0511 - Ring Group Master Extension Numbers and Names
Description
Use Program 0511- Ring Group Master Extension Numbers and Names to assign extension 
numbers and names to the Ring Group master extensions. The system can have up to eight Ring 
Groups (1-8). The extension numbers you enter must be unique and not overlap extension numbers 
used for trunks, extensions, or...

0500 - System Numbering
0511 - Ring Group Master Extension Numbers and Names
488Chapter 2: ProgrammingDS1000/2000 Software Manual
4. Enter the number of the extension you want assigned to the group.
OR
Press 
HOLD to leave the entry unchanged.
The previously programmed name displays.
5. Enter the name for the group (10 character maximum) + 
HOLD
OR
Press 
HOLD to leave the displayed name unchanged.
6. Return to step 3 and enter another group.
OR
Press 
HOLD to return to step 2 and enter another program...

0600 - Toll Restriction
0601 - Toll Restriction Options
DS1000/2000 Software Manual Chapter 2: Programming489
0600 - Toll Restriction
0601 - Toll Restriction Options
Description
Use Program 0601- Toll Restriction Options to assign Toll Restriction options to each of the 
seven Toll Levels (1-7). When you assign a Toll Level to an extension, the extension uses the 
options set up in this program. 
Conditions
NoneDS2000 Fixed Slot
Not available. DS2000 U Slot
DS1000
Table 34:  Program 0601 - Toll...

0600 - Toll Restriction
0601 - Toll Restriction Options
490Chapter 2: ProgrammingDS1000/2000 Software Manual
0 + DialingUse this option to enable or disable an exten-
sion’s ability to manually dial 0 + (operator 
assisted) calls.
• See Toll Restriction on page 385 for 
more.0 + DIALING?Y = Enable
N = DisableY
International DialingUse this option to enable or disable 011 
(international) dialing.
• See Toll Restriction on page 385 for 
more.INT’L DIAL?Y = Enable
N = DisableY
Equal Access DialingThis...

0600 - Toll Restriction
0601 - Toll Restriction Options
DS1000/2000 Software Manual Chapter 2: Programming491
Telephone Programming Instructions
To quickly locate the procedure for a Toll Restriction option, go to the steps listed below:
To select the Toll Level you want to program, go to step 4.
To enable or disable Active Dial Pad, go to step 5.
If setting up N11 Dialing, go to step 6.
When enabling or disabling 0+ Dialing, go to step 7.
For International Dialing options, go to step 8.
When...

0600 - Toll Restriction
0601 - Toll Restriction Options
492Chapter 2: ProgrammingDS1000/2000 Software Manual
1. Enter the programming mode.
2. 0601 + 
HOLD.
3. Enter P (7) to program Toll Restriction and go to the next step.
OR
Enter I (4) + 
HOLD to initialize Toll Restriction and return to the previous step.
You must always initialize Toll Restriction when programming it for the first time. If 
you initialize an existing Toll Restriction setup, you’ll return all your programmed entries 
to their...