NEC Ds2000 Software Instructions Manual
Here you can view all the pages of manual NEC Ds2000 Software Instructions Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 541
1800 - Extension Options 1801 - Extension Port Description DS1000/2000 Software Manual Chapter 2: Programming533 DSS TypeUse this option to specify the type of DSS Console plugged into the telephone (1 = 24- button, 2 = 110-button, 0 = unassigned). You cannot install more than 4 DSS Consoles. • See Direct Station Selection (DSS) Con- sole on page 128 for more.DSS TYP?0 = Uninstalled 1 = 24-Button 2 = 110 Button300 = 1 301-331 = 0 DSS Block NumberUse this option to assign a DSS block to the console. •...
Page 542
1800 - Extension Options 1801 - Extension Port Description 534Chapter 2: ProgrammingDS1000/2000 Software Manual Extension Toll Level NightUse this option to assign an extension’s Toll Level during the night mode. • See Toll Restriction on page 385 for more.STA TOLL LVL NITE?1-7, 0 = No restriction00 DCI Class of Service Assignment• This option is currently not used. DCI COS?1=151 DCI Toll Level Day• This option is currently not used. DCI TOLL LVL DAY?1-7, 0 = No restriction1 DCI Toll Level Night•...
Page 543
1800 - Extension Options 1801 - Extension Port Description DS1000/2000 Software Manual Chapter 2: Programming535 Telephone Programming Instructions 1. Enter the programming mode. 2. 1801 + HOLD 3. Enter the number of the extension you want to program (300-395) + HOLD OR Press HOLD to select extension 300. The previously programmed value displays. See the chart above for valid circuit types. 4. Enter the new station circuit type + VO L OR Press VO L to leave the current circuit type unchanged....
Page 544
1800 - Extension Options 1801 - Extension Port Description 536Chapter 2: ProgrammingDS1000/2000 Software Manual If you already have 4 DSS Consoles installed, and you try to install a 5th, you see the message: TABLE FULL. You cannot install more than 4 DSS Consoles. 9. If installed, enter the DSS Console type (00-02) + VO L OR Press VO L to leave the current entry unchanged 10. If installed, enter the DSS Console block number (if installed) + VO L OR Press VO L to leave the current entry...
Page 545
1800 - Extension Options 1801 - Extension Port Description DS1000/2000 Software Manual Chapter 2: Programming537 The previously programmed value displays. 17. For 3DCI Modules, enter the module’s night mode Toll Level (1-7, 0 = No restriction) + VO L OR Press VO L to leave the current entry unchanged The previously programmed value displays. 18. Enter the extension’s Access Level (0-5) + VO L OR Press VO L to leave the current entry unchanged The previously programmed value displays. 19....
Page 546
1800 - Extension Options 1801 - Extension Port Description 538Chapter 2: ProgrammingDS1000/2000 Software Manual The previously programmed value displays. 24. Press CONF to select another station port to program. OR Press CONF twice to exit this program.
Page 547
1800 - Extension Options 1802 - Extension Options (Part 1) DS1000/2000 Software Manual Chapter 2: Programming539 1802 - Extension Options (Part 1) Description Use Program 1802 - Extension Options (Part 1) to set up additional options for extensions. Also see Program 1801 - Extension Port Description on page 532 and Program 1807 - Extension Options (Part 2) on page 553. Note: If you are doing extensive programming, you may find Program 9801 - Copy Command (page 557) saves you time when customizing this...
Page 548
1800 - Extension Options 1802 - Extension Options (Part 1) 540Chapter 2: ProgrammingDS1000/2000 Software Manual Off-Hook Signaling for CO CallsUse this option to assign an extension’s Off- Hook Signaling options for trunk calls. • See Attendant Position on page 46 for more. • See Central Office Calls, Answering on page 87 for more. • See Off-Hook Signaling on page 270 for more.OHS CO?0 = No Off-Hook Signaling 1 = Camp On tone 2 = Off hook ringing1 Handsfree Reply on Intercom CallsUse this option to...
Page 549
1800 - Extension Options 1802 - Extension Options (Part 1) DS1000/2000 Software Manual Chapter 2: Programming541 Telephone Programming Instructions 1. Enter the programming mode. Key Access to Outbound LinesUse this option to enable or disable the extension user’s ability to press a Program- mable Function Key to access and outside line. • See Central Office Calls, Placing on page 93 for more. • See Line Keys on page 238 for more. • See Programmable Function Keys on page 304 for more.KEY ACESS TO...
Page 550
1800 - Extension Options 1802 - Extension Options (Part 1) 542Chapter 2: ProgrammingDS1000/2000 Software Manual 2. 1802 + HOLD 3. Enter the extension number (300-395 in DS2000 or 300-325 in DS1000) you want to program + HOLD OR Press HOLD to select extension 300. The previously programmed value displays. 4. Enter the Y to enable or N to disable Do Not Disturb + VO L OR Press VO L to leave the current assignment unchanged The previously programmed value displays. 5. Enter the extension’s Ring...