NEC Ds2000 Software Instructions Manual

0600 - Toll Restriction
0601 - Toll Restriction Options
DS1000/2000 Software Manual Chapter 2: Programming493
International Dialing
8. Enter Y to enable or N to disable International Dialing + 
VO L .
OR
Press 
VO L  to select the currently displayed value.
The previously programmed table type displays (A = allow, D = deny).
Equal Access (10XXX) Dialing
9. Enter A to set up the table as an allow table.
OR
Enter D to set up the table as a deny table.
OR
Enter D to convert an existing allow table into a...

0600 - Toll Restriction
0601 - Toll Restriction Options
494Chapter 2: ProgrammingDS1000/2000 Software Manual
OR
Press D to delete codes from the table.
OR
Press V to view the current contents of the table.
If you press V to view the table, the bottom line of the display will show the first set of 
table entries. Press V to see the remaining entries. The prompt 
TABLE DONE tells you 
when you are at the end of the table or the table is empty. The prompt 
> tells you that there 
is additional data in the...

0600 - Toll Restriction
0601 - Toll Restriction Options
DS1000/2000 Software Manual Chapter 2: Programming495
Enter D to set up the table as a deny table.
OR
Enter D to convert an existing allow table into a deny table, or enter A to convert an 
existing deny table into an allow table.
19. Press A to add codes into the table.
OR
Press D to delete codes from the table.
OR
Press V to view the current contents of the table.
If you press V to view the table, the bottom line of the display will show the first...

0800 - Display Messages
0801 - Selectable Display Messages
496Chapter 2: ProgrammingDS1000/2000 Software Manual
0800 - Display Messages
0801 - Selectable Display Messages
Description
Use Program 0801 - Selectable Display Messages to program the system’s 16 Selectable Display 
Messages. Each message can be up to 20 characters long, including a blank spaces you may want to 
ad for readability. All messages are appendable by user-entered digits.
When entering names, use Table 19: Keys for Entering Names on...

0800 - Display Messages
0801 - Selectable Display Messages
DS1000/2000 Software Manual Chapter 2: Programming497
Telephone Programming Instructions
1. Enter the programming mode.
2. 0801 + 
HOLD
3. Enter the number of the message you want to program + HOLD.
 The previously programmed message displays.
4. Enter the new display message + 
HOLD.
OR
Press 
HOLD to leave the current value unchanged.
0801:DISPLAY MESSAGE
MESSAGE NUM?
0801:DISPLAY MESSAGE
(message text)
0801:DISPLAY MESSAGE
MESSAGE NUM? 

1000 - Trunk Programming
1001 - Trunk Port Description
498Chapter 2: ProgrammingDS1000/2000 Software Manual
1000 - Trunk Programming
1001 - Trunk Port Description
Description
Use Program 1001 - Trunk Port Description to program various options for trunks ports. 
Note: If you are doing extensive programming, you may find Program 9801 - Copy Command 
(page 557) saves you time when customizing this option.
Also see Program 1003 - Trunk Options on page 509.
Conditions
Per FCC regulations, do not set 1001-...

1000 - Trunk Programming
1001 - Trunk Port Description
DS1000/2000 Software Manual Chapter 2: Programming499
Trunk Transmit  GainUse this option to set the trunk’s transmit 
gain. This gain setting allows you to com-
pensate for the transmit gain characteristics 
of the connected telco or PBX. The setting is 
applied to each line seizure.
• See Central Office Calls, Answering on 
page 87 for more.
• See Central Office Calls, Placing on 
page 93 for more.
•
• See PBX/Centrex Compatibility on 
page 291 for...

1000 - Trunk Programming
1001 - Trunk Port Description
500Chapter 2: ProgrammingDS1000/2000 Software Manual
TRANSMIT GAIN? 
(Cont’d)
31 = .5 dB loss
32 = 1 dB loss
33 = 1.5 dB loss
34 = 2 dB loss
35 = 2.5 dB loss
36 = 3 dB loss
37 = 3.5 dB loss
38 = 4 dB loss
39 = 4.5 dB loss
40 = 5 dB loss
41 = 5.5 dB loss
42 = 6 dB loss
43 = 6.5 dB loss
44 = 7 dB loss
45 = 7.5 dB loss
46 = 8 dB loss
47 = 8.5 dB loss
48 = 9 dB loss
49 = 9.5 dB loss
50 = 10 dB loss
51 = 10.5 dB loss
52 = 11 dB loss
53 = 11.5 dB loss
54...

1000 - Trunk Programming
1001 - Trunk Port Description
DS1000/2000 Software Manual Chapter 2: Programming501
Trunk Receive GainUse this option to set the trunk’s receive 
gain. This gain setting allows you to com-
pensate for the receive gain characteristics of 
the connected telco or PBX. The setting is 
applied to each line siezure.
• See Central Office Calls, Answering on 
page 87 for more.
• See Central Office Calls, Placing on 
page 93 for more.
• See PBX/Centrex Compatibility on 
page 291 for...

1000 - Trunk Programming
1001 - Trunk Port Description
502Chapter 2: ProgrammingDS1000/2000 Software Manual
RECEIVE GAIN? 
(Cont’d)
31 = .5 dB loss
32 = 1 dB loss
33 = 1.5 dB loss
34 = 2 dB loss
35 = 2.5 dB loss
36 = 3 dB loss
37 = 3.5 dB loss
38 = 4 dB loss
39 = 4.5 dB loss
40 = 5 dB loss
41 = 5.5 dB loss
42 = 6 dB loss
43 = 6.5 dB loss
44 = 7 dB loss
45 = 7.5 dB loss
46 = 8 dB loss
47 = 8.5 dB loss
48 = 9 dB loss
49 = 9.5 dB loss
50 = 10 dB loss
51 = 10.5 dB loss
52 = 11 dB loss
53 = 11.5 dB loss
54 =...