NEC Ds2000 Software Instructions Manual
Here you can view all the pages of manual NEC Ds2000 Software Instructions Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 471
0400 - Timers 0402 - Trunk Timers DS1000/2000 Software Manual Chapter 2: Programming463 Speed Dial DTMF Tone OffThis timer sets the duration the quiet time between DTMF digits for Speed Dial trunk calls automatically dialed by the system. Set this timer for compatibility with the con- nected telco or PBX/Centrex. If you set this interval too short, the telco or PBX/Centrex may not be able to set up to receive the next DTMF digit. If too long, outbound dialing is unnecessarily slowed down. • See...
Page 472
0400 - Timers 0402 - Trunk Timers 464Chapter 2: ProgrammingDS1000/2000 Software Manual Far End DisconnectUse this timer to set the loop disconnect interval for trunk calls. If the system detects a loop current interruption longer than this interval it assumes the telco has discon- nected the trunk. It then returns the trunk trunk to idle. Set this interval for compatibility with the connected telco or PBX/Centrex. If you set this interval too short, the system may inad- vertently disconnect valid...
Page 473
0400 - Timers 0402 - Trunk Timers DS1000/2000 Software Manual Chapter 2: Programming465 Telephone Programming Instructions 1. Enter the programming mode. 2. 0402 + HOLD 3. Enter data for the displayed timer + HOLD. OR Press VO L or VO L to scroll to the timer you want to change + HOLD 4. Enter data for the displayed timer + HOLD 5. Press VO L or VO L to scroll to another timer. OR Press HOLD to return to step 2 and enter another program number. Ground Start TimerBefore the system can start a...
Page 474
0400 - Timers 0403 - Station Timers 466Chapter 2: ProgrammingDS1000/2000 Software Manual 0403 - Station Timers Description Use Program 0403- Station Timers to enter the values for station timers. Conditions NoneDS2000 Fixed Slot Available. DS2000 U Slot DS1000 Table 26: Program 0403 - Station Timers OptionDescriptionEntriesDefault Hold Recall Use this timer to set how long a call stays on Hold before it recalls the extension that ini- tially placed it on Hold. • See Hold on page 197 for more.HOLD...
Page 475
0400 - Timers 0403 - Station Timers DS1000/2000 Software Manual Chapter 2: Programming467 Call Waiting Tone IntervalUse this timer to set the interval between Call Waiting tones. • See Call Waiting / Camp-On on page 74 for more. Also use this timer to set the interval between Off Hook Signaling alert tones. • See Off-Hook Signaling on page 270 for more.CL WAIT INTIRVL?0-9999 sec.10 sec. Call Coverage DelayFor extensions with Delayed Ringing Call Coverage keys, this timer sets how long a call...
Page 476
0400 - Timers 0403 - Station Timers 468Chapter 2: ProgrammingDS1000/2000 Software Manual Telephone Programming Instructions 1. Enter the programming mode. 2. 0403 + HOLD 3. Enter data for the displayed timer + HOLD. OR Press VO L or VO L to scroll to the timer you want to change + HOLD 4. Enter data for the displayed timer + HOLD 5. Press VO L or VO L to scroll to another timer. OR Press HOLD to return to step 2 and enter another program number. Ring No Answer HuntUse this timer to set the...
Page 477
0400 - Timers 0404 - Analog Station Timers DS1000/2000 Software Manual Chapter 2: Programming469 0404 - Analog Station Timers Description Use 0404: Analog Station Timers to set parameters and timers for ASTU PCBs. Conditions NoneDS2000 Fixed Slot Available. DS2000 U Slot DS1000 OptionDescriptionEntriesDefault Country Data Use this option to define the country of use and the codec digitizing method for ASTU PCBs. This timer consists of two bits (xy), with bit x defining the country and bit y defining...
Page 478
0400 - Timers 0404 - Analog Station Timers 470Chapter 2: ProgrammingDS1000/2000 Software Manual Maximum Break TimeThis timer defines the maximum amount of time the loop must be opened to properly decode the dial pulse digits sent from analog devices connected to ASTU PCBs. Change this value only if the connected analog devices are set to dial at a rate other than 10 PPS.MAX BREAK TIME?1-255 (5-1275 mS in 5 mS increments [e.g., 2 = 10mS, 3 = 15 mS, 4 = 20 mS)20 (100 mS) Minimum Make TimeThis...
Page 479
0400 - Timers 0404 - Analog Station Timers DS1000/2000 Software Manual Chapter 2: Programming471 Telephone Programming Instructions 1. Enter the programming mode. 2. 0404 + HOLD 3. Enter data for the displayed timer + HOLD. OR Press VO L or VO L to scroll to the timer you want to change + HOLD 4. Enter data for the displayed timer + HOLD 5. Press VO L or VO L to scroll to another timer. OR Press HOLD to return to step 2 and enter another program number. Off-Hook Guard TimeThe ASTU PCB waits...
Page 480
0500 - System Numbering 0501 - Numbering Plan 472Chapter 2: ProgrammingDS1000/2000 Software Manual 0500 - System Numbering 0501 - Numbering Plan Description Use Program 0501- Numbering Plan to customize the system’s number plan. For each dialed digit (0-9, excluding # and *), assign a Function Type and an Expected Digits entry. Function Type defines the digit’s function in the system (see the table below). Expected Digits sets how many digits the system expects to receive when the digit string begins...