NEC Ds2000 Software Instructions Manual

0500 - System Numbering
0501 - Numbering Plan
DS1000/2000 Software Manual Chapter 2: Programming473
Digit 1 OptionsUse this option to define the function type 
for dial strings beginning with 1. These 
strings are normally reserved for Intercom 
access (2).
• See Intercom on page 227 for more.EXT1 = OPER
2 = EXT
3 = LN GRP2 (EXT)
Use this option to define the total length of 
dial strings beginning with 1. These strings 
are normally three digits long (3).
• See Intercom on page 227 for more.
EXPECTED...

0500 - System Numbering
0501 - Numbering Plan
474Chapter 2: ProgrammingDS1000/2000 Software Manual
Digit 5 OptionsUse this option to define the function type 
for dial strings beginning with 5. These 
strings are normally reserved for Intercom 
access (2).
• See Intercom on page 227 for more.EXT1 = OPER
2 = EXT
3 = LN GRP2 (EXT)
Use this option to define the total length of 
dial strings beginning with 5. These strings 
are normally three digits long (3).
• See Intercom on page 227 for more.
“5” EXPECTED...

0500 - System Numbering
0501 - Numbering Plan
DS1000/2000 Software Manual Chapter 2: Programming475
Telephone Programming Instructions
1. Enter the programming mode.
2. 0501 + 
HOLD
3. Enter data for the displayed option + VO L .
OR
Press 
VO L  or VO L  to scroll to the option you want to change + HOLD
4. Enter data for the displayed option + HOLD
5. Press VO L  or VO L  to scroll to another option.
OR
Press 
CONF to return to step 2 and enter another program number.
Single Digit AccessUse this...

0500 - System Numbering
0504 - Trunk Port Extension Numbers (Fixed Slot)
476Chapter 2: ProgrammingDS1000/2000 Software Manual
0504 - Trunk Port Extension Numbers (Fixed Slot)
Description
Use Program 0504- Trunk Port Extension Numbers to assign extension numbers to trunk ports. 
The extension numbers you enter must be unique and not overlap extension numbers used for 
extensions, ACI ports, DCI ports and Extension Hunting master numbers. 
Ports 001 -016 are the system’s physical trunk ports.
Conditions...

0500 - System Numbering
0504 - Trunk Port Extension Numbers (Fixed Slot)
DS1000/2000 Software Manual Chapter 2: Programming477
The previously programmed name displays.
5. Return to step 3 and enter another trunk port.
OR
Press 
HOLD to return to step 2 and enter another program number. 

0500 - System Numbering
0504 - View Extension (U Slot and DS1000)
478Chapter 2: ProgrammingDS1000/2000 Software Manual
0504 - View Extension (U Slot and DS1000)
Description
Use Program 0504- View Extension to view the extension assignments for each port (circuit) for 
each PCB.
Conditions
None
Telephone Programming Instructions
1. Enter the programming mode.
2. 0504 + 
HOLD
3. Enter the number of the trunk (401-448 in DS2000 or 401-406 in DS1000) or extension (300-
395 in DS2000 or 300-325 in DS1000)...

0500 - System Numbering
0504 - View Extension (U Slot and DS1000)
DS1000/2000 Software Manual Chapter 2: Programming479
SLOT is the Main Equipment Cabinet slot where the extension or trunk is located. 
CIRCUIT is the port (circuit) on the PCB assigned to the slot.
In DS1000, you see:
The system shows the associated port number. 
4. Press 
HOLD and return to step 3 above to view another extension or trunk.
OR
Press 
CONF to exit.
0504:EXTENSION:nnn
nnnnnn nn 

0500 - System Numbering
0505 - Station Port Extension Numbers (Fixed Slot)
480Chapter 2: ProgrammingDS1000/2000 Software Manual
0505 - Station Port Extension Numbers (Fixed Slot)
Description
Use Program 0505- Station Port Extension Numbers to assign extension numbers to station 
ports. The extension numbers you enter must be unique and not overlap extension numbers used for 
trunks, ACI ports, DCI ports and Extension Hunting master numbers.
Ports 001-096 are the system’s physical extension ports....

0500 - System Numbering
0505 - Station Port Extension Numbers (Fixed Slot)
DS1000/2000 Software Manual Chapter 2: Programming481
you don’t undefine the ports first, you will see the message EXT ALREADY EXISTS!
5. Return to step 3 and enter another station port.
OR
Press 
HOLD to return to step 2 and enter another program number. 

0500 - System Numbering
0505 - Extension Assignment (U Slot and DS1000)
482Chapter 2: ProgrammingDS1000/2000 Software Manual
0505 - Extension Assignment (U Slot and DS1000)
Description
In DS2000, use Program 0505- Extension Assignment to view and change the extension or trunk 
number assigned to a port (circuit) on an installed PCB. You make the selection based on slot and 
port (circuit) number.
In DS1000, use Program 0505 - Extension Assignment to view and change the extension number 
for each...